Menu
▾
▴
[PATCH 08/18] arch: mips: Remove CONFIG_OPROFILE support
|
From: Viresh K. <vir...@li...> - 2021-01-14 12:02:02
|
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hc...@in...>
Suggested-by: Linus Torvalds <tor...@li...>
Signed-off-by: Viresh Kumar <vir...@li...>
---
arch/mips/Kconfig | 3 +-
arch/mips/Makefile | 1 -
arch/mips/configs/fuloong2e_defconfig | 1 -
arch/mips/configs/ip32_defconfig | 1 -
arch/mips/configs/lemote2f_defconfig | 1 -
arch/mips/configs/mtx1_defconfig | 1 -
arch/mips/configs/rs90_defconfig | 1 -
.../include/asm/mach-loongson2ef/loongson.h | 9 -
arch/mips/loongson2ef/fuloong-2e/irq.c | 2 +-
arch/mips/loongson2ef/lemote-2f/irq.c | 1 -
arch/mips/oprofile/Makefile | 18 -
arch/mips/oprofile/backtrace.c | 177 -------
arch/mips/oprofile/common.c | 147 ------
arch/mips/oprofile/op_impl.h | 41 --
arch/mips/oprofile/op_model_loongson2.c | 161 ------
arch/mips/oprofile/op_model_loongson3.c | 213 --------
arch/mips/oprofile/op_model_mipsxx.c | 479 ------------------
17 files changed, 2 insertions(+), 1255 deletions(-)
delete mode 100644 arch/mips/oprofile/Makefile
delete mode 100644 arch/mips/oprofile/backtrace.c
delete mode 100644 arch/mips/oprofile/common.c
delete mode 100644 arch/mips/oprofile/op_impl.h
delete mode 100644 arch/mips/oprofile/op_model_loongson2.c
delete mode 100644 arch/mips/oprofile/op_model_loongson3.c
delete mode 100644 arch/mips/oprofile/op_model_mipsxx.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..54df2fd9988a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,7 +74,6 @@ config MIPS
select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI
- select HAVE_OPROFILE
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
@@ -2844,7 +2843,7 @@ config NODES_SHIFT
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
+ depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64)
default y
help
Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index cd4343edeb11..f62a6d951d3c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -316,7 +316,6 @@ libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/
core-y += arch/mips/
drivers-y += arch/mips/crypto/
-drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/mips/power/
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 023b4e644b1c..5c24ac7fdf56 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -22,7 +22,6 @@ CONFIG_MIPS32_N32=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
-CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 7b1fab518317..1ae48f7d9ddd 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -14,7 +14,6 @@ CONFIG_SGI_IP32=y
CONFIG_PCI=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
-CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 688c91918db2..aaf9d5e0aa2c 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -21,7 +21,6 @@ CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
-CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bbe0f39f8088..205d3b34528c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -17,7 +17,6 @@ CONFIG_PCCARD=m
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
diff --git a/arch/mips/configs/rs90_defconfig b/arch/mips/configs/rs90_defconfig
index 4f540bb94628..7ce3b814fdc8 100644
--- a/arch/mips/configs/rs90_defconfig
+++ b/arch/mips/configs/rs90_defconfig
@@ -30,7 +30,6 @@ CONFIG_PM=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPUFREQ_DT=y
-CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
# CONFIG_STACKPROTECTOR is not set
# CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index 57e571128489..ca039b8dcde3 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -56,15 +56,6 @@ extern int mach_i8259_irq(void);
(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
#define LOONGSON_IRQ_BASE 32
-#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
-
-#include <linux/interrupt.h>
-static inline void do_perfcnt_IRQ(void)
-{
-#if IS_ENABLED(CONFIG_OPROFILE)
- do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
-}
#define LOONGSON_FLASH_BASE 0x1c000000
#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
diff --git a/arch/mips/loongson2ef/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c
index 305aa2eb74ad..b1c9d4ee0335 100644
--- a/arch/mips/loongson2ef/fuloong-2e/irq.c
+++ b/arch/mips/loongson2ef/fuloong-2e/irq.c
@@ -26,7 +26,7 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
if (pending & CAUSEF_IP7)
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
else if (pending & CAUSEF_IP6) /* perf counter loverflow */
- do_perfcnt_IRQ();
+ return;
else if (pending & CAUSEF_IP5)
i8259_irqdispatch();
else if (pending & CAUSEF_IP2)
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index 6f00579971a3..f5a731a2a35f 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -75,7 +75,6 @@ void mach_irq_dispatch(unsigned int pending)
if (pending & CAUSEF_IP7)
do_IRQ(LOONGSON_TIMER_IRQ);
else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
- do_perfcnt_IRQ();
bonito_irqdispatch();
} else if (pending & CAUSEF_IP3) /* CPU UART */
do_IRQ(LOONGSON_UART_IRQ);
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
deleted file mode 100644
index e10f216d0422..000000000000
--- a/arch/mips/oprofile/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
- oprof.o cpu_buffer.o buffer_sync.o \
