From: <geo...@fr...> - 2009-10-15 17:30:21
|
Steve, Thanks for the report, i never had such a segfault. I will have a look. Thanks, ----- "Shaw S.J." <S.J...@sw...> a écrit : > Geoffroy, > > Thanks for fixing this. The image creation now seems to have completed > successfully. > However, right after the image was created, the oscar wizard gave a > segmentation fault. > > I guess I should just re-start the wizard and go ahead and attempt to > deploy the image to the compute nodes. I will try this in the morning. > Below is the point were this occurred. If there are any steps that > have been missed let me know and I'll try running the stage 4 again. > > --- > > --> OSCAR image successfully created > Image build finished. > Added Disk Table for oscarimage based on > /usr/share/oscar/oscarsamples/scsi.gg.disk > Running: /usr/sbin/si_mkautoinstallscript -quiet --autodetect-disks > -image oscarimage -force -ip-assignment static -post-install reboot > ... done > Segmentation fault > > --- > > > Once again thank you. > > Steve. > > > > -----Original Message----- > From: geo...@fr... [mailto:geo...@fr...] > Sent: 14 October 2009 22:17 > To: Shaw S.J. > Cc: osc...@li... > Subject: Re: [Oscar-users] Failure at stage 4 with Centos 5.3 and > 6.0.4] > > Steve, > > The problem is fixed and a new set of RPMs is available, please update > your system and give it a try. > > Thanks, > > ----- "Stephen Shaw" <S.J...@sw...> a écrit : > > > Geoffroy, > > > > Output as requested, > > The modprobe.conf from the headnode is included below also. I can't > > see why amd74xx is involved as the device is not present. > > > > [root@ggargantuan1 oscar]# chroot > > /var/lib/systemimager/images/oscarimage /sbin/mkinitrd -v -f > > --fstab=/etc/fstab.fake /boot/initrd-2.6.18-128.el5.img > 2.6.18-128.el5 > > Creating initramfs > > Looking for deps of module ehci-hcd > > Looking for deps of module ohci-hcd > > Looking for deps of module uhci-hcd > > Looking for deps of module ext3: jbd > > Looking for deps of module jbd > > Looking for driver for device sda2 > > error opening /sys/block: No such file or directory > > Looking for deps of module aic7xxx: scsi_mod scsi_transport_spi > > Looking for deps of module scsi_mod > > Looking for deps of module sd_mod: scsi_mod > > Looking for deps of module scsi_transport_spi: scsi_mod > > Looking for deps of module aacraid: scsi_mod > > Looking for deps of module amd74xx > > No module amd74xx found for kernel 2.6.18-128.el5, aborting. > > > > ------------ > > > > /etc/modprobe.conf from the head node: > > > > alias eth0 tg3 > > alias eth1 tg3 > > alias scsi_hostadapter aic7xxx > > alias scsi_hostadapter1 aacraid > > > > Regards > > Steve. > > > > On Wed, 2009-10-14 at 11:01 -0400, geoffroy.vallee wrote: > > > > Steve, > > > > Can you manually execute the chroot command that generates the > error > > and give me the output? > > > > Thanks, > > > > Le Oct 14, 2009 à 10:51, "Shaw S.J." < S.J...@sw... > a > > écrit : > > > > > Geoffroy, > > > > > > /var/lib/systemimager/images/oscarimage/etc/fstab.fake exits and > > > contains the following single line: > > > > > > /dev/sda2 / ext3 defaults 1 1 > > > > > > Sorry, I probably wasn't very clear. In my original message in > this > > > thread (2009/09/03) the wizard seemed to be failing at the same > > > point as it is now. > > > > > > Looking for deps of module amd74xx > > > No module amd74xx found for kernel 2.6.18-128.el5, aborting. > > > ERROR: Impossible to execute chroot /var/lib/systemimager/images/ > > > oscarimage /sbin/mkinitrd -v -f --fstab=/etc/fstab.fake /boot/ > > > initrd-2.6.18-128.el5.img 2.6.18-128.el5 at > /var/lib/oscar/packages/ > > > sis/api-post-image line 214 > > > > > > Regards > > > Steve. > > > > > > -----Original Message----- > > > From: geo...@fr... [ mailto:geo...@fr... ] > > > Sent: 14 October 2009 15:35 > > > To: Shaw S.J. > > > Cc: osc...@li... > Subject: Re: > [Oscar-users] > > Failure at stage 4 with Centos 5.3 and > > > 6.0.4] > > > > > > Steve, > > > > > > I really do not see why you are saying you are back to the > initial > > > problem, i get report about issues with the generation of the > initrd > > > within the image only since a few days... > > > > > > Anyway, can you tell me if the /var/lib/systemimager/images/ > > > oscarimage/etc/fstab.fake file exists? > > > > > > Thanks, > > > > > > ----- "Shaw S.J." < S.J...