Menu
▾
▴
[proxyTools-users] DONE--Re: [noCensorship] Re: LP
|
From: gstmoderator <gst...@ho...> - 2003-03-31 01:37:42
|
wayne- thanks for your help. running JAP I was having same problem. Turns out now I'm on a LAN and locations to set my proxy were different. No problem. thanks again. ----- Original Message ----- From: "gstmoderator" <gst...@ho...> To: <noc...@fr...>; <pro...@sf...> Sent: Sunday, March 30, 2003 7:21 PM Subject: [noCensorship] Re: LP > > > ----- Original Message ----- > From: "wayne" <wa...@ny...> > To: <noc...@fr...>; <pro...@sf...> > Sent: Sunday, March 30, 2003 6:45 PM > Subject: [noCensorship] Re: LP > > > > > From: "gstmoderator" <gst...@ho...> > > > To: <noc...@fr...> > > > Subject: [noCensorship] Re: LP > > > > > > > > Reinstalled LP after a move an OS upgrade and ten months or so can't > get > > > LP to merge new proxies and save new configuration on restart no proxies > > > saved and privacy analyzer traces directly to my isp. > > > > > > > > We'll need some more info. > > > > > > > > 1) What operating system? > > > > > > XP > > > > > > > > 2) What error messages (if any)? Look at the localProxy log windows > > > > to see these. > > > > > > > > > > None > > > > None? > > Strange. > > > > I meant the normal logs in the LP GUI log window. Two windows open > > when you start it, right? One of them is the GUI, the other looks > > like a command window. The 'command window' logs what happens in > > the GUI. It's impossible that there's nothing in this - please look > > again. > > > > A further window opens when you click 'start services'. That one > > logs what happens in the back end. > > > > Posting that huge saved config was pointless. > > There appears to be a heap of stuff missing from it. > > Losing the indentation makes it unreadable too. > > > > 1. open lp using saved config > 2. put proxies in box from hat 141.150.149.247:80, 208.49.206.97:80, > 204.196.215.9:80, 64.48.186.225:80, 208.218.142.13:80 Echo= 11687 > 3. push test/merge > 4. localproxy2 window log > > This is localProxy Engine (the 'back end'), version: 4.214 > Loading configuration saved > Waiting for the front end to connect ... connected > Checking all layer 0 hosts for connectivity... > Couldn't connect to 33 proxies > Don't panic, I can probably work ok without them > > LocalProxy is offering services on the following ports: > 10076:non-censoring HTTPS proxy > 10077:PROPFIND capable HTTP proxy > 10078:HTTP zapped advertisement proxy > 10079:proxy autoconfiguration > 10080:anonymous, non-censoring HTTP proxy - standard > 10081:localProxy control > 10082:non-censoring HTTP proxy - standard > 10119:Usenet news - panix > 11119:Usenet news - mozilla > > > For web browser proxy service, please configure your web browser > http proxy entry to localhost:10082 and the > https proxy entry to localhost:10076 now > > 5. localproxy log > > This is localProxy GUI (the 'front end'), version: 4.247 > Proxies found in environment: none > I'm assuming this IP address is 192.168.1.101 > I'm assuming this IP address is 192.168.1.101 > Setting default config syria-scs-net > Starting localProxy engine with configuration: saved > start line: perl localProxy2.pl -x 0 -g -d 0 -c saved > running localProxy2.exe > Checking proxy capabilities ... > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.22.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 141.150.149.247 :80 FFFFFFFFFFFFF FFFFFF 1.2/? > Wall clock time: 0.71 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.23.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 208.49.206.97 :80 FFFFFFFFFFFFF FFFFFF 1.4/? > Wall clock time: 1.4 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.24.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 204.196.215.9 :80 FFFFFFFFFFFFF FFFFFF 1.3/? > Wall clock time: 0.72 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.25.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 64.48.186.225 :80 FFFFFFFFFFFFF FFFFFF 1.3/? > Wall clock time: 0.71 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.26.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 208.218.142.13 :80 FFFFFFFFFFFFF FFFFFF 1.3/? > Wall clock time: 0.77 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 1 proxies to test (after processing) > ctrl-c to see results so far; double-ctrl-c to abort > Running test: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 > 19 Results have also been written to file statProxy.2003.3.30.27.out > > statProxy v4.143 report from 192.168.1.101(syria-scs-net): > 208.253.92.46 :8080 FFFFFFFFFFFFF FFFFFF ?/? > Wall clock time: 4.8 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Extracting proxy strings, safeing, expanding/skipping ports, > validating, resolving, deduping... > 0 proxies to test (after processing) > Nothing to test > Results have also been written to file statProxy.2003.3.30.28.out > Wall clock time: 0.022 mins. > > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > Done ... writing results to tests-userSpecd.txt > MergeHosts.pl v4.48 > merging tests-userSpecd.txt to config-saved.xml > (saving original config-saved.xml in config-saved.old.xml) > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > Test location firewall: syria-scs-net > Ignoring all test results (except uptime and socks) for any > hosts on port 80 - known transparent proxy > > This exe file was created with the evaluation version of Perl2Exe. > For more information visit http://www.indigostar.com > (The full version does not display this message with a 2 second delay.) > ... > > > > 6. none of proxies are then used during internet or when I close and restart > LP using saved config (no error stats) > > > > > 3) Where exactly are you looking to be able to say 'can't get LP to > > > > merge new proxies' and 'no proxies saved'? > > > > Which config are you expecting to see these in? > > > > > > used autoconfig and test/merge to add proxies put into box above > buttons. > > > restarted LP using auto, last, saved, User0, wayne-adsl configs, clicked > > > update new proxies button says something like complete no proxies > merged/no > > > proxies to check > > > > > > > > > > > 4) There's no 'save new configuration' option. What are you > > > > referring to? The 'autoconfigure' button sounds like what you want > > > > - is that what you are trying? The firewall blocking info and proxy > > > > test results will appear in the 'auto' configuration. You should > > > > then ask LP to rebuild for that configuration. > > > > > > > > If you mean 'save running configuration', then that's > > > > probably not what you want - it just saves the running info (the > > > > stuff LP has learned while you're using it). You can use this next > > > > time by choosing the 'saved' configuration. > > > > > > meant save running config loaded saved config and no proxies were merged > > > > That's right. > > Did you think they would be, if you 'saved' and reloaded? > > Why? > > When you load the 'saved' config, LP is running as it was when > > you saved it! > > This sounds like it has nothing to do with your problem. > > > > > > The 'test/merge new proxies' button tests the proxies in the field > > > > above it (which you may edit) and merges the results to whatever > current > > > > configuration has been selected. By default, the proxies in the field > > > > are initialized by looking in the registry and the environment. > > > > > > > > Generally, these options use master.pl/exe and statProxy.pl/exe. > > > > You could independently verify that these are working by simply > > > > running them. > > > > > > > > > > master.pl opens and tests all proxies as to merge, saves to auto or > config I > > > use > > > > Since you have the exe, you wouldn't be running master.pl. > > In fact, master doesn't run at all when you click > > 'test/merge new proxies'. > > Master doesn't actually test proxies (it calls statProxy for that), > > and doesn't do any merging. It's main function is to test the > > firewall blocking. > > > > Let's clarify: > > 1) you enter proxies into the field above 'test/merge new proxies' > > Or you leave the entries that are already there. Use the right format: > > proxy.xxx.com:8000, proxy2.yyy.etc:8999 > > etc. (say). > > yes > > > 2) you click 'test/merge new proxies' > > yes > > > 3) a window opens (or appears on the task bar?). On XP, I think > > it should have a title containing the command used to run it. > > Warning, I don't have an XP system to test on, so I can't be > > precise here. This might be the area where the problem lies - the > > window/icon may not be appearing at all. I had some XP problems here > > before. If that's the case, I'll need to find an XP system. > > window opens if I run Autoconfigure instead of test/merge > > > 4) in that window, you should be able to watch statProxy testing your > > proxies. If it closes too quickly, you probably gave it a bad proxy > > format. If the reason is not obvious, I suggest you run statProxy > > by itself in a command window with the proxy format you used to see > > what error is reported. > > see above--no errors > > > 5) the merge of these results to a config are done back in the GUI > > (by calling mergeHosts). > > > > I'll wait to hear what the log window contains. > > like I said, I've run LP on XP though it was .pl not .exe. > > > > > > > Try the 'help' button to get more details. > > yes > > > > > You did look at this, I guess? > > > > > > 5) Which LP are you using (version number, executable or source)? > > > > > > 4.247 exe I think > > > > Damn, that makes things difficult. > > > > > > 6) You might be able to run the GUI window (localProxy.pl or .exe) > > > > with debug turned on - later versions only. > > > > > > > > 7) During the above tests, there are various files created and saved. > > > > The easy way to find them is by modification/creation date. See if > > > > they contain the proxies you expected. Let us know what happened. > > > > > > config-saved attachd > > > > Did you find any files created/modified? > > > > > > 8) PLEASE post some logs! > > > > > > tried logging nothing happened > > > > That 'logging' is only effective when the back end has started up. > > It increases the verbosity o fthe logs to include all data passing > > through LP. > > > > See above. > > > > > Thnks wayne > > > > thanks again > > > -- > > wa...@ny... > > http://proxytools.sourceforge.net/ > > ===8>============== noCensorship community =============== > > List's webpage: http://www.freelists.org/webpage/nocensorship > > List's archive: http://www.freelists.org/archives/nocensorship > > To unsubscribe: noc...@fr... with 'unsubscribe' in > the SUBJECT field. > > Moderator's email: noc...@fr... > > ===8>============== noCensorship community =============== > > > > > > > ===8>============== noCensorship community =============== > List's webpage: http://www.freelists.org/webpage/nocensorship > List's archive: http://www.freelists.org/archives/nocensorship > To unsubscribe: noc...@fr... with 'unsubscribe' in the SUBJECT field. > Moderator's email: noc...@fr... > ===8>============== noCensorship community =============== > > > |
