Oratcl 4.4 Problem

Help
2007-01-08
2013-04-16
  • John L. Huber

    John L. Huber - 2007-01-08

    Hello,

    I am having a problem with oratcl4.4 using tcl/tk 8.3.2.  It will not initiate.  The error message is "Oralob_Init(): Failed to evaluate internal script at index zuOralong_Init(): Failed to evaluate
    internal script at index zuTrying oralogon ...".  Below I have indicate this error message plus 1) a snapshot of the configure log 2) the make log and 3) the make install log.

    I am uncertain if the configuration is ok.  While it finishes with a code "0", there is a warning about threads (sse below) and there are a number of other "failures", but I am thinking that these failures are routine.

    Thanks for your replies

    >>> PROBLEM is ..
    >>> PROBLEM is ..
    >>> PROBLEM is ..

    Oralob_Init(): Failed to evaluate internal script at index zuOralong_Init(): Failed to evaluate

    internal script at index zuTrying oralogon

    ******************************************* configure log begin *******************************
    >>> Configure Log Output (partial) ...
    >>> Configure Log Output (partial) ...
    >>> Configure Log Output (partial) ...

    This file contains any messages produced by compilers while
    running configure, to aid debugging if configure makes a mistake.

    It was created by Oratcl configure 4.4, which was
    generated by GNU Autoconf 2.59.  Invocation command line was

      $ configure --prefix=/usr/local/intercimnc_5.2/TCL --exec-prefix=/usr/local/intercimnc_5.2/TCL

    --enable-shared

    ## --------- ##
    ## Platform. ##
    ## --------- ##

    hostname = dncsun98
    uname -m = sun4u
    uname -r = 5.8
    uname -s = SunOS
    uname -v = Generic_108528-15

    /usr/bin/uname -p = sparc
    /bin/uname -X     = System = SunOS
    Node = dncsun98
    Release = 5.8
    KernelID = Generic_108528-15
    Machine = sun4u
    BusType = <unknown>
    Serial = <unknown>
    Users = <unknown>
    OEM# = 0
    Origin# = 1
    NumCPU = 1

    /bin/arch              = sun4
    /usr/bin/arch -k       = sun4u
    /usr/convex/getsysinfo = unknown
    hostinfo               = unknown
    /bin/machine           = unknown
    /usr/bin/oslevel       = unknown
    /bin/universe          = unknown

    .
    .
    .
    configure:6765: checking for building with threads
    configure:6773: result: yes (default)
    configure:6797: WARNING:
        --enable-threads requested, but building against a Tcl that is NOT
        thread-enabled.  This is an OK configuration that will also run in
        a thread-enabled core.
    configure:6814: checking how to build libraries
    .
    .
    .
    configure:1330: checking for correct TEA configuration
    configure:1349: result: ok (TEA 3.5)
    configure:1475: checking for Tcl configuration
    configure:1591: result: found /usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix/tclConfig.sh
    configure:1597: checking for existence of /usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix/tclConfig.sh
    configure:1601: result: loading
    configure:1773: checking for gcc
    configure:1802: result: no
    configure:1853: checking for cc
    configure:1869: found /opt/SUNWspro/bin/cc
    configure:1879: result: cc
    configure:2043: checking for C compiler version
    configure:2046: cc --version </dev/null >&5
    cc: Warning: option -- passed to ld
    usage: cc [ options] files.  Use 'cc -flags' for details
    configure:2049: $? = 1
    configure:2051: cc -v </dev/null >&5
    usage: cc [ options] files.  Use 'cc -flags' for details
    configure:2054: $? = 1
    configure:2056: cc -V </dev/null >&5
    cc: WorkShop Compilers 4.2 30 Oct 1996 C 4.2
    usage: cc [ options] files.  Use 'cc -flags' for details
    configure:2059: $? = 1
    configure:2082: checking for C compiler default output file name
    configure:2085: cc    conftest.c  >&5
    configure:2088: $? = 0
    configure:2134: result: a.out
    configure:2139: checking whether the C compiler works
    configure:2145: ./a.out
    configure:2148: $? = 0
    configure:2165: result: yes
    configure:2172: checking whether we are cross compiling
    configure:2174: result: no
    configure:2177: checking for suffix of executables
    configure:2179: cc -o conftest    conftest.c  >&5
    configure:2182: $? = 0
    configure:2207: result:
    configure:2213: checking for suffix of object files
    configure:2234: cc -c   conftest.c >&5
    configure:2237: $? = 0
    configure:2259: result: o
    configure:2263: checking whether we are using the GNU C compiler
    configure:2287: cc -c   conftest.c >&5
    "conftest.c", line 14: undefined symbol: choke
    "conftest.c", line 14: syntax error before or at: me
    cc: acomp failed for conftest.c
    configure:2293: $? = 2
    configure: failed program was:
    configure:2319: result: no
    configure:2325: checking whether cc accepts -g
    configure:2346: cc -c -g  conftest.c >&5
    configure:2352: $? = 0
    configure:2356: test -z
    configure:2359: $? = 0
    configure:2362: test -s conftest.o
    configure:2365: $? = 0
    configure:2376: result: yes
    configure:2393: checking for cc option to accept ANSI C
    configure:2463: cc  -c   conftest.c >&5
    "conftest.c", line 52: warning: statement not reached
    configure:2469: $? = 0
    configure:2473: test -z
    configure:2476: $? = 0
    configure:2479: test -s conftest.o
    configure:2482: $? = 0
    configure:2500: result: none needed
    configure:2518: cc -c   conftest.c >&5
    "conftest.c", line 2: undefined or not a type: choke
    "conftest.c", line 2: syntax error before or at: me
    "conftest.c", line 4: undefined or not a type: me
    cc: acomp failed for conftest.c
    configure:2524: $? = 2
    configure: failed program was:
    configure:2662: checking how to run the C preprocessor
    configure:2697: cc -E  conftest.c
    configure:2703: $? = 0
    configure:2735: cc -E  conftest.c
    "conftest.c", line 9: cannot find include file: <ac_nonexistent.h>
    cc: acomp failed for conftest.c
    configure:2741: $? = 2
    configure: failed program was:
    configure:2780: result: cc -E
    configure:2804: cc -E  conftest.c
    configure:2810: $? = 0
    configure:2842: cc -E  conftest.c
    "conftest.c", line 9: cannot find include file: <ac_nonexistent.h>
    cc: acomp failed for conftest.c
    configure:2848: $? = 2
    configure: failed program was:
    configure:2905: checking for a BSD-compatible install
    configure:2960: result: tclconfig/install-sh -c
    configure:2976: checking whether make sets $(MAKE)
    configure:2996: result: yes
    configure:3051: checking for ranlib
    configure:3067: found /usr/ccs/bin/ranlib
    configure:3078: result: ranlib
    configure:3100: checking for egrep
    configure:3110: result: egrep