@sw... > a écrit : > > > > > >> Geoffroy, > > >> > > >> I've installed this again (from scratch) with the latest RPMs but > I > > >> now seem to be back to the original problem. > > >> Latest logs attached. > > >> > > >> Oscar versions:- > > >> > > >> oscar-base-lib-6.0.5r8878-1 > > >> perl-IO-Tty-1.02-2.oscar > > >> systeminstaller-oscar-x11-2.4.4-2 > > >> modules-default-manpath-oscar-1.0.1-1 > > >> oscar-base-6.0.5r8878-1 > > >> oscar-base-server-6.0.5r8878-1 > > >> atft-server-0.7-7oscar > > >> oscar-6.0.5r8878-1 > > >> oscar-selector-x11-1.2.4-1 > > >> perl-Tk-804.026-1.oscar > > >> modules-oscar-3.2.5-1 > > >> oscar-selector-1.2.4-1 > > >> oscar-base-scripts-6.0.5r8878-1 > > >> systeminstaller-oscar-2.4.4-2 > > >> > > >> Thanks again, > > >> Steve > > >> > > >> > > >> -----Original Message----- > > >> From: geo...@fr... [ mailto:geo...@fr... ] > > >> Sent: 12 October 2009 17:22 > > >> To: Shaw S.J. > > >> Subject: Re: [Oscar-users] Failure at stage 4 with Centos 5.3 > and > > >> 6.0.4] > > >> > > >> Steve, > > >> > > >> Sorry about that, i did not do a good job on that way. Anyway, i > > >> think > > >> i fixed the problem this time and a new set of RPMs is available > > and > > >> include this fix. Can you update your system and give it a try? > > >> > > >> Thanks, > > >> > > >> ----- "Stephen Shaw" < S.J...@sw... > a écrit : > > >> > > >>> Geoffroy, > > >>> > > >>> I still have the ssh error at stage 4 with the package versions > > >>> listed > > >>> below and after another completely fresh CentOS 5.3 install. > > >>> The db_type error is gone though. > > >>> Latest logs attached. > > >>> > > >>> oscar-base-scripts-6.0.5r8872-1 > > >>> atftp-server-0.7-7oscar > > >>> systeminstaller-oscar-2.4.4-2 > > >>> oscar-base-6.0.5r8872-1 > > >>> oscar-base-server-6.0.5r8872-1 > > >>> perl-IO-Tty-1.02-2.oscar > > >>> oscar-selector-1.2.4-1 > > >>> perl-Tk-804.026-1.oscar > > >>> modules-oscar-3.2.5-1 > > >>> oscar-base-lib-6.0.5r8872-1 > > >>> oscar-6.0.5r8872-1 > > >>> oscar-selector-x11-1.2.4-1 > > >>> systeminstaller-oscar-x11-2.4.4-2 > > >>> modules-default-manpath-oscar-1.0.1-1 > > >>> > > >>> Regards > > >>> Steve. > > >>> > > >>> > > >>> On Fri, 2009-10-09 at 21:05 +0200, geo...@fr... > wrote: > > >>>> Steve, > > >>>> > > >>>> I just fixed the db_type error (finally). About the ssh issue, > > >> the > > >>> bug has been fixed yesterday or 2 days ago, and i > double-checked > > >> the > > >>> code, everything looks ok now. Can you confirm me you had the > > >> latest > > >>> version of the RPMs for oscar-base? > > >>>> > > >>>> Thanks, > > >>>> > > >>>> PS: i generated a new set of RPMs for the db_type fix, i > > >> encourage > > >>> you to update your system one more time. > > >>>> > > >>>> > > >>>> ----- "Shaw S.J." < S.J...@sw... > a écrit : > > >>>> > > >>>>> Geoffroy, > > >>>>> > > >>>>> I completely re-installed Centos 5.3 i386 from scratch on the > > >>> head > > >>>>> node and then Oscar (unstable) but the Oscar Wizard failed at > > >>> stage 4 > > >>>>> again with a different error this time (logs attached). > > >>> Interestingly > > >>>>> I get the db_type: no such variable at /etc/oscar/oscar.conf > > >> line > > >>> 7 > > >>>>> right at the beginning of the bootstrap phase even though > this > > >>>>> completes successfully. I've included my current oscar.conf > > >> also > > >>> in > > >>>>> case it helps. > > >>>>> > > >>>>> Thanks again > > >>>>> Steve. > > >>>>> > > >>>>> > > >>>>> > > >>>>> -----Original Message----- > > >>>>> From: geo...@fr... [ mailto:geo...@fr... > ] > > >>>>> Sent: 06 October 2009 21:59 > > >>>>> To: osc...@li... >>>>> Cc: Shaw S.J. > > >>>>> Subject: Re: [Oscar-users] Failure at stage 4 with Centos 5.3 > > >> and > > >>>>> 6.0.4] > > >>>>> > > >>>>> Steve, > > >>>>> > > >>>>> Please, update your system, the RPMs are out-of-date. For the > > >>> logs, > > >>>>> feel free to send them to me directly in order to avoid the > > >>> bouncing. > > >>>>> Also remember that is always better for me to actually have > the > > >>> file, > > >>>>> rather than the logs inside the email body. > > >>>>> > > >>>>> Thanks, > > >>>>> > > >>>>> > > >>>>> ----- "Stephen Shaw" < S.J...@sw... > a écrit : > > >>>>> |