#2413 Schedules longer than two years not applied/visible

[Trimara Corporation]

Problem Summary:
It you try to create a schedule that is greater than two years, it does not apply the schedule for the provider after two years.

Expected Result:
The schedule should be set for the date range entered - regardless of the date range.

Actual Result:
The schedule stops after two years.

Steps to Reproduce:
(1) Create a schedule template - through Admin-->Schedule-->Schedule Setting
(2) Apply the template to a provider - through Admin-->Schedule-->Schedule Setting
(3) In the "Date from" enter 2014-01-01. In the "Date to" enter 2017-12-31.
(4) Go to 2017-01-01 on the Schedule Screen. The schedule template will not appear - it will show the provider as "not on schedule".
(5) Go back to Admin-->Schedule-->Schedule Setting and look at the schedule for the provider again. The schedule still shows 2014-01-01 to 2017-12-31.

Reproduced In:
12_1 Deb 362 (fresh install) + Ubuntu 12 LTS (fresh install)

Additional Information:
* The scheduledate table does not contain the right entries. It should contain one entry for each day in the schedule - it stops at 2015-12-31.
* The rschedule table does indicate the right start and end date for the schedule - in the sdate and edate columns.

[Victor Van Herk]

Solution will be to:
- make schedule duration configurable from the config file.
- fail the operation if user attempts to create schedule longer then configured.

[SBek]

The issue has been replicated on both R12.1 (build #415) and Master (build #2068)

[SBek]

Downgrading the priority as temporary workaround is available (set schedule to < 2 years for now)