Thanks Joe,
I'll try it out. Is there a way to insert the cciss module with this manual setup?
Thanks again.
Gaicomo


Date: Mon, 22 Feb 2010 10:43:27 -0600
From: Joseph.Greenseid@ngc.com
To: oscar-users@lists.sourceforge.net; oscar-users@lists.sourceforge.net
Subject: Re: [Oscar-users] Node Kernel panic

Hi Giacomo,
 
In the past when I've used UYOK, there's a button you click to say that you're going to do it, but you have to generate the ramdisk and kernel image.  When I've done it, I follow this doc:
 
http://svn.oscar.openclustergroup.org/trac/oscar/wiki/InstallGuideClusterInstall#a5.8.4UseYourOwnKernelUYOK
 
--Joe


From: Giacomo Carella [mailto:strippone@hotmail.com]
Sent: Mon 2/22/2010 11:23 AM
To: oscar-users@lists.sourceforge.net
Subject: Re: [Oscar-users] Node Kernel panic

Dear Joe,
I'm not sure I've understood your answer.
I'm a newbie in oscar, so be patient. In setup networking I've checked enable UYOK and setup network boot.
As far as I can understand oscar creates initrd and kernel accordingly and puts it in /tftboot. Is this correct or should I've to generate/copy there something?
Thanks
Giacomo 


Date: Mon, 22 Feb 2010 10:02:32 -0600
From: Joseph.Greenseid@ngc.com
To: oscar-users@lists.sourceforge.net; oscar-users@lists.sourceforge.net
Subject: Re: [Oscar-users] Node Kernel panic

for the UYOK, did you copy the kernel you generated as well as the initrd image?
 
--Joe


From: Giacomo Carella [mailto:strippone@hotmail.com]
Sent: Mon 2/22/2010 10:00 AM
To: oscar-users@lists.sourceforge.net
Subject: [Oscar-users] Node Kernel panic

Dear All,
I'm trying to install oscar 6.0.5r9167-1 on Centos 5.4 x86-64. The head node is an HP dl145 g3. All the nodes are HP bl465. These nodes mounts the Smart Array E200i controller, while the head node not, so I've to use the cciss driver for the nodes.
I've added a modprobe.conf file in  /var/lib/systemimager/overrides/image-name/etc.
This is the content of the file.

alias eth0 bnx2
alias eth1 bnx2
alias scsi_hostadapter cciss

I was able to complete smoothly all the step from 1 to 5.
During step 6 the system was able to sync the image on the first node (I enabled UYOK). When the node rebooted I'd the error kernel panic, not able to find root file system in /dev/root.

It seems that I've problem in creating a proper initrd/vmlinuz for the client.
Can anyone help please.
Thanks in advance
Giacomo



Hotmail: Trusted email with powerful SPAM protection. Sign up now.


Hotmail: Trusted email with powerful SPAM protection. Sign up now.


Hotmail: Trusted email with powerful SPAM protection. Sign up now.