Re: [phpesp-general] RE: Adding Descriptive text in a survey.

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Haha... this is fun. Ok, Roman, you keep using #11, and
Kon, please use #100 (yes that big). Since there is no user
response to Kon's "Statement" it should be in the same
catagory as a "Page Break". As far as the names, since you
both independantly picked "Statement" -- you figure it out.
I cannot come up with a different name for either of you,
so if you have any alternates let me know.

Kon, if you are interested in doing many more fixes, get a
SF.net account and then email me off list and I will give
you CVS access so you can work directly.

-James

On Sun, 17 Mar 2002, Roman Jasins wrote:

> Good job there, but we have a problem now. There is another branch that
> is being developed  for ESP where Statement question is being used for
> something else. In fact it has the same id(11). This presents a problem
> for the developers. I guess the solution would be to discuss details
> with James first, since he is the Chief Yahoo here, and than put in a
> developers list on the SF.net. This way we should be able to make sure
> that no one will have to go back and rewrite his code.
>
> -Roman
>
>
> On Sunday, March 17, 2002, at 01:20  PM, angek productions wrote:
>
> > All,
> >  
> >     There are a few other files that need to be changed that I have not
> > mentioned.
> >     The changes mentioned below (in my original post) suppress a
> > question number from appearing
> >     next to the Statement, however this means that the next valid
> > question will appear to not
> >     have a consecutive Question number appearing next to it.
> >     for example,
> >         assume our survey has 5 questions which includes the Statement.
> >         If our Statement is question 3 then our survey will show the
> > following:
> >         (1) Question text
> >         (2) Question text
> >             Statement
> >         (4) Question text
> >         (5) Question text
> >  
> >    To correct this the code should be:
> >  
> >     <?php
> >     if ($tid != '11')
> >                         echo ("<A NAME=\"Q($i)\">($i).</A>");   
> >     else
> >             $i--;
> >     ?>
> >  
> >     Once this is done you will notice that viewing survey results, and
> > viewing a survey report will
> >    not be consistent with the above ammendment so the following further
> > changes need to be made
> >    to provide consistency through the entire phpesp package.
> >  
> >    The following files must be changed:
> >    1- /lib/esphtml.results.inc
> >    2- /function/survey_results.inc
> >    3- /function/survey_report.inc
> >    4- /function/survey_merge.inc
> >  
> >    Changes to esphtml.results.inc
> >         line 188 : function
> > mkreslist($counts,$total,$precision,$showTotals) {
> >         should be changed to : function
> > mkreslist($counts,$total,$precision,$showTotals,$tid) {
> >  
> >         after line 191: <table width="90%" border="0" cellpadding="1">
> >         add the following:
> >             <?php if ($tid != '11')
> >                     echo "<tr><th
> > align=\"left\">#</th><th>Response</th></tr>"; ?>
> >        then delete / comment out the line: <tr><th align="left"><?php
> > echo(_('#')); ?></th><th><?php echo(_('Response')); ?></th></tr>
> >  
> >    Changes to survey_results.inc
> >         on about line 167 you should find the following 2 lines:
> >             <tr xbgcolor="<?php echo($bg); ?>">
> >            <td>
> >         add the following straight after the above lines:
> >             <?php
> >                 if ($tid != '11')
> >                     echo ("<A NAME=\"Q($i)\">($i).</A>");
> >                 else
> >                     $i--;
> >             ?>
> >         then delete / comment out the line:
> >             <A NAME="Q<?php echo($i); ?>"><?php echo($i); ?>.</A>
> >  
> >         on about line 324:
> > mkreslist($counts,$total,$precision,$showTotals);
> >         change this to :
> > mkreslist($counts,$total,$precision,$showTotals,$tid);
> >     Changes to survey_report.inc
> >         on about line 85: <tr bgcolor="<?php echo($bg); ?>">
> >         add the following straight after this line:
> >             <?php
> >                 if ($tid != '11'){
> >                     echo "<td align=\"right\">$i</td>";
> >                 }
> >                 else{
> >                     $i--;
> >                     echo "<td align=\"right\"></td>";
> >             }
> >
> >        ?>
> >
> >         then delete / comment out the following line:
> >
> >            <td align="right"><?php echo($i); ?></td>
> >
> > Finally,
> >
> >             just to be consistent with the changes made to the
> > mkreslist function in both esphtml.results.inc and survey_results.inc
> > we need to make the same change to the survey_merge file.
> >
> >         line 350:mkreslist($counts,$total,$precision,$showTotals);
> > needs to be changed to:
> >
> >                 mkreslist($counts,$total,$precision,$showTotals, $tid);
> >
> >  
> >
> > This should be all. If you have any problems with these changes post
> > them here.......
> >
> > Kon           
> >
> >
> >  
> >
> > -----Original Message-----
> > From: Kon Angelopoulos [mailto:ang...@ip...]
> > Sent: Sunday, 17 March 2002 7:40 PM
> > To: an...@cp...
> > Subject: FW: Adding Descriptive text in a survey.
> >
> >
> >
> >  -----Original Message-----
> > From:   Kon Angelopoulos [mailto:ang...@ip...]
> > Sent:   Sunday, 17 March 2002 7:10 PM
> > To:     'php...@li...'
> > Subject:        Adding Descriptive text in a survey.
> >
> > Hi All,
> >
> >         One of the features I needed phpesp to have was the ability of
> > adding descriptive text in a survey without having it
> >
> >         be a question. I've also noticed that this has also appeared in
> > the feature requests so I decided to do this myself.
> >
> >         Here are the steps.
> >
> >         1. log into the phpesp database and issue the following sql
> > statement:
> >                 " insert into question_type
> > values(11,'Statement','N','response_text'); "
> >        
> >         2. now edit the /admin/include/function/survey_render.inc file.
> >                A:/
> >                 go to line 85.
> >                 the original line (version 1.5) is:
> >                         <?php if($question['required']=='Y')
> > { echo('<font color="#FF0000">*</font>'); } ?><A NAME="Q<?php echo($i);
> > ?>"><?php echo($i); ?>.</A>
> >
> >                 change this line to:
> >                 <?php if($question['required']=='Y') { echo('<font
> > color="#FF0000">*</font>'); } ?>
> >                 and then add the following line 4 lines:
> >                 <?php
> >                 if ($tid != '11')
> >                         echo ("<A NAME=\"Q($i)\">($i).</A>");  
> >                 ?>
> >                 This ensures that the Statement does not have a
> > Question number displayed next to it.
> >
> >                 B:/
> >                 The next step is to find the following line:
> >                 <td valign="TOP" aligh="LEFT"> - this should be line 87
> > in the original file or line 91 if you've added the above code.
> >
> >                 change it to:
> >                 <td valign="TOP" aligh="LEFT" width="95%">
> >                 This will prevent large descriptive text or statements
> > from messing up the formatting of your survey.
> >
> >                 and that is all
> >        
> >                 Simply create or edit a survey, go to the Question tab
> > where you will notice the new item "Statement" in the New Field's
> >
> >                 type dropdown list and enter your statement in the
> > Text's text field.
> >                 There can not be any possible answers to this statement
> > so you do not need to fill in the rest of the fields in the Question
> >
> >                 tab page.
> >
> >                 Enjoy !
> > Regards
> > Kon Angelopoulos
> >
>
>
> _______________________________________________
> phpESP-general mailing list
> php...@li...
> https://lists.sourceforge.net/lists/listinfo/phpesp-general
>