Re: [Phpipam-development] Bug/issues in 1.15.001 regarding assignment of vlans to subnet + masking
phpipam open-source IP address management
Brought to you by:
myha
Menu
▾
▴
Re: [Phpipam-development] Bug/issues in 1.15.001 regarding assignment of vlans to subnet + masking of password
|
From: Miha P. <mih...@gm...> - 2015-04-20 16:04:07
|
Hi,
* mail - fixed, was only applied to plain text mail
* mail space - fixed
* used column in favourites - fixed
* favourites - should be displayed under tools ? I have 2 installations and both show them? I added them to widget also.
* users/pass : fixed, makes sense.
brm
> On 19 Apr 2015, at 17:36, Jonas Hauge Jensen <jh...@na...> wrote:
>
> Hi Miha,
>
> Fast responses - nice and thanks! :)
>
> I can verify that everything except Mail IP is fixed.
>
> When approving a request I still receive the wrong IP in the body of the email:
>
> ----snip start----
> Subject: IP address request172.16.10.4 accepted
>
> IP address request172.16.10.4 accepted
> * Subnet 172.16.10.0/24
> * assigned IP address 0.0.0.172
> * Description test
> * Hostname test * Owner
> ---snip end----
>
> A cosmetic note - there is a missing white space in both subject and body :-)
>
> Regarding discovery: my installation is run on Debian wheezy (7.8). I will look a bit further into this tomorrow and let you know the outcome.
> If I should run some specific test scenarios, please let me know.
>
> Makes good sense to optimize load times and only apply the "quick add" on the favorites subnet. Sadly I only see the "remove from favorites" button in the widget and/or /?page=tools§ion=favourites.
> Another cosmetic note regarding favorites: The "Used" column currently shows the percentage of available IPs but it's more logical to show the used percentage.
>
> New small bug I have found - username and password length for local users.
> Usernames on minimum 8 charaters is a bit long. I don't know if this on purpose but I would suggest to lower it to either 4 or 6.
> The password length requirement and error does not match (6 required, errors says 8)
>
> I would suggest the following diff:
>
> /app/admin/users$ diff edit-result.php.old edit-result.php
> 36c36
> < if(strlen($_POST['password1'])<6) { $Result->show("danger", _("Password must be at least 8 characters long!"), true); }
> ---
>> if(strlen($_POST['password1'])<8) { $Result->show("danger", _("Password must be at least 8 characters long!"), true); }
> 50c50
> < if(strlen($_POST['username'])<8) { $Result->show("danger", _("Username must be at least 8 characters long!"), true); }
> ---
>> if(strlen($_POST['username'])<6) { $Result->show("danger", _("Username must be at least 6 characters long!"), true); }
>
> Keep up the good work! :)
>
> /Jonas
>
> -----Oprindelig meddelelse-----
> Fra: Miha Petkovsek [mailto:mih...@gm...]
> Sendt: 17. april 2015 22:12
> Til: Jonas Hauge Jensen
> Cc: php...@li...
> Emne: Re: [Phpipam-development] Bug/issues in 1.15.001 regarding assignment of vlans to subnet + masking of password
>
> Hi Jonas,
>
> Fixed:
> * Mail IP
> * IP request loading
> * Tag default Used
> * Gateway tag
>
> Todo:
> * Discovery > Will check. Which OS are you using?
>
> Partially implemented:
> * button for adding new IP address > before I permit adding new IP address I would have to check usage for each subnet without slaves, meaning fetching addresses for each subnet etc which would cause quite more time to load page. I have added button to favourite subnets.
>
> VLAN move is already implemented - clicking on button under vlan administration.
>
>
> Will look at other two emails tomorrow.
>
> brm
>
>> On 17 Apr 2015, at 10:57, Jonas Hauge Jensen <jh...@na...> wrote:
>>
>> Hi Miha,
>>
>> Thanks! I can verify that is works as expected :-)
>>
>> A couple of others things I have found or thought about:
>>
>> * Mails regarding approved IP requests includes faulty data:
>>
>> Accept an request for 172.16.10.0/24 and assigns next available
>> (172.16.10.3) but assigned address is always shown as "0.0.0.172".
>> Example output from email below:
>>
>> ----start----
>> IP address request172.16.10.3 accepted
>> . Subnet 172.16.10.0/24
>> . assigned IP address 0.0.0.172
>> . Description test
>> . Hostname test
>> . Owner
>> . Requested from XXX
>>
>> . Comment (request)
>> . Admin accept/reject comment
>> Sent by user Jonas Hauge Jensen at 2015/04/17 10:03
>> ----end------
>>
>> * IP request from login site keeps showing the "loading progress circle"
>> when changing subnet for a request. The actual request is done in the
>> right subnet.
>>
>> * Disovery script ends up adding ALL IP addresses as online even they
>> aren't. When pingcheck comes by the discovered IPs goes into warning
>> and then offline status.
>> This gave almost 10000 new IP address entries in the database :-)
>>
>> I have tried pinging the IPs in question and they do not answer on
>> ping. I tried removing all new entries from the DB and they were
>> re-added during next discovery which leads me to think it's another bug in the array-code.
>>
>> * Not an actual bug but proposed changes to default behaviour:
>> ** When adding a new address the default tag is "offline" - I would
>> suggest it to be "Used" as this will be the case for most additions.
>> Otherwise make it possible to reprioritize the order just like you can
>> reorder the sections today.
>> ** Change the "Is gateway" field to check box instead of the dropdown.
>> Just like the "Ping exclude".
>>
>> * Feature request #1:
>> **Add a button just before the "edit subnet" button on the
>> /?page=subnets§ion=1 which should open the "Add IP address"
>> dialogue for the subnet and prefill it with the next available IP.
>> This should make it quick to just add an extra IP. This button should
>> also be shown under the list of favorite subnets.
>>
>> * Feature request #2:
>> Make it possible to migrate vlans from one L2-domain to another. This
>> is especially needed for people who already have vlans in the system.
>> Currently you will have to move these to other L2-domain via direct
>> row updates in the database.
>>
>> --
>> Best regards
>>
>> Jonas Hauge Jensen
>>
>> -----Oprindelig meddelelse-----
>> Fra: Miha Petkovsek [mailto:mih...@gm...]
>> Sendt: 16. april 2015 18:40
>> Til: Jonas Hauge Jensen
>> Cc: php...@li...
>> Emne: Re: [Phpipam-development] Bug/issues in 1.15.001 regarding
>> assignment of vlans to subnet + masking of password
>>
>> Hi, thanks for noticing / reporting.
>>
>> * l2 domains should be printed out but there was a small bug, it is
>> fixed now.
>> * Passwords are also masked, forgot to do it :/
>>
>> pushed to svn.
>>
>> If you find anything else let me know!
>>
>> br, Miha
>>
>>> On 16 Apr 2015, at 10:25, Jonas Hauge Jensen <jh...@na...>
>> wrote:
>>>
>>> Hi,
>>>
>>> First of all - thank you for a great product!
>>>
>>> We have just upgraded to the latest development release (R521) and
>>> have found a couple of bugs/issues:
>>>
>>> Vlan assignment on subnets
>>> ---------------------------------------
>>>
>>> When you define which vlan a subnet belongs to there are multiple
>>> instances of "+ Add new VLAN" listed. One for each defined L2-domain.
>>> You are not able to see which L2-domain before actually selecting it
>>> and if you select the wrong one and hit cancel, you end up cancelling
>>> the
>> whole "edit subnet"
>>> dialogue instead only the "create vlan dialogue".
>>>
>>> I would suggest that the "+ add new VLAN" entry add info about which
>>> L2-domain you would add the vlan to and at the same time also list
>>> L2-domain for already existing vlans in a format like "1234 (name of
>>> vlan) (L2-domain)"
>>>
>>> Masking of password for AD/LDAP connections
>>> -----------------------------------------------------------------
>>> When entering the overview page for authentication methods
>>> (/?page=administration§ion=authentication-methods) the password
>>> for at least AD authentication is shown in clear text. When trying to
>>> edit, the password is masked.
>>> I would suggest the password to be masked in all places. Maybe an
>>> option to unmask in the edit dialogue.
>>>
>>> Let me know if anything is unclear.
>>>
>>> --
>>> Best regards
>>>
>>> Jonas Hauge Jensen
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> -------- BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
>>> Develop your own process in accordance with the BPMN 2 standard Learn
>>> Process modeling best practices with Bonita BPM through live
>>> exercises
>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
>>> event?utm_
>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_S
>>> F _______________________________________________
>>> Phpipam-development mailing list
>>> Php...@li...
>>> https://lists.sourceforge.net/lists/listinfo/phpipam-development
>>
>
> Hvis De har modtaget denne e-mail ved en fejl, bedes den returneret til afsenderen og derefter slettet.
> If you received this email by mistake, please let us know and delete the email.
|
