myharrism - 2002-06-27

Sorry for the duplicate submission in IDE....

Has anyone had problems getting their second slot recognised by PCMCIA? This happens for me with all the later versions. Tested it on 3.1.30 and 3.1.34 although it did work with 3.1.28.

Output from /var/log/messages under 3.1.34

Jun 22 20:18:04 zenlx kernel: unloading PCMCIA Card Services
Jun 22 20:18:42 zenlx kernel: Linux PCMCIA Card Services 3.1.34
Jun 22 20:18:42 zenlx kernel: kernel build: 2.4.4-4GB #1 Fri May 18 14:11:12 GMT 2001
Jun 22 20:18:42 zenlx kernel: options: [pci] [cardbus] [apm]
Jun 22 20:18:43 zenlx kernel: 0x378: FIFO is 16 bytes
Jun 22 20:18:43 zenlx kernel: 0x378: writeIntrThreshold is 8
Jun 22 20:18:43 zenlx kernel: 0x378: readIntrThreshold is 8
Jun 22 20:18:43 zenlx kernel: 0x378: PWord is 8 bits
Jun 22 20:18:43 zenlx kernel: 0x378: Interrupts are ISA-Pulses
Jun 22 20:18:43 zenlx kernel: 0x378: ECP port cfgA=0x10 cfgB=0x00
Jun 22 20:18:43 zenlx kernel: 0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
Jun 22 20:18:43 zenlx kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
Jun 22 20:18:43 zenlx kernel: parport0: irq 7 detected
Jun 22 20:18:43 zenlx kernel: parport0: cpp_daisy: aa5500ff(38)
Jun 22 20:18:43 zenlx kernel: parport0: assign_addrs: aa5500ff(38)
Jun 22 20:18:43 zenlx kernel: parport0: cpp_daisy: aa5500ff(38)
Jun 22 20:18:43 zenlx kernel: parport0: assign_addrs: aa5500ff(38)
Jun 22 20:20:57 zenlx pcmcia: /sbin/insmod /lib/modules/2.4.4-4GB/pcmcia/i82365.o
Jun 22 20:20:57 zenlx kernel: Intel ISA/PCI/CardBus PCIC probe:
Jun 22 20:20:57 zenlx kernel: PCI: Found IRQ 11 for device 02:0f.0
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 00:1f.2
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:06.0
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:0f.1
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:0f.2
Jun 22 20:20:57 zenlx kernel: PCI: Found IRQ 11 for device 02:0f.1
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 00:1f.2
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:06.0
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:0f.0
Jun 22 20:20:57 zenlx kernel: PCI: The same IRQ used for device 02:0f.2
Jun 22 20:20:57 zenlx kernel: TI 4451 rev 00 PCI-to-CardBus at slot 02:0f, mem 0xf4000000
Jun 22 20:20:57 zenlx kernel: host opts [0]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 3/6]
Jun 22 20:20:57 zenlx kernel: host opts [1]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 7/10]
Jun 22 20:20:57 zenlx kernel: ISA irqs (scanned) = 3,4,7,9,10,15 PCI status changes
Jun 22 20:20:57 zenlx pcmcia: /sbin/insmod /lib/modules/2.4.4-4GB/pcmcia/ds.o
Jun 22 20:20:57 zenlx pcmcia: Using /lib/modules/2.4.4-4GB/pcmcia/ds.o
Jun 22 20:20:57 zenlx pcmcia: Symbol version prefix ''
Jun 22 20:20:57 zenlx cardmgr[2572]: open_sock(socket 1) failed: Device or resource busy
Jun 22 20:20:57 zenlx cardmgr[2572]: watching 1 sockets
Jun 22 20:20:57 zenlx cardmgr[2573]: starting, version is 3.1.34