Tecra 8100, 2.4.2, 3.1.24 and apa-1480b

2001-03-05
2001-03-09
  • Nino Margetic

    Nino Margetic - 2001-03-05

    Hi,

    I'm trying to use the new apa-1480b (cardbus) adaptec scsi card and the machine freezes every time I insert the card. All my other cards (non-cb) work fine (3c589, aha-1640). The last syslog messages indicate that the card is recognized correctly (an attempt to load apa1480_cb. module) . All running on a Tecra 8100 (latest bios v2.3), latest kernel (2.4.2), latest pcmcia (3.1.24). Using pcmcia-cs drivers (not kernel-supplied). Any suggestions how to get this going?
    Thx.

    --Nino

    PS dmesg output follows..

    Mar  4 17:40:40 mirna kernel: Linux PCMCIA Card Services 3.1.24
    Mar  4 17:40:40 mirna kernel:   kernel build: 2.4.2 #3 Sun Mar 4 13:02:01 MET 2001
    Mar  4 17:40:40 mirna kernel:   options:  [pci] [cardbus] [apm]
    Mar  4 17:40:40 mirna kernel: Intel PCIC probe: PCI: Found IRQ 11 for device 00:0b.0
    Mar  4 17:40:40 mirna kernel: PCI: Found IRQ 11 for device 00:0b.1
    Mar  4 17:40:40 mirna kernel:
    Mar  4 17:40:40 mirna kernel:   Toshiba ToPIC100 rev 20 PCI-to-CardBus at slot 00:0b, mem 0x10000000
    Mar  4 17:40:40 mirna kernel:     host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0xc000000] [pci irq 11] [lat 64/176] [bus 20/20]
    Mar  4 17:40:40 mirna kernel:     host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0xc000000] [pci irq 11] [lat 64/176] [bus 21/21]
    Mar  4 17:40:40 mirna kernel:     ISA irqs (default) = 3,4,5,7,9,10,12 PCI status changes
    Mar  4 17:40:40 mirna cardmgr[3175]: starting, version is 3.1.24
    Mar  4 17:40:40 mirna cardmgr[3175]: watching 2 sockets
    Mar  4 17:40:40 mirna kernel: cs: IO port probe 0x1000-0x17ff: clean.
    Mar  4 17:40:40 mirna kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
    Mar  4 17:40:40 mirna kernel: cs: IO port probe 0x0a00-0x0aff: clean.
    Mar  4 17:40:44 mirna cardmgr[3175]: initializing socket 0
    Mar  4 17:40:44 mirna cardmgr[3175]: socket 0: 3Com 589 Ethernet
    Mar  4 17:40:44 mirna kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
    Mar  4 17:40:44 mirna cardmgr[3175]: executing: 'modprobe 3c589_cs'
    Mar  4 17:40:44 mirna kernel: eth0: 3Com 3c589, io 0x300, irq 3, hw_addr 00:10:5A:92:CC:A6
    Mar  4 17:40:44 mirna kernel:   8K FIFO split 5:3 Rx:Tx, auto xcvr
    Mar  4 17:40:44 mirna cardmgr[3175]: executing: './network start eth0'
    Mar  4 17:40:44 mirna lpd: lpd shutdown succeeded
    Mar  4 17:40:44 mirna cardmgr[3175]: + Stopping lpd: [  OK  ]^M
    Mar  4 17:40:44 mirna kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
    Mar  4 17:40:44 mirna kernel: parport0: irq 7 detected
    Mar  4 17:40:44 mirna kernel: lp0: using parport0 (polling).
    Mar  4 17:40:44 mirna lpd: lpd startup succeeded
    Mar  4 17:40:44 mirna cardmgr[3175]: + Starting lpd: [  OK  ]^M
    Mar  4 17:40:45 mirna kernel: eth0: flipped to 10baseT
    Mar  4 17:42:14 mirna cardmgr[3175]: initializing socket 1
    Mar  4 17:42:14 mirna cardmgr[3175]: socket 1: Adaptec APA-1480 SCSI Host Adapter
    Mar  4 17:42:14 mirna kernel: cs: cb_alloc(bus 21): vendor 0x9004, device 0x6075
    Mar  4 17:42:15 mirna cardmgr[3175]: executing: 'modprobe cb_enabler'
    Mar  4 17:42:15 mirna cardmgr[3175]: executing: 'modprobe apa1480_cb'

    ^^^^^^^^^^^^^^^^^^^^^^^^^ system frozen

    Mar  4 17:45:29 mirna syslogd 1.3-3: restart.
    Mar  4 17:45:29 mirna syslog: syslogd startup succeeded
    Mar  4 17:45:29 mirna kernel: klogd 1.3-3, log source = /proc/kmsg started.

     
    • David Hinds

      David Hinds - 2001-03-06
       
    • Nino Margetic

      Nino Margetic - 2001-03-09

      Thanks. Will do.

      --Nino

       

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks