Displayed values of power fan x1000 too big

Help
fan42
2011-06-15
2012-12-12
  • fan42

    fan42 - 2011-06-15

    Hi there,

    I work with phpSysInfo Version 3.0.11 on Fedora 14. The value of the power fan displayed seems x1000 too high. The  specifications of the power unit state a max speed of 1350 rpm for the power fan.

    The output of "sensors" shows all other values in a reasonable range:

    $ sensors
    atk0110-acpi-0
    Adapter: ACPI interface
    Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V)
    +3.3 Voltage: +3.38 V (min = +2.97 V, max = +3.63 V)
    +5 Voltage: +4.86 V (min = +4.50 V, max = +5.50 V)
    +12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
    CPU FAN Speed: 2490 RPM (min = 600 RPM)
    CHASSIS FAN Speed: 0 RPM (min = 600 RPM)
    POWER FAN Speed: 135000 RPM (min = 600 RPM)
    CPU Temperature: +48.0 C (high = +60.0 C, crit = +95.0 C)
    MB Temperature: +44.0 C (high = +45.0 C, crit = +75.0 C)

    k10temp-pci-00c3
    Adapter: PCI adapter
    temp1: +38.0 C (high = +70.0 C)
    (crit = +99.5 C, hyst = +97.5 C)

    Does anyone have a hint on how to receive and display the correct values for the power fan speed?

    Regards,
    fan42

     
  • Mieczysław Nalewaj

    Specify the contents of the file /etc/sensors.conf

     
  • fan42

    fan42 - 2011-06-17

    Hi namiltd,
    Below you will find the contents of /etc/sensors3.conf. There is no "sensors.conf" in my /etc/.
    Hope this helps.
    Thanks in advance,
    fan42

    # libsensors configuration file
    # -------------------
    #
    # This default configuration file only includes statements which do not
    # differ from one mainboard to the next. Only label, compute and set
    # statements for internal voltage and temperature sensors are included.
    #
    # In general, local changes should not be added to this file, but rather
    # placed in custom configuration files located in /etc/sensors.d. This
    # approach makes further updates much easier.
    #
    # Such custom configuration files for specific mainboards can be found at
    # http://www.lm-sensors.org/wiki/Configurations

    chip "lm78-*" "lm79-*" "lm80-*"

        label temp1 "M/B Temp"

    chip "w83792d-*"

        label in0 "VcoreA"
        label in1 "VcoreB"
        label in6 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"

        set in6_min  5.0 * 0.90
        set in6_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.0 * 1.10

    chip "w83793-*"

        label in0 "VcoreA"
        label in1 "VcoreB"
        label in7 "+5V"
        label in8 "5VSB"
        label in9 "Vbat"

        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  5.0 * 0.90
        set in8_max  5.0 * 1.10
        set in9_min  3.0 * 0.90
        set in9_max  3.0 * 1.10

    chip "w83795g-*" "w83795adg-*"

        label in12 "+3.3V"
        label in13 "3VSB"
        label in14 "Vbat"

        set in12_min  3.3 * 0.90
        set in12_max  3.3 * 1.10
        set in13_min  3.3 * 0.90
        set in13_max  3.3 * 1.10
        set in14_min  3.0 * 0.90
        set in14_max  3.3 * 1.10

    chip "via686a-*"

        label in0 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10

    chip "adm1025-*" "ne1619-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "VCC"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
    # Depending on how your chip is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10

        label temp1 "CPU Temp"
        label temp2 "M/B Temp"

    chip "lm87-*" "adm1024-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10

        label temp1 "M/B Temp"
        label temp2 "CPU Temp"

    chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"

        label in8 "Vbat"

    chip "fscpos-*" "fscher-*"
    #FSC "Hermes"

