You are correct. If I uncheck "Lock database on minimize" then close the program, it does not give the error the next time I start the program. However it is certainly less secure to leave the database open constantly on my desktop.

 

<Frank>

e-mail: fhearl@me.com

 

From: Philip Le Riche [mailto:pleriche@users.sf.net]
Sent: Friday, April 04, 2014 9:56 AM
To: [passwordsafe:bugs]
Subject: [passwordsafe:bugs] Re: #1149 "Requested mode change failed"

 

Hi Andrey -

Very glad that's helped locate it - it's been a tough one. And I can
confirm that unchecking Lock Database on Minimise is a work-around,
though not a very desirable one! I look forward to testing an updated
version.

Best regards - Philip

On 04/04/2014 14:26, Andrey Kuznetsov wrote:

Hi Philip,
Thanks for dump and stack trace!
Now I can reproduce the issue: this message is shown when "Lock
database on minimize" enabled (DatabaseClear set to 1 in config file).
[As temporary workaround, you may disable this option until issue will
be fixed.]
I'll debug and fix it tomorrow.


[bugs:#1149] http://sourceforge.net/p/passwordsafe/bugs/1149/
"Requested mode change failed"

Status: accepted
Group: v1.0_(example)
Created: Sun Dec 08, 2013 08:07 PM UTC by Philip Le Riche
Last Updated: Tue Apr 01, 2014 05:01 AM UTC
Owner: Rony Shapiro

Having upgraded to v3.32, launching PaswordSafe (with -s option) gives
a popup with a title "Requested mode change failed", saying "Failed to
switch from R/W to R-O: Could not release database lock." Clicking OK,
PasswordSafe appears to run normally.


Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/passwordsafe/bugs/1149/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/


[bugs:#1149] "Requested mode change failed"

Status: accepted
Group: v1.0_(example)
Created: Sun Dec 08, 2013 08:07 PM UTC by Philip Le Riche
Last Updated: Fri Apr 04, 2014 01:26 PM UTC
Owner: Rony Shapiro

Having upgraded to v3.32, launching PaswordSafe (with -s option) gives a popup with a title "Requested mode change failed", saying "Failed to switch from R/W to R-O: Could not release database lock." Clicking OK, PasswordSafe appears to run normally.


Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/passwordsafe/bugs/1149/

To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/