    configure:3115: checking for ANSI C header files
    configure:3140: cc -c   conftest.c >&5
    configure:3146: $? = 0
    configure:3150: test -z
    configure:3153: $? = 0
    configure:3156: test -s conftest.o
    configure:3159: $? = 0
    configure:3245: cc -o conftest    conftest.c  >&5
    configure:3248: $? = 0
    configure:3250: ./conftest
    configure:3253: $? = 0
    configure:3268: result: yes
    configure:3292: checking for sys/types.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for sys/stat.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for stdlib.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for string.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for memory.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for strings.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for inttypes.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3292: checking for stdint.h
    configure:3308: cc -c   conftest.c >&5
    "conftest.c", line 52: cannot find include file: <stdint.h>
    cc: acomp failed for conftest.c
    configure:3314: $? = 2
    configure: failed program was:
    configure:3338: result: no
    configure:3292: checking for unistd.h
    configure:3308: cc -c   conftest.c >&5
    configure:3314: $? = 0
    configure:3318: test -z
    configure:3321: $? = 0
    configure:3324: test -s conftest.o
    configure:3327: $? = 0
    configure:3338: result: yes
    configure:3418: checking whether byte ordering is bigendian
    configure:3445: cc -c   conftest.c >&5
    "conftest.c", line 25: undefined symbol: bogus
    "conftest.c", line 25: syntax error before or at: endian
    cc: acomp failed for conftest.c
    configure:3451: $? = 2
    configure: failed program was:
    configure:3605: cc -o conftest    conftest.c  >&5
    configure:3608: $? = 0
    configure:3610: ./conftest
    configure:3613: $? = 1
    configure: program exited with status 1
    configure: failed program was:
    configure:3629: result: yes
    configure:3657: checking for sin
    configure:3714: cc -o conftest    conftest.c  >&5
    "conftest.c", line 61: warning: statement not reached
    ld: fatal: Symbol referencing errors. No output written to conftest
    configure:3720: $? = 1
    configure: failed program was:
    configure:3745: result: no
    configure:3753: checking for main in -lieee
    configure:3777: cc -o conftest    conftest.c -lieee   >&5
    ld: fatal: library -lieee: not found
    ld: fatal: File processing errors. No output written to conftest
    configure:3783: $? = 1
    configure: failed program was:
    configure:3809: result: no
    configure:3821: checking for main in -linet
    configure:3845: cc -o conftest    conftest.c -linet   >&5
    ld: fatal: library -linet: not found
    ld: fatal: File processing errors. No output written to conftest
    configure:3851: $? = 1
    configure: failed program was:
    configure:3877: result: no
    configure:3893: checking net/errno.h usability
    configure:3905: cc -c   conftest.c >&5
    "conftest.c", line 53: cannot find include file: <net/errno.h>
    cc: acomp failed for conftest.c
    configure:3911: $? = 2
    configure: failed program was:
    configure:3934: result: no
    configure:3938: checking net/errno.h presence
    configure:3948: cc -E  conftest.c
    "conftest.c", line 19: cannot find include file: <net/errno.h>
    cc: acomp failed for conftest.c
    configure:3954: $? = 2
    configure: failed program was:
    configure:3974: result: no
    configure:4009: checking for net/errno.h
    configure:4016: result: no
    configure:4050: checking for connect
    configure:4107: cc -o conftest    conftest.c  >&5
    "conftest.c", line 61: warning: statement not reached
    ld: fatal: Symbol referencing errors. No output written to conftest
    configure:4113: $? = 1
    configure: failed program was:
    configure:4138: result: no
    configure:4147: checking for setsockopt
    configure:4204: cc -o conftest    conftest.c  >&5
    "conftest.c", line 61: warning: statement not reached
    ld: fatal: Symbol referencing errors. No output written to conftest
    configure:4210: $? = 1
    configure: failed program was:
    configure:4235: result: no
    configure:4240: checking for setsockopt in -lsocket
    configure:4270: cc -o conftest    conftest.c -lsocket   >&5
    configure:4276: $? = 0
    configure:4280: test -z
    configure:4283: $? = 0
    configure:4286: test -s conftest
    configure:4289: $? = 0
    configure:4302: result: yes
    configure:4413: checking for gethostbyname
    configure:4470: cc -o conftest    conftest.c  -lsocket >&5
    "conftest.c", line 61: warning: statement not reached
    ld: fatal: Symbol referencing errors. No output written to conftest
    configure:4476: $? = 1
    configure: failed program was:
    configure:4501: result: no
    configure:4506: checking for gethostbyname in -lnsl
    configure:4536: cc -o conftest    conftest.c -lnsl   -lsocket >&5
    configure:4542: $? = 0
    configure:4546: test -z
    configure:4549: $? = 0
    configure:4552: test -s conftest
    configure:4555: $? = 0
    configure:4568: result: yes
    configure:4585: checking dirent.h
    configure:4625: cc -o conftest    conftest.c  -lsocket -lnsl >&5
    configure:4631: $? = 0
    configure:4635: test -z
    configure:4638: $? = 0
    configure:4641: test -s conftest
    configure:4644: $? = 0
    configure:4656: result: yes
    configure:4677: checking errno.h usability
    configure:4689: cc -c   conftest.c >&5
    configure:4695: $? = 0
    configure:4699: test -z
    configure:4702: $? = 0
    configure:4705: test -s conftest.o
    configure:4708: $? = 0
    configure:4718: result: yes
    configure:4722: checking errno.h presence
    configure:4732: cc -E  conftest.c
    configure:4738: $? = 0
    configure:4758: result: yes
    configure:4793: checking for errno.h
    configure:4800: result: yes
    configure:4825: checking float.h usability
    configure:4837: cc -c   conftest.c >&5
    configure:4843: $? = 0
    configure:4847: test -z
    configure:4850: $? = 0
    configure:4853: test -s conftest.o
    configure:4856: $? = 0
    configure:4866: result: yes
    configure:4870: checking float.h presence
    configure:4880: cc -E  conftest.c
    configure:4886: $? = 0
    configure:4906: result: yes
    configure:4941: checking for float.h
    configure:4948: result: yes
    configure:4973: checking values.h usability
    configure:4985: cc -c   conftest.c >&5
    configure:4991: $? = 0
    configure:4995: test -z
    configure:4998: $? = 0
    configure:5001: test -s conftest.o
    configure:5004: $? = 0
    configure:5014: result: yes
    configure:5018: checking values.h presence
    configure:5028: cc -E  conftest.c
    configure:5034: $? = 0
    configure:5054: result: yes
    configure:5089: checking for values.h
    configure:5096: result: yes
    configure:5121: checking limits.h usability
    configure:5133: cc -c   conftest.c >&5
    configure:5139: $? = 0
    configure:5143: test -z
    configure:5146: $? = 0
    configure:5149: test -s conftest.o
    configure:5152: $? = 0
    configure:5162: result: yes
    configure:5166: checking limits.h presence
    configure:5176: cc -E  conftest.c
    configure:5182: $? = 0
    configure:5202: result: yes
    configure:5237: checking for limits.h
    configure:5244: result: yes
    configure:5264: checking for stdlib.h
    configure:5269: result: yes
    configure:5466: checking for string.h
    configure:5471: result: yes
    configure:5665: checking sys/wait.h usability
    configure:5677: cc -c   conftest.c >&5
    configure:5683: $? = 0
    configure:5687: test -z
    configure:5690: $? = 0
    configure:5693: test -s conftest.o
    configure:5696: $? = 0
    configure:5706: result: yes
    configure:5710: checking sys/wait.h presence
    configure:5720: cc -E  conftest.c
    configure:5726: $? = 0
    configure:5746: result: yes
    configure:5781: checking for sys/wait.h
    configure:5788: result: yes
    configure:5813: checking dlfcn.h usability
    configure:5825: cc -c   conftest.c >&5
    configure:5831: $? = 0
    configure:5835: test -z
    configure:5838: $? = 0
    configure:5841: test -s conftest.o
    configure:5844: $? = 0
    configure:5854: result: yes
    configure:5858: checking dlfcn.h presence
    configure:5868: cc -E  conftest.c
    configure:5874: $? = 0
    configure:5894: result: yes
    configure:5929: checking for dlfcn.h
    configure:5936: result: yes
    configure:5967: checking sys/param.h usability
    configure:5979: cc -c   conftest.c >&5
    configure:5985: $? = 0
    configure:5989: test -z
    configure:5992: $? = 0
    configure:5995: test -s conftest.o
    configure:5998: $? = 0
    configure:6008: result: yes
    configure:6012: checking sys/param.h presence
    configure:6022: cc -E  conftest.c
    configure:6028: $? = 0
    configure:6048: result: yes
    configure:6083: checking for sys/param.h
    configure:6090: result: yes
    configure:6239: checking for Tcl public headers
    configure:6313: result: /usr/local/intercimnc_5.2/TCL/tcl8.3.2/generic
