[postfixadmin:bugs] Re: #319 dovecot:CRYPT-METHOD does not work

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Thank you very much. I did not realize there is a newer virsion.

Best regards,

On May 5, 2017 01:45, "Christian Boltz" <chr...@us...>
wrote:

> There's an easier solution - update to PostfixAdmin 3.0.x which already
> uses the '-t' option and is therefore able to handle most dovecot hashing
> methods (except a few where the username is mixed into the hash) ;-)
> ------------------------------
>
> * [bugs:#319] <https://sourceforge.net/p/postfixadmin/bugs/319/>
> dovecot:CRYPT-METHOD does not work*
>
> *Status:* closed-invalid
> *Group:* v2.91 (3.0 beta1)
> *Created:* Fri May 30, 2014 11:05 PM UTC by Paul
> *Last Updated:* Thu May 04, 2017 01:57 PM UTC
> *Owner:* nobody
>
> I have not been able to get dovecot:CRYPT-METHOD to work (tried
> SHA512-CRYPT, SHA256-CRYPT, MD5-CRYPT, and BLF-CRYPT, which I learned isn't
> supported in my OS). Using one results in the following error message when
> setting up admin account with setup.php:
>
> can't encrypt password with dovecotpw, see error log for details
>
> This is what the logs state:
> 1624#0: *6 FastCGI sent in stderr: "PHP message: dovecotpw password
> encryption failed.
>
> PHP message: STDERR output: sh: 1: /usr/sbin/doveadm: not found" while
> reading response header from upstream <...> upstream:
> "fastcgi://unix:/var/run/php5-fpm.sock:" <...>
>
> In config.inc.php I see:
>
> // If you use the dovecot encryption method: where is the dovecotpw binary
> located?
> // for dovecot 1.x
> // $CONF['dovecotpw'] = "/usr/sbin/dovecotpw";
> // for dovecot 2.x (dovecot 2.0.0 - 2.0.7 is not supported!)
> $CONF['dovecotpw'] = "/usr/sbin/doveadm pw";
>
> A couple quick checks:
> # ll /usr/sbin/doveadm
> -rwxr-xr-x 1 root root 423264 Feb 13 23:23 /usr/bin/doveadm*
>
> # doveadm pw -l
> CRYPT MD5 MD5-CRYPT SHA SHA1 SHA256 SHA512 SMD5 SSHA SSHA256 SSHA512 PLAIN
> CLEAR CLEARTEXT PLAIN-TRUNC CRAM-MD5 SCRAM-SHA-1 HMAC-MD5 DIGEST-MD5
> PLAIN-MD4 PLAIN-MD5 LDAP-MD5 LANMAN NTLM OTP SKEY RPA SHA256-CRYPT
> SHA512-CRYPT
>
> Using Dovecot 2.2, PHP 5.5, MariaDB 10, Postfix 2.11.
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/postfixadmin/bugs/319/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
>

---

** [bugs:#319] dovecot:CRYPT-METHOD does not work**

**Status:** closed-invalid
**Group:** v2.91 (3.0 beta1)
**Created:** Fri May 30, 2014 11:05 PM UTC by Paul
**Last Updated:** Thu May 04, 2017 04:45 PM UTC
**Owner:** nobody

I have not been able to get dovecot:CRYPT-METHOD to work (tried SHA512-CRYPT, SHA256-CRYPT, MD5-CRYPT, and BLF-CRYPT, which I learned isn't supported in my OS). Using one results in the following error message when setting up admin account with setup.php:

can't encrypt password with dovecotpw, see error log for details

This is what the logs state:
1624#0: *6 FastCGI sent in stderr: "PHP message: dovecotpw password encryption failed.

PHP message: STDERR output: sh: 1: /usr/sbin/doveadm: not found" while reading response header from upstream <...> upstream: "fastcgi://unix:/var/run/php5-fpm.sock:" <...>

In config.inc.php I see:

// If you use the dovecot encryption method: where is the dovecotpw binary located?
// for dovecot 1.x
// $CONF['dovecotpw'] = "/usr/sbin/dovecotpw";
// for dovecot 2.x (dovecot 2.0.0 - 2.0.7 is not supported!)
$CONF['dovecotpw'] = "/usr/sbin/doveadm pw";

A couple quick checks:
\# ll /usr/sbin/doveadm
-rwxr-xr-x 1 root root 423264 Feb 13 23:23 /usr/bin/doveadm*

\# doveadm pw -l
CRYPT MD5 MD5-CRYPT SHA SHA1 SHA256 SHA512 SMD5 SSHA SSHA256 SSHA512 PLAIN CLEAR CLEARTEXT PLAIN-TRUNC CRAM-MD5 SCRAM-SHA-1 HMAC-MD5 DIGEST-MD5 PLAIN-MD4 PLAIN-MD5 LDAP-MD5 LANMAN NTLM OTP SKEY RPA SHA256-CRYPT SHA512-CRYPT

Using Dovecot 2.2, PHP 5.5, MariaDB 10, Postfix 2.11.

---

Sent from sourceforge.net because pos...@li... is subscribed to https://sourceforge.net/p/postfixadmin/bugs/

To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/postfixadmin/admin/bugs/options.  Or, if this is a mailing list, you can unsubscribe from the mailing list.