Re: [Perl-workflow-devel] 0.32_4 tests, not good :-/

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Ok,

I did some googling and I found a link to perlmonks:

http://www.perlmonks.org/?node_id=512040

Here is the explanation, taken from ():

#######
The problem in this case is a bug in the XML::SAX::RTF installer,
which registers itself in ...lib.../XML/SAX/ParserDetails.ini.
This ini file is used to determine the default SAX parser and
since XML::SAX::RTF was installed most recently, it is the default.
Unfortunately, XML::SAX::RTF is not an XML parser (despite
generating SAX events) so it should be removed from the
ParserDetails.ini file.

I have reported this problem to the module maintainer some time
ago, but I will try again and submit a patch this time.

Thanks for the test.
Grant
#######

So the problem could be with XML::SAX::RTF
http://rt.cpan.org/Ticket/Display.html?id=5943

I will write Grant and ask how things are going with this and  
hopefully we can get it out of the way by introducing a requirement  
for XML::SAX::RTF (patched version) even though we do not use it.

jonasbn

On 20/08/2008, at 08.30, Jonas Brømsø Nielsen wrote:

> Hello all,
>
> Apparently we have some more issues, the colour report is not  
> available yet, but from the mails and RSS I can see that we have  
> some issues.
>
> The report will be here at some point:
>
> http://cpantesters.perl.org/show/Workflow.html#Workflow-0.32_4
>
> The mails can be seen online, but I have added an excerpt from one  
> below.
>
> I think this is XML parser related, ideas and suggestions are  
> welcome, I will start to dig into this shortly.
>
> jonasbn
> --
>
> Output from '/usr/bin/make test':
>
> PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/ 
> maint-5.10/pjgo6vl/perl-5.10.0@33955/bin/perl "- 
> MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/ 
> arch')" t/*.t
> t/00_load..........................Log4perl: Seems like no  
> initialization happened. Forgot to call init()?
> ok
> t/02_pod...........................skipped: set TEST_POD to enable  
> this test
> t/03_pod-coverage..................skipped: set TEST_POD to enable  
> this test
> t/action...........................ok
> t/action_field.....................ok
> t/action_mailer....................ok
> t/action_null......................ok
> t/base.............................ok
> t/cached_conditions................Processing  
> workflow_cached_condition_condition.xml: No _parse_* routine defined  
> on this driver (If it is a filter, remember to set the Parent  
> property. If you call the parse() method, make sure to set a Source.  
> You may want to call parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x87a1b74)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like your test died before it could output anything.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 3/3 subtests
> t/condition........................Processing  
> workflow_condition.xml: No _parse_* routine defined on this driver  
> (If it is a filter, remember to set the Parent property. If you call  
> the parse() method, make sure to set a Source. You may want to call  
> parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x87b2f60)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 11 tests but only ran 3.
> # Looks like your test died just after 3.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 8/11 subtests
> t/condition_evaluate...............ok
> t/config...........................Processing workflow_action.xml:  
> No _parse_* routine defined on this driver (If it is a filter,  
> remember to set the Parent property. If you call the parse() method,  
> make sure to set a Source. You may want to call parse_uri,  
> parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x86dcdbc)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 47 tests but only ran 6.
> # Looks like your test died just after 6.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 41/47 subtests
> t/context..........................ok
> t/exception........................ok
> t/factory..........................
> #   Failed test at t/factory.t line 30.
> # died: Processing workflow_condition.xml: No _parse_* routine  
> defined on this driver (If it is a filter, remember to set the  
> Parent property. If you call the parse() method, make sure to set a  
> Source. You may want to call parse_uri, parse_string or parse_file  
> instead.) [XML::LibXML::SAX::ChunkParser=HASH(0x87b7ce0)] at /home/ 
> src/perl/repoperls/installed-perls/maint-5.10/pjgo6vl/ 
> perl-5.10.0@33955/lib/site_perl/5.10.0/XML/SAX/Base.pm line 2616.
>
> #   Failed test at t/factory.t line 35.
> # died: Processing workflow_condition.xml: No _parse_* routine  
> defined on this driver (If it is a filter, remember to set the  
> Parent property. If you call the parse() method, make sure to set a  
> Source. You may want to call parse_uri, parse_string or parse_file  
> instead.) [XML::LibXML::SAX::ChunkParser=HASH(0x87b7d80)] at /home/ 
> src/perl/repoperls/installed-perls/maint-5.10/pjgo6vl/ 
> perl-5.10.0@33955/lib/site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you failed 2 tests of 7.
> Dubious, test returned 2 (wstat 512, 0x200)
> Failed 2/7 subtests
> t/factory_subclass.................ok
> t/history..........................ok
> t/persister........................ok
> t/persister_dbi....................Processing  
> workflow_condition.xml: No _parse_* routine defined on this driver  
> (If it is a filter, remember to set the Parent property. If you call  
> the parse() method, make sure to set a Source. You may want to call  
> parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x88fecf4)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 43 tests but only ran 1.
> # Looks like your test died just after 1.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 42/43 subtests
> t/persister_dbi_extra_data.........ok
> t/persister_dbi_sqlite.............Cannot read '/home/sand/.cpan/ 
> build/Workflow-0.32_4-GPzZCN/t/struct/workflow_sqlite.sql': Datei  
> oder Verzeichnis nicht gefunden at TestDBUtil.pm line 93.
> Dubious, test returned 2 (wstat 512, 0x200)
> No subtests run
> t/persister_file...................Processing  
> workflow_condition.xml: No _parse_* routine defined on this driver  
> (If it is a filter, remember to set the Parent property. If you call  
> the parse() method, make sure to set a Source. You may want to call  
> parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x87e097c)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 19 tests but only ran 1.
> # Looks like your test died just after 1.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 18/19 subtests
> t/persister_random_id..............ok
> t/persister_spops..................skipped: SPOPS not installed
> t/persister_uuid...................ok
> t/state............................Processing  
> workflow_condition.xml: No _parse_* routine defined on this driver  
> (If it is a filter, remember to set the Parent property. If you call  
> the parse() method, make sure to set a Source. You may want to call  
> parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x879ec68)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 19 tests but only ran 1.
> # Looks like your test died just after 1.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 18/19 subtests
> t/state_perl.......................# Running with perl config.
> ok
> t/validator........................ok
> t/validator_has_required_field.....ok
> t/validator_in_enumerated_type.....Use of uninitialized value in  
> concatenation (.) or string at /home/sand/.cpan/build/ 
> Workflow-0.32_4-GPzZCN/blib/lib/Workflow/Validator.pm line 19.
> Use of uninitialized value in concatenation (.) or string at /home/ 
> sand/.cpan/build/Workflow-0.32_4-GPzZCN/blib/lib/Workflow/ 
> Validator.pm line 19.
> Use of uninitialized value in concatenation (.) or string at /home/ 
> sand/.cpan/build/Workflow-0.32_4-GPzZCN/blib/lib/Workflow/ 
> Validator.pm line 19.
> ok
> t/validator_matches_date_format....Use of uninitialized value in  
> concatenation (.) or string at /home/sand/.cpan/build/ 
> Workflow-0.32_4-GPzZCN/blib/lib/Workflow/Validator.pm line 19.
> Use of uninitialized value in concatenation (.) or string at /home/ 
> sand/.cpan/build/Workflow-0.32_4-GPzZCN/blib/lib/Workflow/ 
> Validator.pm line 19.
> ok
> t/workflow.........................Processing  
> workflow_condition.xml: No _parse_* routine defined on this driver  
> (If it is a filter, remember to set the Parent property. If you call  
> the parse() method, make sure to set a Source. You may want to call  
> parse_uri, parse_string or parse_file instead.)  
> [XML::LibXML::SAX::ChunkParser=HASH(0x883a1d8)] at /home/src/perl/ 
> repoperls/installed-perls/maint-5.10/pjgo6vl/perl-5.10.0@33955/lib/ 
> site_perl/5.10.0/XML/SAX/Base.pm line 2616.
> # Looks like you planned 35 tests but only ran 1.
> # Looks like your test died just after 1.
> Dubious, test returned 255 (wstat 65280, 0xff00)
> Failed 34/35 subtests
>
> Test Summary Report
> -------------------
> t/cached_conditions            (Wstat: 65280 Tests: 0 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 3 tests but ran 0.
> t/condition                    (Wstat: 65280 Tests: 3 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 11 tests but ran 3.
> t/config                       (Wstat: 65280 Tests: 6 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 47 tests but ran 6.
> t/factory                      (Wstat: 512 Tests: 7 Failed: 2)
>  Failed tests:  6-7
>  Non-zero exit status: 2
> t/persister_dbi                (Wstat: 65280 Tests: 1 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 43 tests but ran 1.
> t/persister_dbi_sqlite         (Wstat: 512 Tests: 0 Failed: 0)
>  Non-zero exit status: 2
>  Parse errors: No plan found in TAP output
> t/persister_file               (Wstat: 65280 Tests: 1 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 19 tests but ran 1.
> t/state                        (Wstat: 65280 Tests: 1 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 19 tests but ran 1.
> t/workflow                     (Wstat: 65280 Tests: 1 Failed: 0)
>  Non-zero exit status: 255
>  Parse errors: Bad plan.  You planned 35 tests but ran 1.
> Files=32, Tests=191, 19 wallclock secs ( 0.24 usr  0.05 sys + 14.34  
> cusr  1.40 csys = 16.03 CPU)
> Result: FAIL
> Failed 9/32 test programs. 2/191 subtests failed.
> make: *** [test_dynamic] Fehler 255
>
> ------------------------------
> PREREQUISITES
> ------------------------------
>
> Prerequisite modules loaded:
>
> requires:
>
>    Module                     Need Have
>    -------------------------- ---- --------
>    Class::Accessor            0.18 0.31
>    Class::Factory             1    1.06
>    Class::Observable          1.04 1.04
>    Data::Dumper               0    2.121_14
>    DateTime                   0.15 0.4304
>    DateTime::Format::Strptime 1    1.0800
>    DBD::Mock                  0.1  1.37
>    DBI                        0    1.607
>    Exception::Class           1.1  1.24
>    List::MoreUtils            0    0.22
>    Log::Dispatch              2    2.21
>    Log::Log4perl              0.34 1.17
>    Safe                       0    2.16
>    Test::Exception            0    0.27
>    Test::More                 0.41 0.80
>    XML::Simple                2    2.18
>
>
>
>
> --
> pauseid: JONASBN
> email: jo...@cp...
> blog: http://use.perl.org/~jonasbn/journal/
>
>