    configure:6382: checking for pthread_mutex_init in -lpthread
    configure:6412: cc -o conftest    conftest.c -lpthread   -lsocket -lnsl >&5
    configure:6418: $? = 0
    configure:6422: test -z
    configure:6425: $? = 0
    configure:6428: test -s conftest
    configure:6431: $? = 0
    configure:6444: result: yes
    configure:6765: checking for building with threads
    configure:6773: result: yes (default)
    configure:6797: WARNING:
    configure:6814: checking how to build libraries
    configure:6832: result: shared
    configure:6859: checking if 64bit support is requested
    configure:6868: result: no
    configure:6873: checking if 64bit Sparc VIS support is requested
    configure:6882: result: no
    configure:6910: checking system version
    configure:6940: result: SunOS-5.8
    configure:6948: checking for dlopen in -ldl
    configure:6978: cc -o conftest    conftest.c -ldl   -lsocket -lnsl >&5
    configure:6984: $? = 0
    configure:6988: test -z
    configure:6991: $? = 0
    configure:6994: test -s conftest
    configure:6997: $? = 0
    configure:7010: result: yes
    configure:7051: checking for ar
    configure:7067: found /usr/ccs/bin/ar
    configure:7077: result: ar
    configure:8698: checking for required early compiler flags
    configure:8721: cc -c   conftest.c >&5
    configure:8727: $? = 0
    configure:8731: test -z
    configure:8734: $? = 0
    configure:8737: test -s conftest.o
    configure:8740: $? = 0
    configure:8826: cc -c   conftest.c >&5
    configure:8832: $? = 0
    configure:8836: test -z
    configure:8839: $? = 0
    configure:8842: test -s conftest.o
    configure:8845: $? = 0
    configure:8931: cc -c   conftest.c >&5
    "conftest.c", line 32: undefined symbol: open64
    cc: acomp failed for conftest.c
    configure:8937: $? = 2
    configure: failed program was:
    configure:8974: cc -c   conftest.c >&5
    "conftest.c", line 33: undefined symbol: open64
    cc: acomp failed for conftest.c
    configure:8980: $? = 2
    configure: failed program was:
    configure:9017: result: none
    configure:9025: checking for 64-bit integer type
    configure:9049: cc -c   conftest.c >&5
    "conftest.c", line 32: undefined symbol: __int64
    "conftest.c", line 32: syntax error before or at: value
    cc: acomp failed for conftest.c
    configure:9055: $? = 2
    configure: failed program was:
    configure:9099: cc -c   conftest.c >&5
    configure:9105: $? = 0
    configure:9109: test -z
    configure:9112: $? = 0
    configure:9115: test -s conftest.o
    configure:9118: $? = 0
    configure:9149: result: long long
    configure:9153: checking for struct dirent64
    configure:9176: cc -c   conftest.c >&5
    configure:9182: $? = 0
    configure:9186: test -z
    configure:9189: $? = 0
    configure:9192: test -s conftest.o
    configure:9195: $? = 0
    configure:9206: result: yes
    configure:9216: checking for struct stat64
    configure:9239: cc -c   conftest.c >&5
    configure:9245: $? = 0
    configure:9249: test -z
    configure:9252: $? = 0
    configure:9255: test -s conftest.o
    configure:9258: $? = 0
    configure:9269: result: yes
    configure:9284: checking for open64
    configure:9341: cc -o conftest     conftest.c  -lsocket -lnsl >&5
    "conftest.c", line 73: warning: statement not reached
    configure:9347: $? = 0
    configure:9351: test -z
    configure:9354: $? = 0
    configure:9357: test -s conftest
    configure:9360: $? = 0
    configure:9372: result: yes
    configure:9284: checking for lseek64
    configure:9341: cc -o conftest     conftest.c  -lsocket -lnsl >&5
    "conftest.c", line 74: warning: statement not reached
    configure:9347: $? = 0
    configure:9351: test -z
    configure:9354: $? = 0
    configure:9357: test -s conftest
    configure:9360: $? = 0
    configure:9372: result: yes
    configure:9382: checking for off64_t
    configure:9405: cc -c   conftest.c >&5
    configure:9411: $? = 0
    configure:9415: test -z
    configure:9418: $? = 0
    configure:9421: test -s conftest.o
    configure:9424: $? = 0
    configure:9444: result: yes
    configure:9460: checking for build with symbols
    configure:9473: result: no
    configure:9637: checking for tclsh
    configure:9664: result: /usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix/tclsh
    configure:9672: checking for dlfcn.h
    configure:9677: result: yes
    configure:9956: creating ./config.status
    config.status:695: creating Makefile
    PATH_SEPARATOR=':'
    RANLIB=':'
    configure: exit 0
    .
    .
    .