        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"

        label temp1 "CPU Temp"
        label temp2 "M/B Temp"
        label temp3 "Aux Temp"

    chip "fscscy-*"
    #FSC "Scylla"

        label in0 "+12V"
        label in1 "+5V"
        label in2 "+3.3V"

        label temp1 "CPU0 Temp"
        label temp2 "CPU1 Temp"
        label temp3 "M/B Temp"
        label temp4 "Aux Temp"

    chip "fschds-*"
    # Fujitsu Technology Solutions, "Hades"-Chip

    # Temperatures
        label temp1 "CPU Temp"
        label temp2 "Super I/O Temp"
        label temp3 "System Temp"

    # Fans
        label fan1 "PSU Fan"
        label fan2 "CPU Fan"
        label fan3 "System FAN2"
        label fan4 "System FAN3"
        label fan5 "System FAN4"

    # Voltages
        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"

    chip "fscsyl-*"
    # Fujitsu Technology Solutions, "Syleus"-Chip

    # Temperatures
        label temp1 "CPU Temp"
        label temp4 "Super I/O Temp"
        label temp5 "Northbridge Temp"

    # Fans
        label fan1 "CPU Fan"
        label fan2 "System FAN2"
        label fan3 "System FAN3"
        label fan4 "System FAN4"
        label fan7 "PSU Fan"

    # Voltages
        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"
        label in3 "+3.3V"
        label in5 "+3.3V-Aux"

    chip "vt1211-*"

        label in5 "+3.3V"

        label temp2 "SIO Temp"

    chip "vt8231-*"

        label in5 "+3.3V"

    chip "smsc47m192-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "VCC"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10

        label temp1 "SIO Temp"

    chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" "emc6d100-*" "emc6d102-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
    # Depending on how your chip is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10

        label temp2 "M/B Temp"

    chip "pc87365-*" "pc87366-*"

    # Voltage inputs

        label in7 "3VSB"
        label in8 "VDD"
        label in9 "Vbat"
        label in10 "AVDD"

        compute in7   @*2, @/2
        compute in8   @*2, @/2
        compute in10  @*2, @/2

    # These are the operating conditions as recommended by National
    # Semiconductor
        set in7_min   3.0
        set in7_max   3.6
        set in8_min   3.0
        set in8_max   3.6
        set in10_min  3.0
        set in10_max  3.6
    # Depending on the hardware setup, the battery voltage may or may not
    # be monitored.
    #    set in9_min   2.4
    #    set in9_max   3.6

        label temp3 "SIO Temp"

        set temp3_min    0
        set temp3_max   70
        set temp3_crit  85

    chip "adm1030-*" "adm1031-*"

        label temp1 "M/B Temp"

    chip "w83627thf-*"

        label in3 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"

        # Internal resistors
        compute in3  @ * (1 + 34/51), @ / (1 + 34/51)
        compute in7  @ * (1 + 34/51), @ / (1 + 34/51)

        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
    # The battery voltage may or may not be monitored.
    #    set in8_min  3.0 * 0.90
    #    set in8_max  3.0 * 1.10

    chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"

        label in0 "Vcore"
        label in2 "AVCC"
        label in3 "+3.3V"
        label in7 "3VSB"
        label in8 "Vbat"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  3.3 * 0.90
        set in3_max  3.3 * 1.10
        set in7_min  3.3 * 0.90
        set in7_max  3.3 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.0 * 1.10

    chip "w83627uhg-*"

        label in2 "AVCC"
        label in3 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"

        set in2_min  5.0 * 0.90
        set in2_max  5.0 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.0 * 1.10

    chip "f71805f-*"

        label in0 "+3.3V"

        set in0_min  3.3 * 0.90
        set in0_max  3.3 * 1.10

    chip "f71872f-*"

        label in0 "+3.3V"
        label in9 "Vbat"
        label in10 "3VSB"

        set in0_min   3.3 * 0.90
        set in0_max   3.3 * 1.10
        set in9_min   3.0 * 0.90
        set in9_max   3.0 * 1.10
        set in10_min  3.3 * 0.90
        set in10_max  3.3 * 1.10

    chip "k8temp-*"

        label temp1 "Core0 Temp"
        label temp2 "Core0 Temp"
        label temp3 "Core1 Temp"
        label temp4 "Core1 Temp"

    chip "dme1737-*"

        label in0 "5VSB"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "3VSB"
        label in6 "Vbat"

        label temp2 "SIO Temp"

        set in0_min  5.0 * 0.90
        set in0_max  5.0 * 1.10
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10

    chip "sch311x-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "3VSB"
        label in6 "Vbat"

        label temp2 "SIO Temp"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10

    chip "sch5027-*"

        label in0 "5VSB"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"

        label temp2 "SIO Temp"

        set in0_min  5.0 * 0.90
        set in0_max  5.0 * 1.10
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10

    chip "sch5127-*"

        label in2 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10

    chip "f71808e-*" "f71862fg-*" "f71869-*" "f71882fg-*" \
         "f71889fg-*" "f71889ed-*" "f71889a-*"

        label in0 "+3.3V"
        label in7 "3VSB"
        label in8 "Vbat"

        compute in0  @*2, @/2
        compute in7  @*2, @/2
        compute in8  @*2, @/2

    chip "f71858fg-*" "f8000-*"

        label in0 "+3.3V"
        label in1 "3VSB"
        label in2 "Vbat"

        compute in0  @*2, @/2
        compute in1  @*2, @/2
        compute in2  @*2, @/2

    chip "f81865f-*"

        label in0 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"

        compute in0  @*2, @/2
        compute in5  @*2, @/2
        compute in6  @*2, @/2

    chip "adt7473-*" "adt7475-*"

        label in2 "+3.3V"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10

        label temp2 "Board Temp"

    chip "adt7476-*" "adt7490-*"

        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"

        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
    # Depending on how your ADT7476 is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10

        label temp2 "M/B Temp"

     
  • Mieczysław Nalewaj

    Please can we have also the output of the following command as  root

    dmidecode

     
  • fan42

    fan42 - 2011-06-20

    Hi namiltd ,

    sorry for being late with my reply.
    Yes, of course, below you will find  the output of dmidecode as root.
    I hope this helps.

    Thanks in advance,
    amahivirtual

    # dmidecode 2.11
    SMBIOS 2.5 present.
    63 structures occupying 2306 bytes.
    Table at 0x0009F400.

    Handle 0x0000, DMI type 0, 24 bytes
    BIOS Information
    Vendor: American Megatrends Inc.
    Version: 0802  
    Release Date: 08/24/2010
    Address: 0xF0000
    Runtime Size: 64 kB
    ROM Size: 1024 kB
    Characteristics:
    ISA is supported
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    LS-120 boot is supported
    ATAPI Zip drive boot is supported
    BIOS boot specification is supported
    Targeted content distribution is supported
    BIOS Revision: 8.15

    Handle 0x0001, DMI type 1, 27 bytes
    System Information
    Manufacturer: System manufacturer
    Product Name: System Product Name
    Version: System Version
    Serial Number: System Serial Number
    UUID: E0ECEC2E-1110-E011-B590-BCAEC539400A
    Wake-up Type: Power Switch
    SKU Number: To Be Filled By O.E.M.
    Family: To Be Filled By O.E.M.

    Handle 0x0002, DMI type 2, 15 bytes
    Base Board Information
    Manufacturer: ASUSTeK Computer INC.
    Product Name: M4A78LT-M
    Version: Rev X.0x
    Serial Number: 108215750000498
    Asset Tag: To Be Filled By O.E.M.
    Features:
    Board is a hosting board
    Board is replaceable
    Location In Chassis: To Be Filled By O.E.M.
    Chassis Handle: 0x0003
    Type: Motherboard
    Contained Object Handles: 0

