[Perfparse-users] zero values in database

[Jessica H. <Je...@gm...>]

Sorry, but I've forgotten another thing.

First I tell you something, so it's better to understand I hope.

I had problems with the check_load plugin:

nagios@rzvlabwks:/usr/local/nagios/libexec> ./check_load -w 1.5,1.5,1.5 -c
4.0,2.0,2.0
Warning threshold must be float or float triplet!

Usage: check_load -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15


So I get this bad output, but I've found a solution:

nagios@rzvlabwks:/usr/local/nagios/libexec> ./check_load -w 1,5:1,5:1,5 -c
4,0:2,0:2,0
OK - load average: 0,27, 0,30,
0,29|load1=0,270000;1,500000;4,000000;0,000000
load5=0,300000;1,500000;2,000000;0,000000
load15=0,290000;1,500000;2,000000;0,000000


So I think there is a problem with , and . !!!

Some days before the first "version" of my check_load numbers worked but now
I do it with the second.


And now to my right problem...

It's about the values in my database:

47020 | jholle    | Ping                | rta    | 2005-02-28 15:51:39 |    
0 |    85 |       95 |     0 |
| 47021 | jholle    | Ping                | pl     | 2005-02-28 15:51:39 |  
  0 |    40 |       80 |     0 |


There are no values only a zero.

nagios@rzvlabwks:/usr/local/nagios/libexec> ./check_icmp -H jholle
OK - jholle: rta 0.224ms, lost 0%|rta=0.224ms;200.000;500.000;0;
pl=0%;40;80;;


But here are values. When this value goes over 1 it is shown in database,
but only as a 1 not the float integers.
I think this is because of the . ! I think it is like my first problem.
there was a point which could not be interpreted and here is a point again.
I don't know but I think when there is a , and not a . the problem is
solved... 

Can I think right ???

-- 
Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS
GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail