[Pikloops-svn] SF.net SVN: pikloops:[192] prog/trunk
Brought to you by:
dionysos-sf
Menu
▾
▴
[Pikloops-svn] SF.net SVN: pikloops:[192] prog/trunk
|
From: <az...@us...> - 2012-10-14 23:26:25
|
Revision: 192
http://pikloops.svn.sourceforge.net/pikloops/?rev=192&view=rev
Author: azhyd
Date: 2012-10-14 23:26:14 +0000 (Sun, 14 Oct 2012)
Log Message:
-----------
ported to KDE4
Modified Paths:
--------------
prog/trunk/INSTALL
prog/trunk/NEWS
prog/trunk/po/de.po
prog/trunk/po/es.po
prog/trunk/po/fr.po
prog/trunk/po/pikloops.pot
prog/trunk/src/gqtextedit.cpp
prog/trunk/src/gqtextedit.h
prog/trunk/src/main.cpp
prog/trunk/src/mainwidgetpl.cpp
prog/trunk/src/mainwidgetpl.h
prog/trunk/src/pikloops.cpp
prog/trunk/src/pikloops.h
prog/trunk/src/pikloopsui.rc
Added Paths:
-----------
prog/trunk/CMakeLists.txt
prog/trunk/config.h.cmake
prog/trunk/doc/CMakeLists.txt
prog/trunk/doc/en/CMakeLists.txt
prog/trunk/doc/fr/CMakeLists.txt
prog/trunk/pikloops.kdev4
prog/trunk/po/CMakeLists.txt
prog/trunk/po/extract-messages.sh
prog/trunk/src/CMakeLists.txt
Removed Paths:
-------------
prog/trunk/Makefile.am
prog/trunk/Makefile.dist
prog/trunk/README
prog/trunk/TODO
prog/trunk/admin/Doxyfile.am
prog/trunk/admin/Doxyfile.global
prog/trunk/admin/Makefile.common
prog/trunk/admin/acinclude.m4.in
prog/trunk/admin/am_edit
prog/trunk/admin/bcheck.pl
prog/trunk/admin/compile
prog/trunk/admin/conf.change.pl
prog/trunk/admin/config.guess
prog/trunk/admin/config.pl
prog/trunk/admin/config.sub
prog/trunk/admin/configure.in.bot.end
prog/trunk/admin/configure.in.min
prog/trunk/admin/cvs.sh
prog/trunk/admin/debianrules
prog/trunk/admin/depcomp
prog/trunk/admin/deps.am
prog/trunk/admin/detect-autoconf.pl
prog/trunk/admin/doxygen.sh
prog/trunk/admin/install-sh
prog/trunk/admin/libtool.m4.in
prog/trunk/admin/ltmain.sh
prog/trunk/admin/missing
prog/trunk/admin/mkinstalldirs
prog/trunk/admin/nmcheck
prog/trunk/admin/oldinclude.m4.in
prog/trunk/admin/pkg.m4.in
prog/trunk/admin/ylwrap
prog/trunk/configure.in.in
prog/trunk/doc/Makefile.am
prog/trunk/doc/en/Makefile.am
prog/trunk/doc/fr/Makefile.am
prog/trunk/pikloops.kdevelop
prog/trunk/po/Makefile.am
prog/trunk/src/Makefile.am
prog/trunk/svn2cl.sh
Added: prog/trunk/CMakeLists.txt
===================================================================
--- prog/trunk/CMakeLists.txt (rev 0)
+++ prog/trunk/CMakeLists.txt 2012-10-14 23:26:14 UTC (rev 192)
@@ -0,0 +1,23 @@
+project(pikloops)
+set(VERSION "0.3.0")
+
+cmake_minimum_required(VERSION 2.4)
+if(COMMAND cmake_policy)
+ cmake_policy(SET CMP0003 NEW)
+ cmake_policy(SET CMP0011 NEW)
+endif(COMMAND cmake_policy)
+
+find_package(Qt4 REQUIRED)
+set(QT_USE_QT3SUPPORT 1)
+include(${QT_USE_FILE})
+
+find_package(KDE4 REQUIRED)
+add_definitions(${QT_DEFINITIONS} ${KDE4_DEFINITIONS})
+include_directories( ${KDE4_INCLUDES})
+
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/config.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/config.h)
+
+add_subdirectory(src)
+add_subdirectory(doc)
+
+install(FILES ChangeLog COPYING NEWS DESTINATION share/doc/pikloops)
Modified: prog/trunk/INSTALL
===================================================================
--- prog/trunk/INSTALL 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/INSTALL 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,167 +1,6 @@
-Basic Installation
-==================
+COMPILATION:
+ - "cmake ."
+ - "make"
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes a while. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Type `make install' to install the programs and any data files and
- documentation.
-
- 4. You can remove the program binaries and object files from the
- source code directory by typing `make clean'.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
- CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-
+INSTALLATION:
+ - "make install" (as root)
Deleted: prog/trunk/Makefile.am
===================================================================
--- prog/trunk/Makefile.am 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/Makefile.am 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,29 +0,0 @@
-####### kdevelop will overwrite this part!!! (begin)##########
-
-SUBDIRS = src po doc
-
-EXTRA_DIST = admin/* AUTHORS COPYING ChangeLog INSTALL NEWS README TODO pikloops.lsm pikloops.spec
-
-####### kdevelop will overwrite this part!!! (end)############
-# not a GNU package. You can remove this line, if
-# have all needed files, that a GNU package needs
-AUTOMAKE_OPTIONS = foreign
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
- @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
-
-package-messages:
- $(MAKE) -f admin/Makefile.common package-messages
- $(MAKE) -C po merge
-
-dist-hook:
- cd $(top_distdir) && perl admin/am_edit -padmin
- cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
Deleted: prog/trunk/Makefile.dist
===================================================================
--- prog/trunk/Makefile.dist 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/Makefile.dist 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,14 +0,0 @@
-all:
- @echo "This Makefile is only for the CVS repository"
- @echo "This will be deleted before making the distribution"
- @echo ""
- @if test ! -d admin; then \
- echo "Please recheckout this module!" ;\
- echo "for cvs: use checkout once and after that update again" ;\
- echo "for cvsup: checkout kde-common from cvsup and" ;\
- echo " link kde-common/admin to ./admin" ;\
- exit 1 ;\
- fi
- $(MAKE) -f admin/Makefile.common cvs
-
-.SILENT:
Modified: prog/trunk/NEWS
===================================================================
--- prog/trunk/NEWS 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/NEWS 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,3 +1,6 @@
+Version 0.3.1:
+ Ported to KDE4 (Nicolas Hadacek)
+
Version 0.3.0 :
New feature: a time unit selector
New feature: delay, frequency and time unit can be add on the command line
Deleted: prog/trunk/README
===================================================================
--- prog/trunk/README 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/README 2012-10-14 23:26:14 UTC (rev 192)
@@ -1 +0,0 @@
-
Deleted: prog/trunk/TODO
===================================================================
--- prog/trunk/TODO 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/TODO 2012-10-14 23:26:14 UTC (rev 192)
@@ -1 +0,0 @@
-
Deleted: prog/trunk/admin/Doxyfile.am
===================================================================
--- prog/trunk/admin/Doxyfile.am 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/admin/Doxyfile.am 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,102 +0,0 @@
-## generate API documentation with doxygen
-apidox-am-yes:
- @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \
- export DOXDATA=$(kde_libs_htmldir)/en/common ; \
- fi ; \
- abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
- test -d $(top_builddir)/apidocs || \
- ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --no-modulename --installdir=$(kde_libs_htmldir)/en \
- --no-recurse $(abs_top_srcdir) . ) ; \
- cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \
- $$abs_top_srcdir $(subdir)
-
-apidox-am-toplevel-yes:
- @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \
- export DOXDATA=$(kde_libs_htmldir)/en/common ; \
- fi ; \
- abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
- cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --no-modulename --installdir=$(kde_libs_htmldir)/en \
- $$abs_top_srcdir
-
-## Don't generate API documentation without doxygen
-apidox-am-no:
-
-apidox-am-toplevel-no:
-
-
-apidox:
- @if test "$(subdir)" != "."; then \
- $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
- else \
- $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
- fi
-
-
-
-install-data-local: install-apidox
-
-## install API documentation
-install-apidox:
- @if test "$(subdir)" != "."; then \
- $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
- if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
- echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- fi; \
- if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
- list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
- echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
- for file in $$list; do \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
- done; \
- fi; \
- else\
- if test -d $(top_builddir)/apidocs; then \
- $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
- list=`cd $(top_builddir)/apidocs && ls -1`; \
- echo "installing $(top_builddir)/apidocs/$$file" ;\
- echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \
- for file in $$list; do \
- if test -f $(top_builddir)/apidocs/$$file; then \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
- fi; \
- done ; fi; \
- fi
-
-uninstall-local: uninstall-apidox
-
-## uninstall API documentation
-uninstall-apidox:
- @if test "$(subdir)" != "."; then \
- if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
- rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- fi \
- else \
- if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
- rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
- fi \
- fi
-
-install-apidox-recurse: install-apidox
- @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
- list='$(SUBDIRS)'; \
- for subdir in $$list; do \
- if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \
- echo "Installing apidox from $$subdir"; \
- if test "$$subdir" != "."; then \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \
- fi ; fi ;\
- done; \
- fi
-
-
-
-.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
-
-
-# Local Variables:
-# mode: makefile
-# End:
Deleted: prog/trunk/admin/Doxyfile.global
===================================================================
--- prog/trunk/admin/Doxyfile.global 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/admin/Doxyfile.global 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,192 +0,0 @@
-OUTPUT_LANGUAGE = English
-USE_WINDOWS_ENCODING = NO
-BRIEF_MEMBER_DESC = NO
-REPEAT_BRIEF = YES
-ABBREVIATE_BRIEF =
-ALWAYS_DETAILED_SEC = YES
-INLINE_INHERITED_MEMB = NO
-FULL_PATH_NAMES = NO
-STRIP_FROM_PATH =
-SHORT_NAMES = NO
-JAVADOC_AUTOBRIEF = YES
-MULTILINE_CPP_IS_BRIEF = NO
-INHERIT_DOCS = YES
-DISTRIBUTE_GROUP_DOC = NO
-TAB_SIZE = 4
-OPTIMIZE_OUTPUT_FOR_C = NO
-OPTIMIZE_OUTPUT_JAVA = NO
-SUBGROUPING = YES
-EXTRACT_ALL = NO
-EXTRACT_PRIVATE = NO
-EXTRACT_STATIC = YES
-EXTRACT_LOCAL_CLASSES = NO
-HIDE_UNDOC_MEMBERS = NO
-HIDE_UNDOC_CLASSES = YES
-HIDE_FRIEND_COMPOUNDS = NO
-HIDE_IN_BODY_DOCS = NO
-INTERNAL_DOCS = NO
-CASE_SENSE_NAMES = YES
-HIDE_SCOPE_NAMES = NO
-SHOW_INCLUDE_FILES = YES
-INLINE_INFO = YES
-SORT_BRIEF_DOCS = NO
-SORT_BY_SCOPE_NAME = NO
-GENERATE_TESTLIST = NO
-GENERATE_BUGLIST = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS =
-MAX_INITIALIZER_LINES = 30
-SHOW_USED_FILES = YES
-QUIET = YES
-WARNINGS = NO
-WARN_IF_UNDOCUMENTED = NO
-WARN_IF_DOC_ERROR = YES
-WARN_FORMAT =
-WARN_LOGFILE =
-INPUT =
-FILE_PATTERNS = *.h \
- *.cpp \
- *.cc \
- *.hpp \
- *.dox \
- *.c++ \
- *.cxx \
- *.h++ \
- *.hh
-RECURSIVE = YES
-EXCLUDE =
-EXCLUDE_SYMLINKS = NO
-EXCLUDE_PATTERNS = *.moc.* \
- moc* \
- *.all_cpp.* \
- *unload.* \
- */test/* \
- */tests/* \
- *_p.h
-EXAMPLE_PATH =
-EXAMPLE_PATTERNS =
-EXAMPLE_RECURSIVE = NO
-IMAGE_PATH =
-INPUT_FILTER =
-FILTER_SOURCE_FILES = NO
-SOURCE_BROWSER = YES
-INLINE_SOURCES = NO
-STRIP_CODE_COMMENTS = YES
-REFERENCED_BY_RELATION = YES
-REFERENCES_RELATION = YES
-VERBATIM_HEADERS = YES
-ALPHABETICAL_INDEX = YES
-COLS_IN_ALPHA_INDEX = 3
-HTML_OUTPUT =
-HTML_FILE_EXTENSION = .html
-HTML_HEADER = ../apidocs/common/header.html
-HTML_FOOTER = ../apidocs/common/footer.html
-HTML_STYLESHEET = ../apidocs/common/doxygen.css
-HTML_ALIGN_MEMBERS = YES
-GENERATE_HTMLHELP = NO
-CHM_FILE =
-HHC_LOCATION =
-GENERATE_CHI = NO
-BINARY_TOC = NO
-TOC_EXPAND = NO
-DISABLE_INDEX = YES
-ENUM_VALUES_PER_LINE = 4
-GENERATE_TREEVIEW = NO
-TREEVIEW_WIDTH = 250
-GENERATE_LATEX = NO
-LATEX_OUTPUT =
-LATEX_CMD_NAME = latex
-MAKEINDEX_CMD_NAME = makeindex
-COMPACT_LATEX = NO
-PAPER_TYPE = a4wide
-EXTRA_PACKAGES =
-LATEX_HEADER =
-PDF_HYPERLINKS = NO
-USE_PDFLATEX = NO
-LATEX_BATCHMODE = NO
-LATEX_HIDE_INDICES = NO
-GENERATE_RTF = NO
-RTF_OUTPUT =
-COMPACT_RTF = NO
-RTF_HYPERLINKS = NO
-RTF_STYLESHEET_FILE =
-RTF_EXTENSIONS_FILE =
-GENERATE_MAN = NO
-MAN_OUTPUT =
-MAN_EXTENSION = .kde3
-MAN_LINKS = YES
-GENERATE_XML = NO
-XML_OUTPUT = xml
-XML_SCHEMA =
-XML_DTD =
-XML_PROGRAMLISTING = NO
-GENERATE_AUTOGEN_DEF = NO
-GENERATE_PERLMOD = NO
-PERLMOD_LATEX = NO
-PERLMOD_PRETTY = YES
-PERLMOD_MAKEVAR_PREFIX =
-ENABLE_PREPROCESSING = YES
-SEARCH_INCLUDES = YES
-INCLUDE_PATH =
-INCLUDE_FILE_PATTERNS =
-PREDEFINED = QT_VERSION=320 \
- __cplusplus \
- Q_WS_X11
-EXPAND_AS_DEFINED =
-SKIP_FUNCTION_MACROS = YES
-TAGFILES =
-GENERATE_TAGFILE =
-ALLEXTERNALS = NO
-EXTERNAL_GROUPS = NO
-PERL_PATH =
-CLASS_DIAGRAMS = YES
-HIDE_UNDOC_RELATIONS = NO
-HAVE_DOT = NO
-UML_LOOK = NO
-TEMPLATE_RELATIONS = YES
-INCLUDE_GRAPH = YES
-INCLUDED_BY_GRAPH = YES
-CALL_GRAPH = NO
-GRAPHICAL_HIERARCHY = YES
-DOT_IMAGE_FORMAT = png
-DOT_PATH =
-DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 800
-MAX_DOT_GRAPH_HEIGHT = 1024
-MAX_DOT_GRAPH_DEPTH = 0
-GENERATE_LEGEND = YES
-DOT_CLEANUP = YES
-SEARCHENGINE = NO
-
-### KDE Settings
-ALIASES = \
- "intern=\par<b>Internal use only.</b>" \
- "reimp=\par<b>Reimplemented from superclass.</b>" \
- "obsolete=@deprecated" \
- "feature=\xrefitem features \"Feature(s)\" \"Features\"" \
- "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \
- "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \
- "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \
- "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \
- "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \
- "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\""
-
-HTML_ALIGN_MEMBERS = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION = NO
-VERBATIM_HEADERS = NO
-GENERATE_HTML = YES
-SOURCE_BROWSER = YES
-GENERATE_AUTOGEN_DEF = NO
-DETAILS_AT_TOP = YES
-SORT_MEMBER_DOCS = YES
-GENERATE_TODOLIST = YES
-IGNORE_PREFIX = K
-GENERATE_HTML = YES
-CLASS_GRAPH = YES
-COLLABORATION_GRAPH = NO
-
-
-MACRO_EXPANSION = YES
-EXPAND_ONLY_PREDEF = YES
-
Deleted: prog/trunk/admin/Makefile.common
===================================================================
--- prog/trunk/admin/Makefile.common 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/admin/Makefile.common 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,37 +0,0 @@
-### Makefile.common
-###
-### Copyright (C) 2002 by the KDE developers
-
-### All the real work is done by the shellscript cvs.sh
-
-SHELL=/bin/sh
-
-cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
- @admindir=$(admindir); \
- if test "x$$admindir" = x; then \
- admindir=.; until test -f $$admindir/admin/cvs.sh; do \
- admindir=$$admindir/..; \
- if test `cd $$admindir && pwd` = / ; then break; fi; \
- done; \
- admindir=$$admindir/admin; \
- if test -f $$admindir/cvs.sh; then :; else \
- echo "Can't find the admin/ directory in any parent of the"; \
- echo "current directory. Please set it with admindir=..."; \
- exit 1; \
- fi; \
- fi; \
- if test "$@" = "package-merge"; then \
- MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
- $(SHELL) $$admindir/cvs.sh package-merge ;\
- else \
- MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
- fi
-
-configure.in: configure.files subdirs
-configure.files: subdirs
-
-svn: cvs
-
-.SILENT:
-
-.PHONY: svn cvs dist package-merge package-messages
Deleted: prog/trunk/admin/acinclude.m4.in
===================================================================
--- prog/trunk/admin/acinclude.m4.in 2012-10-12 18:03:19 UTC (rev 191)
+++ prog/trunk/admin/acinclude.m4.in 2012-10-14 23:26:14 UTC (rev 192)
@@ -1,5972 +0,0 @@
-## -*- autoconf -*-
-
-dnl This file is part of the KDE libraries/packages
-dnl Copyright (C) 1997 Janos Farkas (ch...@sh...)
-dnl (C) 1997,98,99 Stephan Kulow (co...@kd...)
-
-dnl This file is free software; you can redistribute it and/or
-dnl modify it under the terms of the GNU Library General Public
-dnl License as published by the Free Software Foundation; either
-dnl version 2 of the License, or (at your option) any later version.
-
-dnl This library is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-dnl Library General Public License for more details.
-
-dnl You should have received a copy of the GNU Library General Public License
-dnl along with this library; see the file COPYING.LIB. If not, write to
-dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl Boston, MA 02110-1301, USA.
-
-dnl IMPORTANT NOTE:
-dnl Please do not modify this file unless you expect your modifications to be
-dnl carried into every other module in the repository.
-dnl
-dnl Single-module modifications are best placed in configure.in for kdelibs
-dnl and kdebase or configure.in.in if present.
-
-# KDE_PATH_X_DIRECT
-dnl Internal subroutine of AC_PATH_X.
-dnl Set ac_x_includes and/or ac_x_libraries.
-AC_DEFUN([KDE_PATH_X_DIRECT],
-[
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
- # First, try using that file with no special directory specified.
-AC_TRY_CPP([#include <$x_direct_test_include>],
-[# We can compile using X headers with no special include directory.
-ac_x_includes=],
-[# Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done])
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-AC_TRY_LINK([#include <X11/Intrinsic.h>], [${x_direct_test_function}(1)],
-[LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=],
-[LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \
- /usr/X11/lib${kdelibsuff} \
- /usr/X11R6/lib${kdelibsuff} \
- /usr/X11R5/lib${kdelibsuff} \
- /usr/X11R4/lib${kdelibsuff} \
- \
- /usr/lib${kdelibsuff}/X11 \
- /usr/lib${kdelibsuff}/X11R6 \
- /usr/lib${kdelibsuff}/X11R5 \
- /usr/lib${kdelibsuff}/X11R4 \
- \
- /usr/local/X11/lib${kdelibsuff} \
- /usr/local/X11R6/lib${kdelibsuff} \
- /usr/local/X11R5/lib${kdelibsuff} \
- /usr/local/X11R4/lib${kdelibsuff} \
- \
- /usr/local/lib${kdelibsuff}/X11 \
- /usr/local/lib${kdelibsuff}/X11R6 \
- /usr/local/lib${kdelibsuff}/X11R5 \
- /usr/local/lib${kdelibsuff}/X11R4 \
- \
- /usr/X386/lib${kdelibsuff} \
- /usr/x386/lib${kdelibsuff} \
- /usr/XFree86/lib${kdelibsuff}/X11 \
- \
- /usr/lib${kdelibsuff} \
- /usr/local/lib${kdelibsuff} \
- /usr/unsupported/lib${kdelibsuff} \
- /usr/athena/lib${kdelibsuff} \
- /usr/local/x11r5/lib${kdelibsuff} \
- /usr/lpp/Xamples/lib${kdelibsuff} \
- /lib/usr/lib${kdelibsuff}/X11 \
- \
- /usr/openwin/lib${kdelibsuff} \
- /usr/openwin/share/lib${kdelibsuff} \
- ; \
-do
-dnl Don't even attempt the hair of trying to link an X program!
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done])
-fi # $ac_x_libraries = NO
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find a file (or one of more files in a list of dirs)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN([AC_FIND_FILE],
-[
-$3=NO
-for i in $2;
-do
- for j in $1;
- do
- echo "configure: __oline__: $i/$j" >&AC_FD_CC
- if test -r "$i/$j"; then
- echo "taking that" >&AC_FD_CC
- $3=$i
- break 2
- fi
- done
-done
-])
-
-dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs,
-dnl if-not-found, test-parameter, prepend-path)
-dnl
-dnl Look for program-name in list-of-dirs+$PATH.
-dnl If prepend-path is set, look in $PATH+list-of-dirs instead.
-dnl If found, $variable-name is set. If not, if-not-found is evaluated.
-dnl test-parameter: if set, the program is executed with this arg,
-dnl and only a successful exit code is required.
-AC_DEFUN([KDE_FIND_PATH],
-[
- AC_MSG_CHECKING([for $1])
- if test -n "$$2"; then
- kde_cv_path="$$2";
- else
- kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
-
- AC_CACHE_VAL(kde_cv_path_$kde_cache,
- [
- kde_cv_path="NONE"
- kde_save_IFS=$IFS
- IFS=':'
- dirs=""
- for dir in $PATH; do
- dirs="$dirs $dir"
- done
- if test -z "$6"; then dnl Append dirs in PATH (default)
- dirs="$3 $dirs"
- else dnl Prepend dirs in PATH (if 6th arg is set)
- dirs="$dirs $3"
- fi
- IFS=$kde_save_IFS
-
- for dir in $dirs; do
- if test -x "$dir/$1"; then
- if test -n "$5"
- then
- evalstr="$dir/$1 $5 2>&1 "
- if eval $evalstr; then
- kde_cv_path="$dir/$1"
- break
- fi
- else
- kde_cv_path="$dir/$1"
- break
- fi
- fi
- done
-
- eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
- ])
-
- eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
- fi
-
- if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
- AC_MSG_RESULT(not found)
- $4
- else
- AC_MSG_RESULT($kde_cv_path)
- $2=$kde_cv_path
-
- fi
-])
-
-AC_DEFUN([KDE_MOC_ERROR_MESSAGE],
-[
- AC_MSG_ERROR([No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-])
-])
-
-AC_DEFUN([KDE_UIC_ERROR_MESSAGE],
-[
- AC_MSG_WARN([No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-])
-])
-
-
-AC_DEFUN([KDE_CHECK_UIC_FLAG],
-[
- AC_MSG_CHECKING([whether uic supports -$1 ])
- kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'`
- AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache,
- [
- cat >conftest.ui <<EOT
- <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
- ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null"
- if AC_TRY_EVAL(ac_uic_testrun); then
- eval "kde_cv_prog_uic_$kde_cache=yes"
- else
- eval "kde_cv_prog_uic_$kde_cache=no"
- fi
- rm -f conftest*
- ])
-
- if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
- AC_MSG_RESULT([yes])
- :
- $3
- else
- AC_MSG_RESULT([no])
- :
- $4
- fi
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find the meta object compiler and the ui compiler in the PATH,
-dnl in $QTDIR/bin, and some more usual places
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN([AC_PATH_QT_MOC_UIC],
-[
- AC_REQUIRE([KDE_CHECK_PERL])
- qt_bindirs=""
- for dir in $kde_qt_dirs; do
- qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
- done
- qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
- if test ! "$ac_qt_bindir" = "NO"; then
- qt_bindirs="$ac_qt_bindir $qt_bindirs"
- fi
-
- KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
- if test -z "$UIC_NOT_NEEDED"; then
- KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""])
- if test -z "$UIC_PATH" ; then
- KDE_UIC_ERROR_MESSAGE
- exit 1
- else
- UIC=$UIC_PATH
-
- if test $kde_qtver = 3; then
- KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no)
- KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no)
-
- if test x$ac_uic_supports_libpath = xyes; then
- UIC="$UIC -L \$(kde_widgetdir)"
- fi
- if test x$ac_uic_supports_nounload = xyes; then
- UIC="$UIC -nounload"
- fi
- fi
- fi
- else
- UIC="echo uic not available: "
- fi
-
- AC_SUBST(MOC)
- AC_SUBST(UIC)
-
- UIC_TR="i18n"
- if test $kde_qtver = 3; then
- UIC_TR="tr2i18n"
- fi
-
- AC_SUBST(UIC_TR)
-])
-
-AC_DEFUN([KDE_1_CHECK_PATHS],
-[
- KDE_1_CHECK_PATH_HEADERS
-
- KDE_TEST_RPATH=
-
- if test -n "$USE_RPATH"; then
-
- if test -n "$kde_libraries"; then
- KDE_TEST_RPATH="-R $kde_libraries"
- fi
-
- if test -n "$qt_libraries"; then
- KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
- fi
-
- if test -n "$x_libraries"; then
- KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
- fi
-
- KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
- fi
-
-AC_MSG_CHECKING([for KDE libraries installed])
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
- AC_MSG_RESULT(yes)
-else
- AC_MSG_ERROR([your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and kdelibs as you did use now.
-For more details about this problem, look at the end of config.log.])
-fi
-
-if eval `KDEDIR= ./conftest 2>&5`; then
- kde_result=done
-else
- kde_result=problems
-fi
-
-KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-KDE_SET_PATHS($kde_result)
-
-])
-
-AC_DEFUN([KDE_SET_PATHS],
-[
- kde_cv_all_paths="kde_have_all_paths=\"yes\" \
- kde_htmldir=\"$kde_htmldir\" \
- kde_appsdir=\"$kde_appsdir\" \
- kde_icondir=\"$kde_icondir\" \
- kde_sounddir=\"$kde_sounddir\" \
- kde_datadir=\"$kde_datadir\" \
- kde_locale=\"$kde_locale\" \
- kde_cgidir=\"$kde_cgidir\" \
- kde_confdir=\"$kde_confdir\" \
- kde_kcfgdir=\"$kde_kcfgdir\" \
- kde_mimedir=\"$kde_mimedir\" \
- kde_toolbardir=\"$kde_toolbardir\" \
- kde_wallpaperdir=\"$kde_wallpaperdir\" \
- kde_templatesdir=\"$kde_templatesdir\" \
- kde_bindir=\"$kde_bindir\" \
- kde_servicesdir=\"$kde_servicesdir\" \
- kde_servicetypesdir=\"$kde_servicetypesdir\" \
- kde_moduledir=\"$kde_moduledir\" \
- kde_styledir=\"$kde_styledir\" \
- kde_widgetdir=\"$kde_widgetdir\" \
- xdg_appsdir=\"$xdg_appsdir\" \
- xdg_menudir=\"$xdg_menudir\" \
- xdg_directorydir=\"$xdg_directorydir\" \
- kde_result=$1"
-])
-
-AC_DEFUN([KDE_SET_DEFAULT_PATHS],
-[
-if test "$1" = "default"; then
-
- if test -z "$kde_htmldir"; then
- kde_htmldir='\${datadir}/doc/HTML'
- fi
- if test -z "$kde_appsdir"; then
- kde_appsdir='\${datadir}/applnk'
- fi
- if test -z "$kde_icondir"; then
- kde_icondir='\${datadir}/icons'
- fi
- if test -z "$kde_sounddir"; then
- kde_sounddir='\${datadir}/sounds'
- fi
- if test -z "$kde_datadir"; then
- kde_datadir='\${datadir}/apps'
- fi
- if test -z "$kde_locale"; then
- kde_locale='\${datadir}/locale'
- fi
- if test -z "$kde_cgidir"; then
- kde_cgidir='\${exec_prefix}/cgi-bin'
- fi
- if test -z "$kde_confdir"; then
- kde_confdir='\${datadir}/config'
- fi
- if test -z "$kde_kcfgdir"; then
- kde_kcfgdir='\${datadir}/config.kcfg'
- fi
- if test -z "$kde_mimedir"; then
- kde_mimedir='\${datadir}/mimelnk'
- fi
- if test -z "$kde_toolbardir"; then
- kde_toolbardir='\${datadir}/toolbar'
- fi
- if test -z "$kde_wallpaperdir"; then
- kde_wallpaperdir='\${datadir}/wallpapers'
- fi
- if test -z "$kde_templatesdir"; then
- kde_templatesdir='\${datadir}/templates'
- fi
- if test -z "$kde_bindir"; then
- kde_bindir='\${exec_prefix}/bin'
- fi
- if test -z "$kde_servicesdir"; then
- kde_servicesdir='\${datadir}/services'
- fi
- if test -z "$kde_servicetypesdir"; then
- kde_servicetypesdir='\${datadir}/servicetypes'
- fi
- if test -z "$kde_moduledir"; then
- if test "$kde_qtver" = "2"; then
- kde_moduledir='\${libdir}/kde2'
- else
- kde_moduledir='\${libdir}/kde3'
- fi
- fi
- if test -z "$kde_styledir"; then
- kde_styledir='\${libdir}/kde3/plugins/styles'
- fi
- if test -z "$kde_widgetdir"; then
- kde_widgetdir='\${libdir}/kde3/plugins/designer'
- fi
- if test -z "$xdg_appsdir"; then
- xdg_appsdir='\${datadir}/applications/kde'
- fi
- if test -z "$xdg_menudir"; then
- xdg_menudir='\${sysconfdir}/xdg/menus'
- fi
- if test -z "$xdg_directorydir"; then
- xdg_directorydir='\${datadir}/desktop-directories'
- fi
-
- KDE_SET_PATHS(defaults)
-
-else
-
- if test $kde_qtver = 1; then
- AC_MSG_RESULT([compiling])
- KDE_1_CHECK_PATHS
- else
- AC_MSG_ERROR([path checking not yet supported for KDE 2])
- fi
-
-fi
-])
-
-AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS],
-[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
- test -z "$kde_icondir" || test -z "$kde_sounddir" ||
- test -z "$kde_datadir" || test -z "$kde_locale" ||
- test -z "$kde_cgidir" || test -z "$kde_confdir" ||
- test -z "$kde_kcfgdir" ||
- test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
- test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
- test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
- test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
- test -z "$kde_styledir" || test -z "kde_widgetdir" ||
- test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" ||
- test "x$kde_have_all_paths" != "xyes"; then
- kde_have_all_paths=no
- fi
-])
-
-AC_DEFUN([KDE_MISSING_PROG_ERROR],
-[
- AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed KDE correctly.
-])
-])
-
-AC_DEFUN([KDE_MISSING_ARTS_ERROR],
-[
- AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed aRts correctly or use
---without-arts to compile without aRts support (this will remove functionality).
-])
-])
-
-AC_DEFUN([KDE_SET_DEFAULT_BINDIRS],
-[
- kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
- test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs"
- if test -n "$KDEDIRS"; then
- kde_save_IFS=$IFS
- IFS=:
- for dir in $KDEDIRS; do
- kde_default_bindirs="$dir/bin $kde_default_bindirs "
- done
- IFS=$kde_save_IFS
- fi
-])
-
-AC_DEFUN([KDE_SUBST_PROGRAMS],
-[
- AC_ARG_WITH(arts,
- AC_HELP_STRING([--without-arts],[build without aRts [default=no]]),
- [build_arts=$withval],
- [build_arts=yes]
- )
- AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no")
- if test "$build_arts" = "no"; then
- AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts])
- fi
-
- KDE_SET_DEFAULT_BINDIRS
- kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs"
- KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
- KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
- if test "$build_arts" '!=' "no"; then
- KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)])
- KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)])
- fi
- KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs])
-
- kde32ornewer=1
- kde33ornewer=1
- if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then
- kde32ornewer=
- kde33ornewer=
- else
- if test "$kde_qtver" = "3"; then
- if test "$kde_qtsubver" -le 1; then
- kde32ornewer=
- fi
- if test "$kde_qtsubver" -le 2; then
- kde33ornewer=
- fi
- if test "$KDECONFIG" != "compiled"; then
- if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then
- kde33ornewer=
- fi
- fi
- fi
- fi
-
- if test -n "$kde32ornewer"; then
- KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)])
- KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)])
- fi
- if test -n "$kde33ornewer"; then
- KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)])
- AC_SUBST(MAKEKDEWIDGETS)
- fi
- KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""])
-
- if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then
- kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
- test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs"
- AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
- if test "$KDE_XSL_STYLESHEET" = "NO"; then
- KDE_XSL_STYLESHEET=""
- else
- KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
- fi
- fi
-
- DCOP_DEPENDENCIES='$(DCOPIDL)'
- if test -n "$kde32ornewer"; then
- KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)'
- DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)'
- AC_SUBST(KCONFIG_COMPILER)
- AC_SUBST(KCFG_DEPENDENCIES)
- AC_SUBST(DCOPIDLNG)
- fi
- AC_SUBST(DCOPIDL)
- AC_SUBST(DCOPIDL2CPP)
- AC_SUBST(DCOP_DEPENDENCIES)
- AC_SUBST(MCOPIDL)
- AC_SUBST(ARTSCCONFIG)
- AC_SUBST(MEINPROC)
- AC_SUBST(KDE_XSL_STYLESHEET)
- AC_SUBST(XMLLINT)
-])dnl
-
-AC_DEFUN([AC_CREATE_KFSSTND],
-[
-AC_REQUIRE([AC_CHECK_RPATH])
-
-AC_MSG_CHECKING([for KDE paths])
-kde_result=""
-kde_cached_paths=yes
-AC_CACHE_VAL(kde_cv_all_paths,
-[
- KDE_SET_DEFAULT_PATHS($1)
- kde_cached_paths=no
-])
-eval "$kde_cv_all_paths"
-KDE_CHECK_PATHS_FOR_COMPLETENESS
-if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
- # wrong values were cached, may be, we can set better ones
- kde_result=
- kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
- kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir=
- kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
- kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
- kde_have_all_paths=
- kde_styledir=
- kde_widgetdir=
- xdg_appsdir = xdg_menudir= xdg_directorydir=
- KDE_SET_DEFAULT_PATHS($1)
- eval "$kde_cv_all_paths"
- KDE_CHECK_PATHS_FOR_COMPLETENESS
- kde_result="$kde_result (cache overridden)"
-fi
-if test "$kde_have_all_paths" = "no"; then
- AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-])
-else
- rm -f conftest*
- AC_MSG_RESULT($kde_result)
-fi
-
-bindir=$kde_bindir
-
-KDE_SUBST_PROGRAMS
-
-])
-
-AC_DEFUN([AC_SUBST_KFSSTND],
-[
-AC_SUBST(kde_htmldir)
-AC_SUBST(kde_appsdir)
-AC_SUBST(kde_icondir)
-AC_SUBST(kde_sounddir)
-AC_SUBST(kde_datadir)
-AC_SUBST(kde_locale)
-AC_SUBST(kde_confdir)
-AC_SUBST(kde_kcfgdir)
-AC_SUBST(kde_mimedir)
-AC_SUBST(kde_wallpaperdir)
-AC_SUBST(kde_bindir)
-dnl X Desktop Group standards
-AC_SUBST(xdg_appsdir)
-AC_SUBST(xdg_menudir)
-AC_SUBST(xdg_directorydir)
-dnl for KDE 2
-AC_SUBST(kde_templatesdir)
-AC_SUBST(kde_servicesdir)
-AC_SUBST(kde_servicetypesdir)
-AC_SUBST(kde_moduledir)
-AC_SUBST(kdeinitdir, '$(kde_moduledir)')
-AC_SUBST(kde_styledir)
-AC_SUBST(kde_widgetdir)
-if test "$kde_qtver" = 1; then
- kde_minidir="$kde_icondir/mini"
-else
-# for KDE 1 - this breaks KDE2 apps using minidir, but
-# that's the plan ;-/
- kde_minidir="/dev/null"
-fi
-dnl AC_SUBST(kde_minidir)
-dnl AC_SUBST(kde_cgidir)
-dnl AC_SUBST(kde_toolbardir)
-])
-
-AC_DEFUN([KDE_MISC_TESTS],
-[
- dnl Checks for libraries.
- AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD
- AC_SUBST(LIBUTIL)
- AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD
- AC_SUBST(LIBCOMPAT)
- kde_have_crypt=
- AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
- AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
- AC_MSG_WARN([you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support])
- kde_have_crypt=no
- ]))
- AC_SUBST(LIBCRYPT)
- if test $kde_have_crypt = yes; then
- AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
- fi
- AC_CHECK_SOCKLEN_T
- AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- AC_CHECK_LIB(dnet_stub, dnet_ntoa,
- [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
- fi
- AC_CHECK_FUNC(inet_ntoa)
- if test $ac_cv_func_inet_ntoa = no; then
- AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
- fi
- AC_CHECK_FUNC(connect)
- if test $ac_cv_func_connect = no; then
- AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
- $X_EXTRA_LIBS)
- fi
-
- AC_CHECK_FUNC(remove)
- if test $ac_cv_func_remove = no; then
- AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- AC_CHECK_FUNC(shmat, ,
- AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
-
- # more headers that need to be explicitly included on darwin
- AC_CHECK_HEADERS(sys/types.h stdint.h)
-
- # sys/bitypes.h is needed for uint32_t and friends on Tru64
- AC_CHECK_HEADERS(sys/bitypes.h)
-
- # darwin requires a poll emulation library
- AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll")
-
- # for some image handling on Mac OS X
- AC_CHECK_HEADERS(Carbon/Carbon.h)
-
- # CoreAudio framework
- AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [
- AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API])
- FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio"
- ])
-
- AC_CHECK_RES_INIT
- AC_SUBST(LIB_POLL)
- AC_SUBST(FRAMEWORK_COREAUDIO)
- LIBSOCKET="$X_EXTRA_LIBS"
- AC_SUBST(LIBSOCKET)
- AC_SUBST(X_EXTRA_LIBS)
- AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
- AC_SUBST(LIBUCB)
-
- case $host in dnl this *is* LynxOS specific
- *-*-lynxos* )
- AC_MSG_CHECKING([LynxOS header file wrappers])
- [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
- AC_MSG_RESULT(disabled)
- AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
- ;;
- esac
-
- KDE_CHECK_TYPES
- KDE_CHECK_LIBDL
- KDE_CHECK_STRLCPY
- KDE_CHECK_PIE_SUPPORT
-
-# darwin needs this to initialize the environment
-AC_CHECK_HEADERS(crt_externs.h)
-AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
-
-AH_VERBATIM(_DARWIN_ENVIRON,
-[
-#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
-# include <sys/time.h>
-# include <crt_externs.h>
-# define environ (*_NSGetEnviron())
-#endif
-])
-
-AH_VERBATIM(_AIX_STRINGS_H_BZERO,
-[
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-])
-
-AC_CHECK_FUNCS([vsnprintf snprintf])
-
-AH_VERBATIM(_TRU64,[
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Find the header files and libraries for X-Windows. Extended the
-dnl macro AC_PATH_X
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN([K_PATH_X],
-[
-AC_REQUIRE([KDE_MISC_TESTS])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_ARG_ENABLE(
- embedded,
- AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]),
- kde_use_qt_emb=$enableval,
- kde_use_qt_emb=no
-)
-
-AC_ARG_ENABLE(
- qtopia,
- AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]),
- kde_use_qt_emb_palm=$enableval,
- kde_use_qt_emb_palm=no
-)
-
-AC_ARG_ENABLE(
- mac,
- AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]),
- kde_use_qt_mac=$enableval,
- kde_use_qt_mac=no
-)
-
-# used to disable x11-specific stuff on special platforms
-AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no")
-
-if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then
-
-AC_MSG_CHECKING(for X)
-
-AC_CACHE_VAL(kde_cv_have_x,
-[# One or both of the vars are not set, and there is no cached value.
-if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
- kde_x_includes=NO
-else
- kde_x_includes=$x_includes
-fi
-if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
- kde_x_libraries=NO
-else
- kde_x_libraries=$x_libraries
-fi
-
-# below we use the standard autoconf calls
-ac_x_libraries=$kde_x_libraries
-ac_x_includes=$kde_x_includes
-
-KDE_PATH_X_DIRECT
-dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
-dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
-dnl location. The correct location is /usr/lib32 or an undefined value
-dnl (the linker is smart enough to pick the correct default library).
-dnl Things work just fine if you use just AC_PATH_X_DIRECT.
-dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to
-dnl /usr/openwin/include, which doesn't work. /usr/include does work, so
-dnl x_includes should be left alone.
-case "$host" in
-mips-sgi-irix6*)
- ;;
-*-*-solaris*)
- ;;
-*)
- _AC_PATH_X_XMKMF
- if test -z "$ac_x_includes"; then
- ac_x_includes="."
- fi
- if test -z "$ac_x_libraries"; then
- ac_x_libraries="/usr/lib${kdelibsuff}"
- fi
-esac
-#from now on we use our own again
-
-# when the user already gave --x-includes, we ignore
-# what the standard autoconf macros told us.
-if test "$kde_x_includes" = NO; then
- kde_x_includes=$ac_x_includes
-fi
-
-# for --x-libraries too
-if test "$kde_x_libraries" = NO; then
- kde_x_libraries=$ac_x_libraries
-fi
-
-if test "$kde_x_includes" = NO; then
- AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
-fi
-
-if test "$kde_x_libraries" = NO; then
- AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
-fi
-
-# Record where we found X for the cache.
-kde_cv_have_x="have_x=yes \
- kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
-])dnl
-
-eval "$kde_cv_have_x"
-
-if test "$have_x" != yes; then
- AC_MSG_RESULT($have_x)
- no_x=yes
-else
- AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
-fi
-
-if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
- X_INCLUDES=""
- x_includes="."; dnl better than nothing :-
- else
- x_includes=$kde_x_includes
- X_INCLUDES="-I$x_includes"
-fi
-
-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then
- X_LDFLAGS=""
- x_libraries="/usr/lib"; dnl better than nothing :-
- else
- x_libraries=$kde_x_libraries
- X_LDFLAGS="-L$x_libraries"
-fi
-all_includes="$X_INCLUDES"
-all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS"
-
-# Check for libraries that X11R6 Xt/Xaw programs need.
-ac_save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-# check for ICE first), but we must link in the order -lSM -lICE or
-# we get undefined symbols. So assume we have SM if we have ICE.
-# These have to be linked with before -lX11, unlike the other
-# libraries we check for below, so use a different variable.
-# --i...@ul..., kb...@cs....
-AC_CHECK_LIB(ICE, IceConnectionNumber,
- [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
-LDFLAGS="$ac_save_LDFLAGS"
-
-LIB_X11='-lX11 $(LIBSOCKET)'
-
-AC_MSG_CHECKING(for libXext)
-AC_CACHE_VAL(kde_cv_have_libXext,
-[
-kde_ldflags_safe="$LDFLAGS"
-kde_libs_safe="$LIBS"
-
-LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
-LIBS="-lXext -lX11 $LIBSOCKET"
-
-AC_TRY_LINK([
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-],
-[
-printf("hello Xext\n");
-],
-kde_cv_have_libXext=yes,
-kde_cv_have_libXext=no
-)
-
-LDFLAGS=$kde_ldflags_safe
-LIBS=$kde_libs_safe
-])
-
-AC_MSG_RESULT($kde_cv_have_libXext)
-
-if test "$kde_cv_have_libXext" = "no"; then
- AC_MSG_ERROR([We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either.])
-fi
-
-LIB_XEXT="-lXext"
-QTE_NORTTI=""
-
-elif test "$kde_use_qt_emb" = "yes"; then
- dnl We're using QT Embedded
- CPPFLAGS=-DQWS
- CXXFLAGS="$CXXFLAGS -fno-rtti"
- QTE_NORTTI="-fno-rtti -DQWS"
- X_PRE_LIBS=""
- LIB_X11=""
- LIB_XEXT=""
- LIB_XRENDER=""
- LIBSM=""
- X_INCLUDES=""
- X_LDFLAGS=""
- x_includes=""
- x_libraries=""
-elif test "$kde_use_qt_mac" = "yes"; then
- dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to
- dnl be included to get the information) --Sam
- CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp"
- CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp"
- X_PRE_LIBS=""
- LIB_X11=""
- LIB_XEXT=""
- LIB_XRENDER=""
- LIBSM=""
- X_INCLUDES=""
- X_LDFLAGS=""
- x_includes=""
- x_libraries=""
-fi
-AC_SUBST(X_PRE_LIBS)
-AC_SUBST(LIB_X11)
-AC_SUBST(LIB_XRENDER)
-AC_SUBST(LIBSM)
-AC_SUBST(X_INCLUDES)
-AC_SUBST(X_LDFLAGS)
-AC_SUBST(x_includes)
-AC_SUBST(x_libraries)
-AC_SUBST(QTE_NORTTI)
-AC_SUBST(LIB_XEXT)
-
-])
-
-AC_DEFUN([KDE_PRINT_QT_PROGRAM],
-[
-AC_REQUIRE([KDE_USE_QT])
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <qglobal.h>
-#include <qapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <qevent.h>
-#include <qstring.h>
-#include <qstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if QT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <qcursor.h>
-#include <qstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
- QStringList *t = new QStringList();
- Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
- QString s;
- s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
- (void)QStyleFactory::create(QString::null);
- QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
- return 0;
-}
-EOF
-])
-
-AC_DEFUN([KDE_USE_QT],
-[
-if test -z "$1"; then
- # Current default Qt version: 3.3
- kde_qtver=3
- kde_qtsubver=3
-else
- kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
- # following is the check if subversion isnt found in passed argument
- if test "$kde_qtsubver" = "$1"; then
- kde_qtsubver=1
- fi
- kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
- if test "$kde_qtver" = "1"; then
- kde_qtsubver=42
- fi
-fi
-
-if test -z "$2"; then
- if test "$kde_qtver" = "2"; then
- if test $kde_qtsubver -gt 0; then
- kde_qt_minversion=">= Qt 2.2.2"
- else
- kde_qt_minversion=">= Qt 2.0.2"
- fi
- fi
- if test "$kde_qtver" = "3"; then
- if test $kde_qtsubver -gt 0; then
- if test $kde_qtsubver -gt 1; then
- if test $kde_qtsubver -gt 2; then
- kde_qt_minversion=">= Qt 3.3 and < 4.0"
- ...
[truncated message content] |
