Re: [proxyTools-users] ISA server problem ????

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

My questions:
1) why do you want ftp? Ftp is difficult to set up in that kind 
of environment, even with LP. Many ftp archives these days also 
offer http access; are you sure that possibility won't work for 
you?
>>> http has no problems, but as i often use to download
    lot of project work with large file sizes and ofcourse 
    i use kazaa or any other p2p applications/utilities
    on my workstation....

2) you should confirm that the relevant ports are actually
blocked 
by your firewall. Run master.pl to see this.
>>> as you can see the results of various utilities pasted below
    and yes that particular port is blocked....

3) LP could only be used to give you an ftp service, if the http

proxy you use allows CONNECT, and even then it is difficult to 
arrange (and I would need to add some code to LP). So far, this 
hasn't been necessary. Use statProxy to see if your proxy has 
this capability.
>>> i have tried and also you can see the result output below...

4) Does your proxy need a password? If so, do you know if it 
requires NTLM authentication?
>>>  no it does not....

ONE MORE QUESTION , A GENERAL ONE, AND MAY BE YOU BE ABLE TO
HELP...
I ALSO RUN A LINUX WORKSTATION, I CAN PING OTHER HOSTS AND ALSO
THE ISA SERVER BUT I CANT BROWSE, DOES THIS HAVE TO DO ANYTHING
WITH THE ISA SERVER, IS THERE ANY SETTING OR CANT DO?

THANKS
NJ

***********************************************************************

D:\bakup\local-proxy\winbin>statproxy 192.168.0.1:8080
Can't find your name server(s) using nslookup, ipconfig /all
etc.
Warning: If you are testing any proxy through a redirector,
the proxy anonymity test will reveal your true IP address.
Normally you would be connecting directly to the proxy for these
tests anyway, so it doesn't matter. The test won't work if you
block incoming connections with a firewall, or a NAT.
I will disable the anonymity test if you wish.
Disable anonymity test (y or [n])? n
Extracting proxy strings, safeing, expanding/skipping ports,
validating, resolving, deduping...
1 proxies to test (after processing)
ctrl-c to see results so far; double-ctrl-c to abort
Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Can't find your
name server(s) usi
ng nslookup, ipconfig /all etc.
Can't find your name server(s) using nslookup, ipconfig /all
etc.
14 15 16 17 18 Can't find your name server(s) using nslookup,
ipconfig /all etc.

19 192.168.0.1:8080
statProxy v4.143 report from 192.168.0.37(User0):
192.168.0.1     :8080  PFFFFFFPFFFFPPPPFP P 9.0/14.0 via:1.0
PNSERVER
Reference page size was 14014 bytes
Wall clock time:   1.1 mins.

Results have also been written to file statProxy.2003.4.23.1.out

This exe file was created with the evaluation version of
Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second
delay.)
...

D:\bakup\local-proxy\winbin>ipconfig/all

Windows IP Configuration

        Host Name . . . . . . . . . . . . : stigmatik
        Primary Dns Suffix  . . . . . . . :
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : 3Com EtherLink XL
10/100 PCI TX NIC
(3C905B-TX)
        Physical Address. . . . . . . . . : 00-10-4B-61-F5-20
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.0.37
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.0.1

D:\bakup\local-proxy\winbin>master
Can't find your name server(s) using nslookup, ipconfig /all
etc.
Can't find your name server(s) using nslookup, ipconfig /all
etc.
Can't find your name server(s) using nslookup, ipconfig /all
etc.
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
waiting for name server ...
^C

D:\bakup\local-proxy\winbin>statProxy -t 0 -C 213.42.1.171:8080
192.168.0.1:8080

Tests done via CONNECT (thru 213.42.1.171:8080)
Can't find your name server(s) using nslookup, ipconfig /all
etc.
Extracting proxy strings, safeing, expanding/skipping ports,
validating, resolving, deduping...
1 proxies to test (after processing)
ctrl-c to see results so far; double-ctrl-c to abort
Running test: 0 Can't connect to CONNECT proxy - refused

statProxy v4.143 report from 192.168.0.37(User0):
192.168.0.1     :8080  R                    ?/?
Wall clock time: 0.081 mins.

Results have also been written to file statProxy.2003.4.23.2.out

This exe file was created with the evaluation version of
Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second
delay.)
...

D:\bakup\local-proxy\winbin>

**********************************************************************

=====
     <(@ ! @)> 
__oooo__oooo__ 
   take care & 
    PLAY SAFE

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com