    ## ----------------- ##
    ## Output variables. ##
    ## ----------------- ##

    AR='ar'
    CC='cc'
    CELIB_DIR=''
    CFLAGS=' ${CFLAGS_DEFAULT} ${CFLAGS_WARNING} ${SHLIB_CFLAGS}'
    CFLAGS_DEBUG='-g'
    CFLAGS_DEFAULT='-O'
    CFLAGS_OPTIMIZE='-O'
    CFLAGS_WARNING=''
    CLEANFILES='pkgIndex.tcl'
    CPP='cc -E'
    CPPFLAGS=''
    CYGPATH='echo'
    DEFS='-DPACKAGE_NAME=\&quot;Oratcl\&quot; -DPACKAGE_TARNAME=\&quot;oratcl\&quot; -DPACKAGE_VERSION=\&quot;4.4\&quot;

    -DPACKAGE_STRING=\&quot;Oratcl\ 4.4\&quot; -DPACKAGE_BUGREPORT=\&quot;\&quot; -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1

    -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1

    -DHAVE_INTTYPES_H=1 -DHAVE_UNISTD_H=1 -DWORDS_BIGENDIAN=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1

    -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1

    -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_DIRENT64=1

    -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1

    -DHAVE_DLFCN_H=1 -DSHLIB_SUFFIX=\&quot;.so\&quot; '
    DL_LIBS='-ldl'
    ECHO_C=''
    ECHO_N='-n'
    ECHO_T=''
    EGREP='egrep'
    EXEEXT=''
    INSTALL_DATA='${INSTALL} -m 644'
    INSTALL_PROGRAM='${INSTALL}'
    INSTALL_SCRIPT='${INSTALL}'
    LDFLAGS=' '
    LDFLAGS_DEFAULT=' '
    LD_LIBRARY_PATH_VAR='LD_LIBRARY_PATH'
    LIBOBJS=''
    LIBS=' -lsocket -lnsl'
    LTLIBOBJS=''
    MAKE_LIB='${SHLIB_LD} -o $@ $(PKG_OBJECTS) ${SHLIB_LD_LIBS} '
    MAKE_SHARED_LIB='${SHLIB_LD} -o $@ $(PKG_OBJECTS) ${SHLIB_LD_LIBS}'
    MAKE_STATIC_LIB='${STLIB_LD} $@ $(PKG_OBJECTS)'
    MAKE_STUB_LIB='${STLIB_LD} $@ $(PKG_STUB_OBJECTS)'
    MATH_LIBS='-lm'
    OBJEXT='o'
    PACKAGE_BUGREPORT=''
    PACKAGE_NAME='Oratcl'
    PACKAGE_STRING='Oratcl 4.4'
    PACKAGE_TARNAME='oratcl'
    PACKAGE_VERSION='4.4'
    PATH_SEPARATOR=':'
    PKG_CFLAGS=' '
    PKG_HEADERS=''
    PKG_INCLUDES=''
    PKG_LIBS=''
    PKG_LIB_FILE='libOratcl4.4.so'
    PKG_OBJECTS=' oratcl.o oralob.o oralong.o'
    PKG_SOURCES=' oratcl.c oralob.c oralong.c'
    PKG_STUB_LIB_FILE='libOratclstub4.4.a'
    PKG_STUB_OBJECTS=''
    PKG_STUB_SOURCES=''
    PKG_TCL_SOURCES=''
    RANLIB=':'
    RANLIB_STUB='ranlib'
    SET_MAKE=''
    SHARED_BUILD='1'
    SHELL='/bin/bash'
    SHLIB_CFLAGS='-KPIC'
    SHLIB_LD='/usr/ccs/bin/ld -G -z text'
    SHLIB_LD_LIBS='${LIBS} -L/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix -ltclstub8.3'
    STLIB_LD='${AR} cr'
    TCLSH_PROG='/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix/tclsh'
    TCL_BIN_DIR='/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix'
    TCL_DBGX=''
    TCL_DEFS=' -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 -DHAVE_STRSTR=1

    -DHAVE_STRTOL=1 -DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1

    -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_TZNAME=1 -DHAVE_TIMEZONE_VAR=1