- event_buffer.o oprofile_files.o \
- oprofilefs.o oprofile_stats.o \
- timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
-
-oprofile-$(CONFIG_CPU_MIPS32) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_R10000) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_XLR) += op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_LOONGSON2EF) += op_model_loongson2.o
-oprofile-$(CONFIG_CPU_LOONGSON64) += op_model_loongson3.o
diff --git a/arch/mips/oprofile/backtrace.c b/arch/mips/oprofile/backtrace.c
deleted file mode 100644
index 07d98ba7f49e..000000000000
--- a/arch/mips/oprofile/backtrace.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-#include <linux/stacktrace.h>
-#include <linux/kernel.h>
-#include <asm/sections.h>
-#include <asm/inst.h>
-
-struct stackframe {
- unsigned long sp;
- unsigned long pc;
- unsigned long ra;
-};
-
-static inline int get_mem(unsigned long addr, unsigned long *result)
-{
- unsigned long *address = (unsigned long *) addr;
- if (!access_ok(address, sizeof(unsigned long)))
- return -1;
- if (__copy_from_user_inatomic(result, address, sizeof(unsigned long)))
- return -3;
- return 0;
-}
-
-/*
- * These two instruction helpers were taken from process.c
- */
-static inline int is_ra_save_ins(union mips_instruction *ip)
-{
- /* sw / sd $ra, offset($sp) */
- return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op)
- && ip->i_format.rs == 29 && ip->i_format.rt == 31;
-}
-
-static inline int is_sp_move_ins(union mips_instruction *ip)
-{
- /* addiu/daddiu sp,sp,-imm */
- if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
- return 0;
- if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
- return 1;
- return 0;
-}
-
-/*
- * Looks for specific instructions that mark the end of a function.
- * This usually means we ran into the code area of the previous function.
- */
-static inline int is_end_of_function_marker(union mips_instruction *ip)
-{
- /* jr ra */
- if (ip->r_format.func == jr_op && ip->r_format.rs == 31)
- return 1;
- /* lui gp */
- if (ip->i_format.opcode == lui_op && ip->i_format.rt == 28)
- return 1;
- return 0;
-}
-
-/*
- * TODO for userspace stack unwinding:
- * - handle cases where the stack is adjusted inside a function
- * (generally doesn't happen)
- * - find optimal value for max_instr_check
- * - try to find a better way to handle leaf functions
- */
-
-static inline int unwind_user_frame(struct stackframe *old_frame,
- const unsigned int max_instr_check)
-{
- struct stackframe new_frame = *old_frame;
- off_t ra_offset = 0;
- size_t stack_size = 0;
- unsigned long addr;
-
- if (old_frame->pc == 0 || old_frame->sp == 0 || old_frame->ra == 0)
- return -9;
-
- for (addr = new_frame.pc; (addr + max_instr_check > new_frame.pc)
- && (!ra_offset || !stack_size); --addr) {
- union mips_instruction ip;
-
- if (get_mem(addr, (unsigned long *) &ip))
- return -11;
-
- if (is_sp_move_ins(&ip)) {
- int stack_adjustment = ip.i_format.simmediate;
- if (stack_adjustment > 0)
- /* This marks the end of the previous function,
- which means we overran. */
- break;
- stack_size = (unsigned long) stack_adjustment;
- } else if (is_ra_save_ins(&ip)) {
- int ra_slot = ip.i_format.simmediate;
- if (ra_slot < 0)
- /* This shouldn't happen. */
- break;
- ra_offset = ra_slot;
- } else if (is_end_of_function_marker(&ip))
- break;
- }
-
- if (!ra_offset || !stack_size)
- goto done;
-
- if (ra_offset) {
- new_frame.ra = old_frame->sp + ra_offset;
- if (get_mem(new_frame.ra, &(new_frame.ra)))
- return -13;
- }
-
- if (stack_size) {
- new_frame.sp = old_frame->sp + stack_size;
- if (get_mem(new_frame.sp, &(new_frame.sp)))
- return -14;
- }
-
- if (new_frame.sp > old_frame->sp)
- return -2;
-
-done:
- new_frame.pc = old_frame->ra;
- *old_frame = new_frame;
-
- return 0;
-}
-
-static inline void do_user_backtrace(unsigned long low_addr,
- struct stackframe *frame,
- unsigned int depth)
-{
- const unsigned int max_instr_check = 512;
- const unsigned long high_addr = low_addr + THREAD_SIZE;
-
- while (depth-- && !unwind_user_frame(frame, max_instr_check)) {
- oprofile_add_trace(frame->ra);
- if (frame->sp < low_addr || frame->sp > high_addr)
- break;
- }
-}
-
-#ifndef CONFIG_KALLSYMS
-static inline void do_kernel_backtrace(unsigned long low_addr,
- struct stackframe *frame,
- unsigned int depth) { }
-#else
-static inline void do_kernel_backtrace(unsigned long low_addr,
- struct stackframe *frame,
- unsigned int depth)
-{
- while (depth-- && frame->pc) {
- frame->pc = unwind_stack_by_address(low_addr,
- &(frame->sp),
- frame->pc,
- &(frame->ra));
- oprofile_add_trace(frame->ra);
- }
-}
-#endif
-
-void notrace op_mips_backtrace(struct pt_regs *const regs, unsigned int depth)
-{
- struct stackframe frame = { .sp = regs->regs[29],
- .pc = regs->cp0_epc,
- .ra = regs->regs[31] };
- const int userspace = user_mode(regs);
- const unsigned long low_addr = ALIGN(frame.sp, THREAD_SIZE);
-
- if (userspace)
- do_user_backtrace(low_addr, &frame, depth);
- else
- do_kernel_backtrace(low_addr, &frame, depth);
-}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
deleted file mode 100644
index d3996c4c6440..000000000000
--- a/arch/mips/oprofile/common.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 Ralf Baechle
- * Copyright (C) 2005 MIPS Technologies, Inc.
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/cpu-info.h>
-#include <asm/cpu-type.h>
-
-#include "op_impl.h"
-
-extern struct op_mips_model op_model_mipsxx_ops __weak;
-extern struct op_mips_model op_model_loongson2_ops __weak;
-extern struct op_mips_model op_model_loongson3_ops __weak;
-
-static struct op_mips_model *model;
-
-static struct op_counter_config ctr[20];
-
-static int op_mips_setup(void)
-{
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr);
-
- /* Configure the registers on all cpus. */
- on_each_cpu(model->cpu_setup, NULL, 1);
-
- return 0;
-}
-
-static int op_mips_create_files(struct dentry *root)
-{
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[4];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(root, buf);
-
- oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(dir, "count", &ctr[i].count);
- oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(dir, "user", &ctr[i].user);
- oprofilefs_create_ulong(dir, "exl", &ctr[i].exl);
- /* Dummy. */
- oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- return 0;
-}
-
-static int op_mips_start(void)
-{
- on_each_cpu(model->cpu_start, NULL, 1);
-
- return 0;
-}
-
-static void op_mips_stop(void)
-{
- /* Disable performance monitoring for all counters. */
- on_each_cpu(model->cpu_stop, NULL, 1);
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- struct op_mips_model *lmodel = NULL;
- int res;
-
- switch (boot_cpu_type()) {
- case CPU_5KC:
- case CPU_M14KC:
- case CPU_M14KEC:
- case CPU_20KC:
- case CPU_24K:
- case CPU_25KF:
- case CPU_34K:
- case CPU_1004K:
- case CPU_74K:
- case CPU_1074K:
- case CPU_INTERAPTIV:
- case CPU_PROAPTIV:
- case CPU_P5600:
- case CPU_I6400:
- case CPU_M5150:
- case CPU_LOONGSON32:
- case CPU_SB1:
- case CPU_SB1A:
- case CPU_R10000:
- case CPU_R12000:
- case CPU_R14000:
- case CPU_R16000:
- case CPU_XLR:
- lmodel = &op_model_mipsxx_ops;
- break;
-
- case CPU_LOONGSON2EF:
- lmodel = &op_model_loongson2_ops;
- break;
- case CPU_LOONGSON64:
- lmodel = &op_model_loongson3_ops;
- break;
- }
-
- /*
- * Always set the backtrace. This allows unsupported CPU types to still
- * use timer-based oprofile.
- */
- ops->backtrace = op_mips_backtrace;
-
- if (!lmodel)
- return -ENODEV;
-
- res = lmodel->init();
- if (res)
- return res;
-
- model = lmodel;
-
- ops->create_files = op_mips_create_files;
- ops->setup = op_mips_setup;
- //ops->shutdown = op_mips_shutdown;
- ops->start = op_mips_start;
- ops->stop = op_mips_stop;
- ops->cpu_type = lmodel->cpu_type;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- lmodel->cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
- if (model)
- model->exit();
-}
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
deleted file mode 100644
index a4e758a39af4..000000000000
--- a/arch/mips/oprofile/op_impl.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rt...@tw...>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-extern int (*perf_irq)(void);
-
-/* Per-counter configuration as set via oprofilefs. */
-struct op_counter_config {
- unsigned long enabled;
- unsigned long event;
- unsigned long count;
- /* Dummies because I am too lazy to hack the userspace tools. */
- unsigned long kernel;
- unsigned long user;
- unsigned long exl;
- unsigned long unit_mask;
-};
-
-/* Per-architecture configure and hooks. */
-struct op_mips_model {
- void (*reg_setup) (struct op_counter_config *);
- void (*cpu_setup) (void *dummy);
- int (*init)(void);
- void (*exit)(void);
- void (*cpu_start)(void *args);
- void (*cpu_stop)(void *args);
- char *cpu_type;
- unsigned char num_counters;
-};
-
-void op_mips_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
deleted file mode 100644
index b249ec0bebb2..000000000000
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Loongson2 performance counter driver for oprofile
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Yanhua <ya...@le...>
- * Author: Wu Zhangjin <wuz...@gm...>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-
-#include <loongson.h> /* LOONGSON2_PERFCNT_IRQ */
-#include "op_impl.h"
-
-#define LOONGSON2_CPU_TYPE "mips/loongson2"
-
-#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31)
-
-#define LOONGSON2_PERFCTRL_EXL (1UL << 0)
-#define LOONGSON2_PERFCTRL_KERNEL (1UL << 1)
-#define LOONGSON2_PERFCTRL_SUPERVISOR (1UL << 2)
-#define LOONGSON2_PERFCTRL_USER (1UL << 3)
-#define LOONGSON2_PERFCTRL_ENABLE (1UL << 4)
-#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
- (((event) & 0x0f) << ((idx) ? 9 : 5))
-
-#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
-#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
-#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
-#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
-
-static struct loongson2_register_config {
- unsigned int ctrl;
- unsigned long long reset_counter1;
- unsigned long long reset_counter2;
- int cnt1_enabled, cnt2_enabled;
-} reg;
-
-static char *oprofid = "LoongsonPerf";
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-
-static void reset_counters(void *arg)
-{
- write_c0_perfctrl(0);
- write_c0_perfcnt(0);
-}
-
-static void loongson2_reg_setup(struct op_counter_config *cfg)
-{
- unsigned int ctrl = 0;
-
- reg.reset_counter1 = 0;
- reg.reset_counter2 = 0;
-
- /*
- * Compute the performance counter ctrl word.
- * For now, count kernel and user mode.
- */
- if (cfg[0].enabled) {
- ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
- reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
- }
-
- if (cfg[1].enabled) {
- ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
- reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
- }
-
- if (cfg[0].enabled || cfg[1].enabled) {
- ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
- if (cfg[0].kernel || cfg[1].kernel)
- ctrl |= LOONGSON2_PERFCTRL_KERNEL;
- if (cfg[0].user || cfg[1].user)
- ctrl |= LOONGSON2_PERFCTRL_USER;
- }
-
- reg.ctrl = ctrl;
-
- reg.cnt1_enabled = cfg[0].enabled;
- reg.cnt2_enabled = cfg[1].enabled;
-}
-
-static void loongson2_cpu_setup(void *args)
-{
- write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
-}
-
-static void loongson2_cpu_start(void *args)
-{
- /* Start all counters on current CPU */
- if (reg.cnt1_enabled || reg.cnt2_enabled)
- write_c0_perfctrl(reg.ctrl);
-}
-
-static void loongson2_cpu_stop(void *args)
-{
- /* Stop all counters on current CPU */
- write_c0_perfctrl(0);
- memset(®, 0, sizeof(reg));
-}
-
-static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
-{
- uint64_t counter, counter1, counter2;
- struct pt_regs *regs = get_irq_regs();
- int enabled;
-
- /* Check whether the irq belongs to me */
- enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
- if (!enabled)
- return IRQ_NONE;
- enabled = reg.cnt1_enabled | reg.cnt2_enabled;
- if (!enabled)
- return IRQ_NONE;
-
- counter = read_c0_perfcnt();
- counter1 = counter & 0xffffffff;
- counter2 = counter >> 32;
-
- if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
- if (reg.cnt1_enabled)
- oprofile_add_sample(regs, 0);
- counter1 = reg.reset_counter1;
- }
- if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
- if (reg.cnt2_enabled)
- oprofile_add_sample(regs, 1);
- counter2 = reg.reset_counter2;
- }
-
- write_c0_perfcnt((counter2 << 32) | counter1);
-
- return IRQ_HANDLED;
-}
-
-static int __init loongson2_init(void)
-{
- return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
- IRQF_SHARED, "Perfcounter", oprofid);
-}
-
-static void loongson2_exit(void)
-{
- reset_counters(NULL);
- free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
-}
-
-struct op_mips_model op_model_loongson2_ops = {
- .reg_setup = loongson2_reg_setup,
- .cpu_setup = loongson2_cpu_setup,
- .init = loongson2_init,
- .exit = loongson2_exit,
- .cpu_start = loongson2_cpu_start,
- .cpu_stop = loongson2_cpu_stop,
- .cpu_type = LOONGSON2_CPU_TYPE,
- .num_counters = 2
-};
diff --git a/arch/mips/oprofile/op_model_loongson3.c b/arch/mips/oprofile/op_model_loongson3.c
deleted file mode 100644
index 436b1fc99f2c..000000000000
--- a/arch/mips/oprofile/op_model_loongson3.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/proc_fs.h>
-#include <linux/oprofile.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <irq.h>
-#include <loongson.h>
-#include "op_impl.h"
-
-#define LOONGSON3_PERFCNT_OVERFLOW (1ULL << 63)
-
-#define LOONGSON3_PERFCTRL_EXL (1UL << 0)
-#define LOONGSON3_PERFCTRL_KERNEL (1UL << 1)
-#define LOONGSON3_PERFCTRL_SUPERVISOR (1UL << 2)
-#define LOONGSON3_PERFCTRL_USER (1UL << 3)
-#define LOONGSON3_PERFCTRL_ENABLE (1UL << 4)
-#define LOONGSON3_PERFCTRL_W (1UL << 30)
-#define LOONGSON3_PERFCTRL_M (1UL << 31)
-#define LOONGSON3_PERFCTRL_EVENT(idx, event) \
- (((event) & (idx ? 0x0f : 0x3f)) << 5)
-
-/* Loongson-3 PerfCount performance counter1 register */
-#define read_c0_perflo1() __read_64bit_c0_register($25, 0)
-#define write_c0_perflo1(val) __write_64bit_c0_register($25, 0, val)
-#define read_c0_perfhi1() __read_64bit_c0_register($25, 1)
-#define write_c0_perfhi1(val) __write_64bit_c0_register($25, 1, val)
-
-/* Loongson-3 PerfCount performance counter2 register */
-#define read_c0_perflo2() __read_64bit_c0_register($25, 2)
-#define write_c0_perflo2(val) __write_64bit_c0_register($25, 2, val)
-#define read_c0_perfhi2() __read_64bit_c0_register($25, 3)
-#define write_c0_perfhi2(val) __write_64bit_c0_register($25, 3, val)
-
-static int (*save_perf_irq)(void);
-
-static struct loongson3_register_config {
- unsigned int control1;
- unsigned int control2;
- unsigned long long reset_counter1;
- unsigned long long reset_counter2;
- int ctr1_enable, ctr2_enable;
-} reg;
-
-static void reset_counters(void *arg)
-{
- write_c0_perfhi1(0);
- write_c0_perfhi2(0);
- write_c0_perflo1(0xc0000000);
- write_c0_perflo2(0x40000000);
-}
-
-/* Compute all of the registers in preparation for enabling profiling. */
-static void loongson3_reg_setup(struct op_counter_config *ctr)
-{
- unsigned int control1 = 0;
- unsigned int control2 = 0;
-
- reg.reset_counter1 = 0;
- reg.reset_counter2 = 0;
- /* Compute the performance counter control word. */
- /* For now count kernel and user mode */
- if (ctr[0].enabled) {
- control1 |= LOONGSON3_PERFCTRL_EVENT(0, ctr[0].event) |
- LOONGSON3_PERFCTRL_ENABLE;
- if (ctr[0].kernel)
- control1 |= LOONGSON3_PERFCTRL_KERNEL;
- if (ctr[0].user)
- control1 |= LOONGSON3_PERFCTRL_USER;
- reg.reset_counter1 = 0x8000000000000000ULL - ctr[0].count;
- }
-
- if (ctr[1].enabled) {
- control2 |= LOONGSON3_PERFCTRL_EVENT(1, ctr[1].event) |
- LOONGSON3_PERFCTRL_ENABLE;
- if (ctr[1].kernel)
- control2 |= LOONGSON3_PERFCTRL_KERNEL;
- if (ctr[1].user)
- control2 |= LOONGSON3_PERFCTRL_USER;
- reg.reset_counter2 = 0x8000000000000000ULL - ctr[1].count;
- }
-
- if (ctr[0].enabled)
- control1 |= LOONGSON3_PERFCTRL_EXL;
- if (ctr[1].enabled)
- control2 |= LOONGSON3_PERFCTRL_EXL;
-
- reg.control1 = control1;
- reg.control2 = control2;
- reg.ctr1_enable = ctr[0].enabled;
- reg.ctr2_enable = ctr[1].enabled;
-}
-
-/* Program all of the registers in preparation for enabling profiling. */
-static void loongson3_cpu_setup(void *args)
-{
- uint64_t perfcount1, perfcount2;
-
- perfcount1 = reg.reset_counter1;
- perfcount2 = reg.reset_counter2;
- write_c0_perfhi1(perfcount1);
- write_c0_perfhi2(perfcount2);
-}
-
-static void loongson3_cpu_start(void *args)
-{
- /* Start all counters on current CPU */
- reg.control1 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
- reg.control2 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
-
- if (reg.ctr1_enable)
- write_c0_perflo1(reg.control1);
- if (reg.ctr2_enable)
- write_c0_perflo2(reg.control2);
-}
-
-static void loongson3_cpu_stop(void *args)
-{
- /* Stop all counters on current CPU */
- write_c0_perflo1(0xc0000000);
- write_c0_perflo2(0x40000000);
- memset(®, 0, sizeof(reg));
-}
-
-static int loongson3_perfcount_handler(void)
-{
- unsigned long flags;
- uint64_t counter1, counter2;
- uint32_t cause, handled = IRQ_NONE;
- struct pt_regs *regs = get_irq_regs();
-
- cause = read_c0_cause();
- if (!(cause & CAUSEF_PCI))
- return handled;
-
- counter1 = read_c0_perfhi1();
- counter2 = read_c0_perfhi2();
-
- local_irq_save(flags);
-
- if (counter1 & LOONGSON3_PERFCNT_OVERFLOW) {
- if (reg.ctr1_enable)
- oprofile_add_sample(regs, 0);
- counter1 = reg.reset_counter1;
- }
- if (counter2 & LOONGSON3_PERFCNT_OVERFLOW) {
- if (reg.ctr2_enable)
- oprofile_add_sample(regs, 1);
- counter2 = reg.reset_counter2;
- }
-
- local_irq_restore(flags);
-
- write_c0_perfhi1(counter1);
- write_c0_perfhi2(counter2);
-
- if (!(cause & CAUSEF_TI))
- handled = IRQ_HANDLED;
-
- return handled;
-}
-
-static int loongson3_starting_cpu(unsigned int cpu)
-{
- write_c0_perflo1(reg.control1);
- write_c0_perflo2(reg.control2);
- return 0;
-}
-
-static int loongson3_dying_cpu(unsigned int cpu)
-{
- write_c0_perflo1(0xc0000000);
- write_c0_perflo2(0x40000000);
- return 0;
-}
-
-static int __init loongson3_init(void)
-{
- on_each_cpu(reset_counters, NULL, 1);
- cpuhp_setup_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING,
- "mips/oprofile/loongson3:starting",
- loongson3_starting_cpu, loongson3_dying_cpu);
- save_perf_irq = perf_irq;
- perf_irq = loongson3_perfcount_handler;
-
- return 0;
-}
-
-static void loongson3_exit(void)
-{
- on_each_cpu(reset_counters, NULL, 1);
- cpuhp_remove_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING);
- perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_loongson3_ops = {
- .reg_setup = loongson3_reg_setup,
- .cpu_setup = loongson3_cpu_setup,
- .init = loongson3_init,
- .exit = loongson3_exit,
- .cpu_start = loongson3_cpu_start,
- .cpu_stop = loongson3_cpu_stop,
- .cpu_type = "mips/loongson3",
- .num_counters = 2
-};
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
deleted file mode 100644
index 55d7b7fd18b6..000000000000
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 05, 06 by Ralf Baechle
- * Copyright (C) 2005 by MIPS Technologies, Inc.
- */
-#include <linux/cpumask.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <asm/irq_regs.h>
-#include <asm/time.h>
-
-#include "op_impl.h"
-
-#define M_PERFCTL_EVENT(event) (((event) << MIPS_PERFCTRL_EVENT_S) & \
- MIPS_PERFCTRL_EVENT)
-#define M_PERFCTL_VPEID(vpe) ((vpe) << MIPS_PERFCTRL_VPEID_S)
-
-#define M_COUNTER_OVERFLOW (1UL << 31)
-
-static int (*save_perf_irq)(void);
-static int perfcount_irq;
-
-/*
- * XLR has only one set of counters per core. Designate the
- * first hardware thread in the core for setup and init.
- * Skip CPUs with non-zero hardware thread id (4 hwt per core)
- */
-#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP)
-#define oprofile_skip_cpu(c) ((cpu_logical_map(c) & 0x3) != 0)
-#else
-#define oprofile_skip_cpu(c) 0
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMP
-#define WHAT (MIPS_PERFCTRL_MT_EN_VPE | \
- M_PERFCTL_VPEID(cpu_vpe_id(¤t_cpu_data)))
-#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
- 0 : cpu_vpe_id(¤t_cpu_data))
-
-/*
- * The number of bits to shift to convert between counters per core and
- * counters per VPE. There is no reasonable interface atm to obtain the
- * number of VPEs used by Linux and in the 34K this number is fixed to two
- * anyways so we hardcore a few things here for the moment. The way it's
- * done here will ensure that oprofile VSMP kernel will run right on a lesser
- * core like a 24K also or with maxcpus=1.
- */
-static inline unsigned int vpe_shift(void)
-{
- if (num_possible_cpus() > 1)
- return 1;
-
- return 0;
-}
-
-#else
-
-#define WHAT 0
-#define vpe_id() 0
-
-static inline unsigned int vpe_shift(void)
-{
- return 0;
-}
-
-#endif
-
-static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
-{
- return counters >> vpe_shift();
-}
-
-static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
- return counters << vpe_shift();
-}
-
-#define __define_perf_accessors(r, n, np) \
- \
-static inline unsigned int r_c0_ ## r ## n(void) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- return read_c0_ ## r ## n(); \
- case 1: \
- return read_c0_ ## r ## np(); \
- default: \
- BUG(); \
- } \
- return 0; \
-} \
- \
-static inline void w_c0_ ## r ## n(unsigned int value) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- write_c0_ ## r ## n(value); \
- return; \
- case 1: \
- write_c0_ ## r ## np(value); \
- return; \
- default: \
- BUG(); \
- } \
- return; \
-} \
-
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
-
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
-
-struct op_mips_model op_model_mipsxx_ops;
-
-static struct mipsxx_register_config {
- unsigned int control[4];
- unsigned int counter[4];
-} reg;
-
-/* Compute all of the registers in preparation for enabling profiling. */
-
-static void mipsxx_reg_setup(struct op_counter_config *ctr)
-{
- unsigned int counters = op_model_mipsxx_ops.num_counters;
- int i;
-
- /* Compute the performance counter control word. */
- for (i = 0; i < counters; i++) {
- reg.control[i] = 0;
- reg.counter[i] = 0;
-
- if (!ctr[i].enabled)
- continue;
-
- reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
- MIPS_PERFCTRL_IE;
- if (ctr[i].kernel)
- reg.control[i] |= MIPS_PERFCTRL_K;
- if (ctr[i].user)
- reg.control[i] |= MIPS_PERFCTRL_U;
- if (ctr[i].exl)
- reg.control[i] |= MIPS_PERFCTRL_EXL;
- if (boot_cpu_type() == CPU_XLR)
- reg.control[i] |= XLR_PERFCTRL_ALLTHREADS;
- reg.counter[i] = 0x80000000 - ctr[i].count;
- }
-}
-
-/* Program all of the registers in preparation for enabling profiling. */
-
-static void mipsxx_cpu_setup(void *args)
-{
- unsigned int counters = op_model_mipsxx_ops.num_counters;
-
- if (oprofile_skip_cpu(smp_processor_id()))
- return;
-
- switch (counters) {
- case 4:
- w_c0_perfctrl3(0);
- w_c0_perfcntr3(reg.counter[3]);
- fallthrough;
- case 3:
- w_c0_perfctrl2(0);
- w_c0_perfcntr2(reg.counter[2]);
- fallthrough;
- case 2:
- w_c0_perfctrl1(0);
- w_c0_perfcntr1(reg.counter[1]);
- fallthrough;
- case 1:
- w_c0_perfctrl0(0);
- w_c0_perfcntr0(reg.counter[0]);
- }
-}
-
-/* Start all counters on current CPU */
-static void mipsxx_cpu_start(void *args)
-{
- unsigned int counters = op_model_mipsxx_ops.num_counters;
-
- if (oprofile_skip_cpu(smp_processor_id()))
- return;
-
- switch (counters) {
- case 4:
- w_c0_perfctrl3(WHAT | reg.control[3]);
- fallthrough;
- case 3:
- w_c0_perfctrl2(WHAT | reg.control[2]);
- fallthrough;
- case 2:
- w_c0_perfctrl1(WHAT | reg.control[1]);
- fallthrough;
- case 1:
- w_c0_perfctrl0(WHAT | reg.control[0]);
- }
-}
-
-/* Stop all counters on current CPU */
-static void mipsxx_cpu_stop(void *args)
-{
- unsigned int counters = op_model_mipsxx_ops.num_counters;
-
- if (oprofile_skip_cpu(smp_processor_id()))
- return;
-
- switch (counters) {
- case 4:
- w_c0_perfctrl3(0);
- fallthrough;
- case 3:
- w_c0_perfctrl2(0);
- fallthrough;
- case 2:
- w_c0_perfctrl1(0);
- fallthrough;
- case 1:
- w_c0_perfctrl0(0);
- }
-}
-
-static int mipsxx_perfcount_handler(void)
-{
- unsigned int counters = op_model_mipsxx_ops.num_counters;
- unsigned int control;
- unsigned int counter;
- int handled = IRQ_NONE;
-
- if (cpu_has_mips_r2 && !(read_c0_cause() & CAUSEF_PCI))
- return handled;
-
- switch (counters) {
-#define HANDLE_COUNTER(n) \
- case n + 1: \
- control = r_c0_perfctrl ## n(); \
- counter = r_c0_perfcntr ## n(); \
- if ((control & MIPS_PERFCTRL_IE) && \
- (counter & M_COUNTER_OVERFLOW)) { \
- oprofile_add_sample(get_irq_regs(), n); \
- w_c0_perfcntr ## n(reg.counter[n]); \
- handled = IRQ_HANDLED; \
- }
- HANDLE_COUNTER(3)
- fallthrough;
- HANDLE_COUNTER(2)
- fallthrough;
- HANDLE_COUNTER(1)
- fallthrough;
- HANDLE_COUNTER(0)
- }
-
- return handled;
-}
-
-static inline int __n_counters(void)
-{
- if (!cpu_has_perf)
- return 0;
- if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
- return 1;
- if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
- return 2;
- if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
- return 3;
-
- return 4;
-}
-
-static inline int n_counters(void)
-{
- int counters;
-
- switch (current_cpu_type()) {
- case CPU_R10000:
- counters = 2;
- break;
-
- case CPU_R12000:
- case CPU_R14000:
- case CPU_R16000:
- counters = 4;
- break;
-
- default:
- counters = __n_counters();
- }
-
- return counters;
-}
-
-static void reset_counters(void *arg)
-{
- int counters = (int)(long)arg;
- switch (counters) {
- case 4:
- w_c0_perfctrl3(0);
- w_c0_perfcntr3(0);
- fallthrough;
- case 3:
- w_c0_perfctrl2(0);
- w_c0_perfcntr2(0);
- fallthrough;
- case 2:
- w_c0_perfctrl1(0);
- w_c0_perfcntr1(0);
- fallthrough;
- case 1:
- w_c0_perfctrl0(0);
- w_c0_perfcntr0(0);
- }
-}
-
-static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
-{
- return mipsxx_perfcount_handler();
-}
-
-static int __init mipsxx_init(void)
-{
- int counters;
-
- counters = n_counters();
- if (counters == 0) {
- printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
- return -ENODEV;
- }
-
-#ifdef CONFIG_MIPS_MT_SMP
- if (!cpu_has_mipsmt_pertccounters)
- counters = counters_total_to_per_cpu(counters);
-#endif
- on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
- op_model_mipsxx_ops.num_counters = counters;
- switch (current_cpu_type()) {
- case CPU_M14KC:
- op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
- break;
-
- case CPU_M14KEC:
- op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
- break;
-
- case CPU_20KC:
- op_model_mipsxx_ops.cpu_type = "mips/20K";
- break;
-
- case CPU_24K:
- op_model_mipsxx_ops.cpu_type = "mips/24K";
- break;
-
- case CPU_25KF:
- op_model_mipsxx_ops.cpu_type = "mips/25K";
- break;
-
- case CPU_1004K:
- case CPU_34K:
- op_model_mipsxx_ops.cpu_type = "mips/34K";
- break;
-
- case CPU_1074K:
- case CPU_74K:
- op_model_mipsxx_ops.cpu_type = "mips/74K";
- break;
-
- case CPU_INTERAPTIV:
- op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
- break;
-
- case CPU_PROAPTIV:
- op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
- break;
-
- case CPU_P5600:
- op_model_mipsxx_ops.cpu_type = "mips/P5600";
- break;
-
- case CPU_I6400:
- op_model_mipsxx_ops.cpu_type = "mips/I6400";
- break;
-
- case CPU_M5150:
- op_model_mipsxx_ops.cpu_type = "mips/M5150";
- break;
-
- case CPU_5KC:
- op_model_mipsxx_ops.cpu_type = "mips/5K";
- break;
-
- case CPU_R10000:
- if ((current_cpu_data.processor_id & 0xff) == 0x20)
- op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
- else
- op_model_mipsxx_ops.cpu_type = "mips/r10000";
- break;
-
- case CPU_R12000:
- case CPU_R14000:
- op_model_mipsxx_ops.cpu_type = "mips/r12000";
- break;
-
- case CPU_R16000:
- op_model_mipsxx_ops.cpu_type = "mips/r16000";
- break;
-
- case CPU_SB1:
- case CPU_SB1A:
- op_model_mipsxx_ops.cpu_type = "mips/sb1";
- break;
-
- case CPU_LOONGSON32:
- op_model_mipsxx_ops.cpu_type = "mips/loongson1";
- break;
-
- case CPU_XLR:
- op_model_mipsxx_ops.cpu_type = "mips/xlr";
- break;
-
- default:
- printk(KERN_ERR "Profiling unsupported for this CPU\n");
-
- return -ENODEV;
- }
-
- save_perf_irq = perf_irq;
- perf_irq = mipsxx_perfcount_handler;
-
- if (get_c0_perfcount_int)
- perfcount_irq = get_c0_perfcount_int();
- else if (cp0_perfcount_irq >= 0)
- perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- else
- perfcount_irq = -1;
-
- if (perfcount_irq >= 0)
- return request_irq(perfcount_irq, mipsxx_perfcount_int,
- IRQF_PERCPU | IRQF_NOBALANCING |
- IRQF_NO_THREAD | IRQF_NO_SUSPEND |
- IRQF_SHARED,
- "Perfcounter", save_perf_irq);
-
- return 0;
-}
-
-static void mipsxx_exit(void)
-{
- int counters = op_model_mipsxx_ops.num_counters;
-
- if (perfcount_irq >= 0)
- free_irq(perfcount_irq, save_perf_irq);
-
- counters = counters_per_cpu_to_total(counters);
- on_each_cpu(reset_counters, (void *)(long)counters, 1);
-
- perf_irq = save_perf_irq;
-}
-
-struct op_mips_model op_model_mipsxx_ops = {
- .reg_setup = mipsxx_reg_setup,
- .cpu_setup = mipsxx_cpu_setup,
- .init = mipsxx_init,
- .exit = mipsxx_exit,
- .cpu_start = mipsxx_cpu_start,
- .cpu_stop = mipsxx_cpu_stop,
-};
--
2.25.0.rc1.19.g042ed3e048af
|