RE: [orbitcpp-list] Problem with running compiled code on two mac hines.

[Alix P. <al...@no...>]

OK. I can ping from both machines. But the peculiar thing is that with TAO
ORB, I can do the same piece of code
but not with OrbitCPP. My concern is that I have missed someting associated
with the OrbitC part of the code
which OrbitCPP uses?!



*
Alix  Pouladdej
Nortel Networks
Advanced Technology  (ATI) 
 www    http://navigate.us.nortel.com/ati
* Tel: (613) 765-6043
            Esn:    (6+) 395-6043
* E-mail: mailto:al...@no... 
*         Fax: (613) 765-0678



-----Original Message-----
From: Dan Kegel [mailto:dk...@ix...] 
Sent: Monday, December 23, 2002 4:37 PM
To: Pouladdej, Alix [CAR:0V11:EXCH]
Cc: orb...@li...
Subject: Re: [orbitcpp-list] Problem with running compiled code on two mac
hines.


OK.  One thing to worry about is the hostname embedded in the IOR.

Make sure both client and server can do
   ping `hostname`
and make sure they can each ping each other by those names, since IORs often
have hostnames rather than IP adrs embedded.
- Dan

Alix Pouladdej wrote:
> Actually, I just use the "string_to_object" facility in this instance
> which turns the
> IOR written to a file into an object id, I don't use any naming service 
> (in our benchmarking
> we evaluate naming service separately),  here is summary of the client
code
>  
>         CORBA::ORB_var orb = CORBA::ORB_init(argc, 
> argv,"orbit-local-orb");
> 
>         // Read and destringify the Og object's IOR.
> 
>         ifstream in("synchronousTests.ior");
>         string ior;
>         in >> ior;
>         CORBA::Object_var obj = orb->string_to_object(ior.c_str());
> 
>         if ( CORBA::is_nil( obj.in() ) )
>             {
>             cerr << "Nil synchronousTests reference" << endl;
>             throw 0;
>             }
>         // Try to narrow to Og::synchronousTests
>         OgB::synchronousTests_var st =
> OgB::synchronousTests::_narrow(obj.in());
>         if (CORBA::is_nil(st.in()))
>             {
>             cerr << "Argument is not a synchronousTests reference" <<
endl;
>             throw 0;
>             }
> 
>         switch (method)
>             {
>             case STEST1:
>                 gettimeofday(&startTime,NULL);
>                 for (i=0;i<repetitions;i++)
>                     {
>                     tr = st->sTest1(100);
>                     }
>                 gettimeofday(&endTime,NULL);
>                 delta = calcDifferenceInTimes(&startTime,&endTime);
>         cout << "result is " << tr << " after " << repetitions <<
>                  " repetitions" << endl;
>                 break;
> 
> 
>             default:
>                 break;
>               }
> 
> 
> 
> 
> *
> Alix  Pouladdej
> Nortel Networks
> Advanced Technology  (ATI)
>  www    http://navigate.us.nortel.com/ati
> * Tel: (613) 765-6043
>             Esn:    (6+) 395-6043
> * E-mail: mailto:al...@no...
> *         Fax: (613) 765-0678
> 
> 
> 
> -----Original Message-----
> From: Dan Kegel [mailto:dk...@ix...]
> Sent: Monday, December 23, 2002 4:15 PM
> To: Pouladdej, Alix [CAR:0V11:EXCH]
> Cc: orb...@li...
> Subject: Re: [orbitcpp-list] Problem with running compiled code on two
> mac hines.
> 
> 
> How do you pass the object reference to the client?
> Does it use a naming service to obtain the reference?
> 
> I did some benchmarks comparing TAO and Orbit; see
> http://www.kegel.com/dkcorbabench/
> - Dan
> 
> Alix Pouladdej wrote:
>  > I run the client as follows:
>  > ./Client -S 1 -R 1000
>  >
>  > where -S and -R are two input parameters to the client's main (-S 
> for  > Synchronous Test and R for number or  > reptitions that the 
> operation is carried out e.g 1000 times as in the  > above case.)
>  >
>  > so, I basically don't provide any additional information for the
>  > client
>  > side! Do I need to?
>  >
>  > Just a note that I run the same set up for TAO ORB and it works; we
>  > are
>  > in the process of compare/contrast
>  > TAO ORB and OrbitCPP for throughput and efficiency.
>  >
>  >
>  >
>  > *
>  > Alix  Pouladdej
>  > Nortel Networks
>  > Advanced Technology  (ATI)
>  >  www    http://navigate.us.nortel.com/ati
>  > * Tel: (613) 765-6043
>  >             Esn:    (6+) 395-6043
>  > * E-mail: mailto:al...@no...
>  > *         Fax: (613) 765-0678
>  >
>  >
>  >
>  > -----Original Message-----
>  > From: Dan Kegel [mailto:dk...@ix...]
>  > Sent: Monday, December 23, 2002 3:59 PM
>  > To: Pouladdej, Alix [CAR:0V11:EXCH];
>  > orb...@li...
>  > Subject: Re: [orbitcpp-list] Problem with running compiled code on two
>  > machines.
>  >
>  >
>  > Alix Pouladdej wrote:
>  >  > I have successfully compiled and run a client and server on the
>  > SAME  > workstation. When I try to run the client and server on
>  > separate  > worksation, it fails
>  >
>  > How do you run the client?
>  >
>  > Can you strace the client to see what it's doing?
>  > A common problem is, the client and server can't ping
>  > each other using the hostname embedded in the, um, URLs
>  > that Corba sends.  (It's been so long I'm forgetting
>  > the lingo.)
>  > - Dan
>  >
> 
> 
>