    -DHAVE_ST_BLKSIZE=1 -DSTDC_HEADERS=1 -DNO_UNION_WAIT=1 -DNEED_MATHERR=1 -DHAVE_SIGNED_CHAR=1

    -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_FILIO_H=1 '
    TCL_EXTRA_CFLAGS=''
    TCL_INCLUDES='-I"/usr/local/intercimnc_5.2/TCL/tcl8.3.2/generic"'
    TCL_LD_FLAGS=''
    TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
    TCL_LIB_FILE='libtcl8.3.so'
    TCL_LIB_FLAG='-ltcl8.3'
    TCL_LIB_SPEC='-L/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix -ltcl8.3'
    TCL_SHLIB_LD_LIBS='${LIBS}'
    TCL_SRC_DIR='/usr/local/intercimnc_5.2/TCL/tcl8.3.2'
    TCL_STUB_LIB_FILE='libtclstub8.3.a'
    TCL_STUB_LIB_FLAG='-ltclstub8.3'
    TCL_STUB_LIB_SPEC='-L/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix -ltclstub8.3'
    TCL_THREADS='1'
    TCL_VERSION='8.3'
    ac_ct_CC='cc'
    ac_ct_RANLIB='ranlib'
    bindir='${exec_prefix}/bin'
    build_alias=''
    datadir='${prefix}/share'
    exec_prefix='/usr/local/intercimnc_5.2/TCL'
    host_alias=''
    includedir='${prefix}/include'
    infodir='${prefix}/info'
    libdir='${exec_prefix}/lib'
    libexecdir='${exec_prefix}/libexec'
    localstatedir='${prefix}/var'
    mandir='${prefix}/man'
    oldincludedir='/usr/include'
    prefix='/usr/local/intercimnc_5.2/TCL'
    program_transform_name='s,x,x,'
    sbindir='${exec_prefix}/sbin'
    sharedstatedir='${prefix}/com'
    sysconfdir='${prefix}/etc'
    target_alias=''

    ## ----------- ##
    ## confdefs.h. ##
    ## ----------- ##

    #define HAVE_DLFCN_H 1
    #define HAVE_INTTYPES_H 1
    #define HAVE_LIMITS_H 1
    #define HAVE_LSEEK64 1
    #define HAVE_MEMORY_H 1
    #define HAVE_OPEN64 1
    #define HAVE_STDLIB_H 1
    #define HAVE_STRINGS_H 1
    #define HAVE_STRING_H 1
    #define HAVE_STRUCT_DIRENT64 1
    #define HAVE_STRUCT_STAT64 1
    #define HAVE_SYS_PARAM_H 1
    #define HAVE_SYS_STAT_H 1
    #define HAVE_SYS_TYPES_H 1
    #define HAVE_TYPE_OFF64_T 1
    #define HAVE_UNISTD_H 1
    #define PACKAGE_BUGREPORT ""
    #define PACKAGE_NAME "Oratcl"
    #define PACKAGE_STRING "Oratcl 4.4"
    #define PACKAGE_TARNAME "oratcl"
    #define PACKAGE_VERSION "4.4"
    #define SHLIB_SUFFIX ".so"
    #define STDC_HEADERS 1
    #define TCL_THREADS 1
    #define TCL_WIDE_INT_TYPE long long
    #define USE_TCL_STUBS 1
    #define USE_THREAD_ALLOC 1
    #define WORDS_BIGENDIAN 1
    #define _POSIX_PTHREAD_SEMANTICS 1
    #define _POSIX_PTHREAD_SEMANTICS 1
    #define _REENTRANT 1
    #define _REENTRANT 1
    #define _THREAD_SAFE 1

    configure: exit 0
    ***************************************** end configure log *************************************

    >>> Make output ...
    >>> Make output ...
    >>> Make output ...

    cc -DPACKAGE_NAME=\&quot;Oratcl\&quot; -DPACKAGE_TARNAME=\&quot;oratcl\&quot; -DPACKAGE_VERSION=\&quot;4.4\&quot;

    -DPACKAGE_STRING=\&quot;Oratcl\ 4.4\&quot; -DPACKAGE_BUGREPORT=\&quot;\&quot; -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1

    -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1

    -DHAVE_INTTYPES_H=1 -DHAVE_UNISTD_H=1 -DWORDS_BIGENDIAN=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1

    -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1

    -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_DIRENT64=1

    -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1

    -DHAVE_DLFCN_H=1 -DSHLIB_SUFFIX=\&quot;.so\&quot;   -I"/usr/local/intercimnc_5.2/TCL/tcl8.3.2/generic"    -O 

    -KPIC -c `echo ./generic/oratcl.c` -o oratcl.o
    cc -DPACKAGE_NAME=\&quot;Oratcl\&quot; -DPACKAGE_TARNAME=\&quot;oratcl\&quot; -DPACKAGE_VERSION=\&quot;4.4\&quot;

    -DPACKAGE_STRING=\&quot;Oratcl\ 4.4\&quot; -DPACKAGE_BUGREPORT=\&quot;\&quot; -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1

    -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1

    -DHAVE_INTTYPES_H=1 -DHAVE_UNISTD_H=1 -DWORDS_BIGENDIAN=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1

    -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1

    -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_DIRENT64=1

    -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1

    -DHAVE_DLFCN_H=1 -DSHLIB_SUFFIX=\&quot;.so\&quot;   -I"/usr/local/intercimnc_5.2/TCL/tcl8.3.2/generic"    -O 

    -KPIC -c `echo ./generic/oralob.c` -o oralob.o
    cc -DPACKAGE_NAME=\&quot;Oratcl\&quot; -DPACKAGE_TARNAME=\&quot;oratcl\&quot; -DPACKAGE_VERSION=\&quot;4.4\&quot;

    -DPACKAGE_STRING=\&quot;Oratcl\ 4.4\&quot; -DPACKAGE_BUGREPORT=\&quot;\&quot; -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1

    -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1

    -DHAVE_INTTYPES_H=1 -DHAVE_UNISTD_H=1 -DWORDS_BIGENDIAN=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1

    -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1

    -D_REENTRANT=1 -D_POSIX_PTHREAD_SEMANTICS=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_DIRENT64=1

    -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1

    -DHAVE_DLFCN_H=1 -DSHLIB_SUFFIX=\&quot;.so\&quot;   -I"/usr/local/intercimnc_5.2/TCL/tcl8.3.2/generic"    -O 

    -KPIC -c `echo ./generic/oralong.c` -o oralong.o
    rm -f libOratcl4.4.so
    /usr/ccs/bin/ld -G -z text -o libOratcl4.4.so oratcl.o oralob.o oralong.o -lsocket -lnsl

    -L/usr/local/intercimnc_5.2/TCL/tcl8.3.2/unix -ltclstub8.3
    : libOratcl4.4.so
    (echo 'package ifneeded Oratcl 4.4 \     [list load [file join $dir libOratcl4.4.so]]'\ ) > pkgIndex.tcl

    >>> Make Install output ...
    >>> Make Install output ...
    >>> Make Install output ...

    tclconfig/install-sh -c libOratcl4.4.so /usr/local/intercimnc_5.2/TCL/lib/Oratcl4.4/libOratcl4.4.so
    : /usr/local/intercimnc_5.2/TCL/lib/Oratcl4.4/libOratcl4.4.so
    Install pkgIndex.tcl /usr/local/intercimnc_5.2/TCL/lib/Oratcl4.4
    Installing header files in /usr/local/intercimnc_5.2/TCL/include
    Installing documentation in /usr/local/intercimnc_5.2/TCL/man
    Installing ./doc/oratcl.n

     
    • Todd Helfter

      Todd Helfter - 2007-01-09

      Oratcl 4.4 is not intended for Tcl 8.3 or earlier

       
    • John L. Huber

      John L. Huber - 2007-01-09

      Todd Helfter:

      Hi.  Why then is it advertized as compatible with 8.3??? 
      The table below is in http:/oratcl.sourceforge.net/FAQ.html

      Please refer to the table below when choosing a version of Oratcl:

                                    Oracle Version
                               7.x      8.0.x         8.1+       8.1.7    9i    10g
      Tcl
      Version    Tcl 7.x     Oratcl 2.6 Oratcl 2.6   Oratcl 2.6 Unknown Unknown Unknown
                 Tcl 8.0x    Oratcl 2.6 Oratcl 2.6   Oratcl 2.6 Unknown Unknown Unknown
                 Tcl 8.1-8.2 Oratcl 2.7 Oratcl 3.0.1 Oratcl 3.0.1 Unknown Unknown Unknown
                 Tcl 8.3     Unknown    Oratcl 3.3  Oratcl 4.4 Oratcl 4.4 Oratcl 4.4 Oratcl 4.4
                 Tcl 8.4     Unknown    Oratcl 3.3  Oratcl 4.4 Oratcl 4.4 Oratcl 4.4 Oratcl 4.4
                 Tcl 8.5     Unknown    Oratcl 3.3  Oratcl 4.4 Oratcl 4.4 Oratcl 4.4 Oratcl 4.4

       

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks