hi,
i'm using a USB Gravis Eliminator AfterShock. of course i tested the
controllers configuration with its calibration software; all buttons and
axes reported OK when testing with its calibration software. so the
controller is good.
axes[4] reports the min value and never changes. i commented out one of the
other axis assignment in rawRead(), and it reproduced the error for that
particular axis. so my conclusion is that somehow the axes[4] is not
getting data from the controller. how/why this is happening, i couldn't
figure it out?
with jstest, i switched one of the control pads, that worked on axes[1] and
axes[2], to axes[4] and axes[5]... same results--axes[4] didn't report its
values. so, i'm convinced its not my controller.
josh
At 03:35 PM 2/27/2002 -0600, Steve Baker wrote:
>"Joshua J. Eliason" wrote:
>
> > on win32, i cannot get the js class to report anything for axes[4]; it's as
> > if js.dwUpos contains nothing. axes[5] works though.
>
>I can't help you with this one (because I don't use Windoze) - but it might
>help other people on this list if you could tell us what joystick you have,
>how it's connected into the PC (eg Sound Card, USB, etc) and what the jstest
>program shows up.
>
>----------------------------- Steve Baker -------------------------------
>Mail : <sjb...@ai...> WorkMail: <sj...@li...>
>URLs : http://www.sjbaker.org
> http://plib.sf.net http://tuxaqfh.sf.net http://tuxkart.sf.net
> http://prettypoly.sf.net http://freeglut.sf.net
> http://toobular.sf.net http://lodestone.sf.net
|
