ossim-developer

[OSSIM] Ossimplanet-1.6.8-5 on Windows XP

[Schalcosky, B. A C. 2. <bri...@na...>]

I'm having a problem getting the version of Ossimplanet that's currently
in the Windows downloads section or ossim.org to work consistently on
Windows XP.  I can install it without any problems and on some of my
computers it works fine when I run the application.  On others, however,
I get the attached error message when I try to run Ossimplanet.

If the image doesn't come through, the error message is:=20

This application has failed to start because the application
configuration is incorrect.  Reinstalling the application may fix the
problem.

I've tried reinstalling and it hasn't helped.  I also can't figure out
any common thread between the computers that Ossimplanet will work on
and the ones on which it will not work. I've seen this error on a
variety of old and new hardware.

So - has anyone had this problem themselves?  Is there a fix for it?

If there's isn't a known fix, can someone tell me what it sorts of
situations can cause this error message to be produced?  What does
Ossimplanet 'configure' when it is installed? =20

Thanks,

Brian Schalcosky

Re: [OSSIM] Ossimplanet-1.6.8-5 on Windows XP

[Don K. <Don...@an...>]

Brian,
=20
If your using Visual Studio -=20
=20
Copying the c:\program files\microsoft visual studio 8\vc\redist\x86
=20
=20   \Microsoft.vc80.crt=20
=20   \Microsoft.vc80.mfc


as folders in the folder that holds the application.exe.

Don


________________________________

From: oss...@li... on behalf of Schalcos=
ky, Brian A CIV 2734
Sent: Wed 8/15/2007 1:01 PM
To: oss...@li...
Subject: [OSSIM] Ossimplanet-1.6.8-5 on Windows XP



I'm having a problem getting the version of Ossimplanet that's currently
in the Windows downloads section or ossim.org to work consistently on
Windows XP.  I can install it without any problems and on some of my
computers it works fine when I run the application.  On others, however,
I get the attached error message when I try to run Ossimplanet.

If the image doesn't come through, the error message is:

This application has failed to start because the application
configuration is incorrect.  Reinstalling the application may fix the
problem.

I've tried reinstalling and it hasn't helped.  I also can't figure out
any common thread between the computers that Ossimplanet will work on
and the ones on which it will not work. I've seen this error on a
variety of old and new hardware.

So - has anyone had this problem themselves?  Is there a fix for it?

If there's isn't a known fix, can someone tell me what it sorts of
situations can cause this error message to be produced?  What does
Ossimplanet 'configure' when it is installed?=20

Thanks,

Brian Schalcosky



CONFIDENTIALITY NOTE:  This transmission is intended solely for the use o=
f the individual(s) to whom it is addressed and may contain information t=
hat is privileged, confidential, or otherwise exempt from disclosure unde=
r applicable law.  If the reader of this message is not the intended reci=
pient, or an authorized representative of the intended recipient, you are=
=20hereby notified that any review, retransmission, dissemination, distri=
bution, copying of or taking of any action in reliance upon this communic=
ation is strictly prohibited.  If you have received this communication in=
=20error, please delete it from your system without copying or forwarding=
=20it, and notify the sender of the error by reply e-mail.

Re: [OSSIM] Ossimplanet-1.6.8-5 on Windows XP

[MickWilson <Mic...@un...>]

I have hit the same problem today trying to install on a WinXP pro box.
Un-installing and reinstalling did not improve anything.


Schalcosky, Brian A CIV 2734 wrote:
> 
> I'm having a problem getting the version of Ossimplanet that's currently
> in the Windows downloads section or ossim.org to work consistently on
> Windows XP.  I can install it without any problems and on some of my
> computers it works fine when I run the application.  On others, however,
> I get the attached error message when I try to run Ossimplanet.
> 
> If the image doesn't come through, the error message is: 
> 
> This application has failed to start because the application
> configuration is incorrect.  Reinstalling the application may fix the
> problem.
> 
> I've tried reinstalling and it hasn't helped.  I also can't figure out
> any common thread between the computers that Ossimplanet will work on
> and the ones on which it will not work. I've seen this error on a
> variety of old and new hardware.
> 
> So - has anyone had this problem themselves?  Is there a fix for it?
> 
> If there's isn't a known fix, can someone tell me what it sorts of
> situations can cause this error message to be produced?  What does
> Ossimplanet 'configure' when it is installed?  
> 
> Thanks,
> 
> Brian Schalcosky
> 
>  
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> www.ossim.org
> Ossim-developer mailing list
> Oss...@li...
> https://lists.sourceforge.net/lists/listinfo/ossim-developer
> 
> 

-- 
View this message in context: http://www.nabble.com/Ossimplanet-1.6.8-5-on-Windows-XP-tf4274364.html#a12386193
Sent from the Ossim-developer mailing list archive at Nabble.com.