    Handle 0x0003, DMI type 3, 21 bytes
    Chassis Information
    Manufacturer: Chassis Manufacture
    Type: Desktop
    Lock: Not Present
    Version: Chassis Version
    Serial Number: Chassis Serial Number
    Asset Tag: Asset-1234567890
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    OEM Information: 0x00000001
    Height: Unspecified
    Number Of Power Cords: 1
    Contained Elements: 0

    Handle 0x0004, DMI type 4, 40 bytes
    Processor Information
    Socket Designation: AM3
    Type: Central Processor
    Family: Athlon II
    Manufacturer: AMD             
    ID: 63 0F 10 00 FF FB 8B 17
    Signature: Family 16, Model 6, Stepping 3
    Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    CLFSH (CLFLUSH instruction supported)
    MMX (MMX technology supported)
    FXSR (FXSAVE and FXSTOR instructions supported)
    SSE (Streaming SIMD extensions)
    SSE2 (Streaming SIMD extensions 2)
    HTT (Multi-threading)
    Version: AMD Athlon™ II X2 250e Processor                
    Voltage: 1.5 V
    External Clock: 200 MHz
    Max Speed: 3000 MHz
    Current Speed: 3000 MHz
    Status: Populated, Enabled
    Upgrade: Other
    L1 Cache Handle: 0x0005
    L2 Cache Handle: 0x0006
    L3 Cache Handle: 0x0007
    Serial Number: To Be Filled By O.E.M.
    Asset Tag: To Be Filled By O.E.M.
    Part Number: To Be Filled By O.E.M.
    Core Count: 2
    Core Enabled: 2
    Characteristics:
    64-bit capable

    Handle 0x0005, DMI type 7, 19 bytes
    Cache Information
    Socket Designation: L1-Cache
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Varies With Memory Address
    Location: Internal
    Installed Size: 256 kB
    Maximum Size: 256 kB
    Supported SRAM Types:
    Pipeline Burst
    Installed SRAM Type: Pipeline Burst
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Data
    Associativity: 4-way Set-associative

    Handle 0x0006, DMI type 7, 19 bytes
    Cache Information
    Socket Designation: L2-Cache
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Varies With Memory Address
    Location: Internal
    Installed Size: 2048 kB
    Maximum Size: 2048 kB
    Supported SRAM Types:
    Pipeline Burst
    Installed SRAM Type: Pipeline Burst
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: 4-way Set-associative

    Handle 0x0007, DMI type 7, 19 bytes
    Cache Information
    Socket Designation: L3-Cache
    Configuration: Disabled, Not Socketed, Level 3
    Operational Mode: Unknown
    Location: Internal
    Installed Size: 0 kB
    Maximum Size: 0 kB
    Supported SRAM Types:
    Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Unknown
    System Type: Unknown
    Associativity: Unknown

    Handle 0x0008, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: PS/2 Keyboard/Mouse
    Internal Connector Type: None
    External Reference Designator: PS/2 Keyboard/Mouse
    External Connector Type: PS/2
    Port Type: Other

    Handle 0x0009, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB12
    Internal Connector Type: None
    External Reference Designator: USB12
    External Connector Type: Access Bus (USB)
    Port Type: USB

    Handle 0x000A, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB34
    Internal Connector Type: None
    External Reference Designator: USB34
    External Connector Type: Access Bus (USB)
    Port Type: USB

    Handle 0x000B, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB56
    Internal Connector Type: None
    External Reference Designator: USB56
    External Connector Type: Access Bus (USB)
    Port Type: USB

    Handle 0x000C, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: LAN
    Internal Connector Type: None
    External Reference Designator: LAN
    External Connector Type: RJ-45
    Port Type: Network Port

    Handle 0x000D, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Line_In
    Internal Connector Type: None
    External Reference Designator: Audio_Line_In
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x000E, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Line_Out
    Internal Connector Type: None
    External Reference Designator: Audio_Line_Out
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x000F, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Mic_In
    Internal Connector Type: None
    External Reference Designator: Audio_Mic_In
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0010, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Center/Sub
    Internal Connector Type: None
    External Reference Designator: Audio_Center/Sub
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0011, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Rear
    Internal Connector Type: None
    External Reference Designator: Audio_Rear
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0012, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: Audio_Side
    Internal Connector Type: None
    External Reference Designator: Audio_Side
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0013, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: HDMI
    Internal Connector Type: None
    External Reference Designator: HDMI port
    External Connector Type: Other
    Port Type: Other

    Handle 0x0014, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: VGA
    Internal Connector Type: None
    External Reference Designator: D_SUB
    External Connector Type: DB-15 female
    Port Type: Video Port

    Handle 0x0015, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: DVI
    Internal Connector Type: None
    External Reference Designator: DVI port
    External Connector Type: Other
    Port Type: Other

    Handle 0x0016, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SPDIFO
    Internal Connector Type: None
    External Reference Designator: SPDIF_OUT
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0017, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: PRI IDE
    Internal Connector Type: On Board IDE
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0018, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA1
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0019, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA2
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001A, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA3
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001B, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA4
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001C, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA5
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001D, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SB_SATA6
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001E, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: CPU FAN
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001F, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: CHA FAN
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0020, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB78
    Internal Connector Type: Access Bus (USB)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: USB

    Handle 0x0021, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB910
    Internal Connector Type: Access Bus (USB)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: USB

    Handle 0x0022, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB1112
    Internal Connector Type: Access Bus (USB)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: USB

    Handle 0x0023, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: PANEL
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0024, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SPDIF OUT
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0025, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: AAFP
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0026, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: COM1
    Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0027, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: LPT
    Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0028, DMI type 9, 13 bytes
    System Slot Information
    Designation: PCIE1X
    Type: 32-bit PCI Express
    Current Usage: Available
    Length: Short
    ID: 9
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x0029, DMI type 9, 13 bytes
    System Slot Information
    Designation: PCIE16X
    Type: 32-bit PCI Express
    Current Usage: Available
    Length: Short
    ID: 2
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x002A, DMI type 9, 13 bytes
    System Slot Information
    Designation: PCI1
    Type: 32-bit PCI
    Current Usage: Available
    Length: Short
    ID: 12
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x002B, DMI type 9, 13 bytes
    System Slot Information
    Designation: PCI2
    Type: 32-bit PCI
    Current Usage: Available
    Length: Short
    ID: 13
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x002C, DMI type 10, 6 bytes
    On Board Device Information
    Type: Other
    Status: Enabled
    Description:   To Be Filled By O.E.M.

    Handle 0x002D, DMI type 10, 6 bytes
    On Board Device Information
    Type: Ethernet
    Status: Enabled
    Description: To Be Filled By O.E.M.

    Handle 0x002E, DMI type 10, 6 bytes
    On Board Device Information
    Type: Sound
    Status: Enabled
    Description: To Be Filled By O.E.M.

    Handle 0x002F, DMI type 10, 6 bytes
    On Board Device Information
    Type: Other
    Status: Enabled
    Description: To Be Filled By O.E.M.

    Handle 0x0030, DMI type 11, 5 bytes
    OEM Strings
    String 1: BCAEC539400A
    String 2: To Be Filled By O.E.M.
    String 3: To Be Filled By O.E.M.
    String 4: To Be Filled By O.E.M.

    Handle 0x0031, DMI type 13, 22 bytes
    BIOS Language Information
    Language Description Format: Abbreviated
    Installable Languages: 1
    en|US|iso8859-1
    Currently Installed Language: en|US|iso8859-1

    Handle 0x0032, DMI type 15, 35 bytes
    System Event Log
    Area Length: 4 bytes
    Header Start Offset: 0x0000
    Header Length: 2 bytes
    Data Start Offset: 0x0002
    Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
    Access Address: Index 0x046A, Data 0x046C
    Status: Invalid, Not Full
    Change Token: 0x00000000
    Header Format: No Header
    Supported Log Type Descriptors: 6
    Descriptor 1: End of log
    Data Format 1: OEM-specific
    Descriptor 2: End of log
    Data Format 2: OEM-specific
    Descriptor 3: End of log
    Data Format 3: OEM-specific
    Descriptor 4: End of log
    Data Format 4: OEM-specific
    Descriptor 5: End of log
    Data Format 5: OEM-specific
    Descriptor 6: End of log
    Data Format 6: OEM-specific

    Handle 0x0033, DMI type 16, 15 bytes
    Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: Single-bit ECC
    Maximum Capacity: 16 GB
    Error Information Handle: Not Provided
    Number Of Devices: 4

    Handle 0x0034, DMI type 19, 15 bytes
    Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0007FFFFFFF
    Range Size: 2 GB
    Physical Array Handle: 0x0033
    Partition Width: 1

    Handle 0x0035, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0033
    Error Information Handle: Not Provided
    Total Width: Unknown
    Data Width: Unknown
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM0
    Bank Locator: BANK0
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: Manufacturer0
    Serial Number: SerNum0
    Asset Tag: AssetTagNum0
    Part Number: PartNum0

    Handle 0x0036, DMI type 126, 19 bytes
    Inactive

    Handle 0x0037, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0033
    Error Information Handle: Not Provided
    Total Width: Unknown
    Data Width: Unknown
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM1
    Bank Locator: BANK1
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: Manufacturer1
    Serial Number: SerNum1
    Asset Tag: AssetTagNum1
    Part Number: PartNum1

    Handle 0x0038, DMI type 126, 19 bytes
    Inactive

    Handle 0x0039, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0033
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: 2048 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM2
    Bank Locator: BANK2
    Type: Other
    Type Detail: Synchronous
    Speed: 1333 MHz
    Manufacturer: Manufacturer2
    Serial Number: SerNum2
    Asset Tag: AssetTagNum2
    Part Number: PartNum2

    Handle 0x003A, DMI type 20, 19 bytes
    Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0007FFFFFFF
    Range Size: 2 GB
    Physical Device Handle: 0x0039
    Memory Array Mapped Address Handle: 0x0034
    Partition Row Position: 1

    Handle 0x003B, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0033
    Error Information Handle: Not Provided
    Total Width: Unknown
    Data Width: Unknown
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM3
    Bank Locator: BANK3
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: Manufacturer3
    Serial Number: SerNum3
    Asset Tag: AssetTagNum3
    Part Number: PartNum3

    Handle 0x003C, DMI type 126, 19 bytes
    Inactive

    Handle 0x003D, DMI type 32, 20 bytes
    System Boot Information
    Status: No errors detected

    Handle 0x003E, DMI type 127, 4 bytes
    End Of Table

     
  • Mieczysław Nalewaj

    Add lines to your etc/sensors3.conf:
    chip "atk0110-*"
    label fan3 "Power Fan"
    set fan3_div 100
    set fan3_min 600

    Do not take effect until you run 'sensors -s' as root

     
  • fan42

    fan42 - 2011-06-22

    Dear namiltd,

    thanks for the suggestion :-)
    I added the lines at the end of etc/sensors3.conf.
    As root, I run "sensors -s" but I received these errors in the terminal:

    # sensors -s
    Error: File /etc/sensors3.conf, line 515: Unknown feature name
    Error: File /etc/sensors3.conf, line 516: Failed to set value
    atk0110-acpi-0: At least one "set" statement failed
    #

    What could I do else?

    Regards,
    amahivirtual

     
  • Mieczysław Nalewaj

    Try another fan number.

     
  • fan42

    fan42 - 2011-06-25

    Dear namiltd.
    tahnks for the hint with  changing the fan number. I tried 1, 2 and 4 but the errors remain.
    Regards,
    fan42

     

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks