Menu
▾
▴
openvpn-devel
|
From: mattock (C. Review) <ge...@op...> - 2025-03-26 12:51:55
|
Attention is currently required from: flichtenheld, plaisthos.
Hello plaisthos, flichtenheld,
I'd like you to do a code review.
Please visit
http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
to review the following change.
Change subject: t_server_null: add multi-socket testing
......................................................................
t_server_null: add multi-socket testing
This makes the first server instance listen on both 127.0.0.1 and ::1
and adds a client that connects to the latter.
Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Signed-off-by: Samuli Seppänen <sam...@gm...>
---
M tests/t_server_null_default.rc
1 file changed, 11 insertions(+), 6 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/19/919/1
diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc
index e7bf5bc..0775192 100755
--- a/tests/t_server_null_default.rc
+++ b/tests/t_server_null_default.rc
@@ -48,7 +48,7 @@
SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0"
SERVER_MGMT_PORT_1="11194"
SERVER_EXEC_1="${SERVER_EXEC}"
-SERVER_CONF_1="${SERVER_CONF_BASE} ${SERVER_SERVER_1} --lport 1194 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_1}"
+SERVER_CONF_1="${SERVER_CONF_BASE} ${SERVER_SERVER_1} --local ::1 --lport 1194 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_1}"
SERVER_NAME_2="t_server_null_server-1195_tcp"
SERVER_SERVER_2="--server 10.29.42.0 255.255.255.0"
@@ -65,14 +65,19 @@
CLIENT_CIPHER_OPTS=""
CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1"
-TEST_RUN_LIST="1 1L 2 2L 3"
+TEST_RUN_LIST="1a 1b 1L 2 2L 3"
CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
-TEST_NAME_1="t_server_null_client.sh-openvpn_current_udp"
-SHOULD_PASS_1="yes"
-CLIENT_EXEC_1="${CLIENT_EXEC}"
-CLIENT_CONF_1="${CLIENT_CONF_BASE} --remote 127.0.0.1 1194 udp --proto udp"
+TEST_NAME_1a="t_server_null_client.sh-openvpn_current_udp_ipv4_remote"
+SHOULD_PASS_1a="yes"
+CLIENT_EXEC_1a="${CLIENT_EXEC}"
+CLIENT_CONF_1a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1194 udp --proto udp"
+
+TEST_NAME_1b="t_server_null_client.sh-openvpn_current_udp_ipv6_remote"
+SHOULD_PASS_1b="yes"
+CLIENT_EXEC_1b="${CLIENT_EXEC}"
+CLIENT_CONF_1b="${CLIENT_CONF_BASE} --remote ::1 1194 udp --proto udp"
TEST_NAME_1L="t_server_null_client.sh-openvpn_current_udp_lwip"
SHOULD_PASS_1L="yes"
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Gerrit-Change-Number: 919
Gerrit-PatchSet: 1
Gerrit-Owner: mattock <sa...@pr...>
Gerrit-Reviewer: flichtenheld <fr...@li...>
Gerrit-Reviewer: plaisthos <arn...@rf...>
Gerrit-CC: openvpn-devel <ope...@li...>
Gerrit-Attention: plaisthos <arn...@rf...>
Gerrit-Attention: flichtenheld <fr...@li...>
Gerrit-MessageType: newchange
|
|
From: mattock (C. Review) <ge...@op...> - 2025-03-27 13:44:06
|
Attention is currently required from: flichtenheld, plaisthos.
Hello flichtenheld, plaisthos,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
to look at the new patch set (#2).
Change subject: t_server_null: add multi-socket testing
......................................................................
t_server_null: add multi-socket testing
This adds a new multi-socket server that listens on IPv4 and IPv6
localhost addresses for TCP and UDP connections respectively. It also
adds two success tests and one failure test with wrong protocol defined
at the client side.
Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Signed-off-by: Samuli Seppänen <sam...@gm...>
---
M tests/t_server_null_default.rc
1 file changed, 27 insertions(+), 4 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/19/919/2
diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc
index e7bf5bc..d1abad2 100755
--- a/tests/t_server_null_default.rc
+++ b/tests/t_server_null_default.rc
@@ -37,12 +37,14 @@
MAX_CLIENTS="10"
CLIENT_MATCH="Test-Client"
SERVER_EXEC="${top_builddir}/src/openvpn/openvpn"
-SERVER_BASE_OPTS="--daemon --local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BASE_OPTS="--daemon --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BIND_OPTS="--local 127.0.0.1"
SERVER_CIPHER_OPTS=""
SERVER_CERT_OPTS="--ca ${CA} --dh ${DH} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0"
-SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
+SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}"
+SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
-TEST_SERVER_LIST="1 2"
+TEST_SERVER_LIST="1 2 4"
SERVER_NAME_1="t_server_null_server-1194_udp"
SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0"
@@ -56,6 +58,12 @@
SERVER_EXEC_2="${SERVER_EXEC}"
SERVER_CONF_2="${SERVER_CONF_BASE} ${SERVER_SERVER_2} --lport 1195 --proto tcp --management 127.0.0.1 ${SERVER_MGMT_PORT_2}"
+SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6"
+SERVER_SERVER_4="--server 10.29.43.0 255.255.255.0"
+SERVER_MGMT_PORT_4="11197"
+SERVER_EXEC_4="${SERVER_EXEC}"
+SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}"
+
# Test client configurations
CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn"
CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2"
@@ -65,7 +73,7 @@
CLIENT_CIPHER_OPTS=""
CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1"
-TEST_RUN_LIST="1 1L 2 2L 3"
+TEST_RUN_LIST="1 1L 2 2L 3 5a 5b 5c"
CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
@@ -93,3 +101,18 @@
SHOULD_PASS_3="no"
CLIENT_EXEC_3="${CLIENT_EXEC}"
CLIENT_CONF_3="${CLIENT_CONF_BASE} --remote 127.0.0.1 11194 udp --proto udp"
+
+TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp"
+SHOULD_PASS_5a="yes"
+CLIENT_EXEC_5a="${CLIENT_EXEC}"
+CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp"
+
+TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp"
+SHOULD_PASS_5b="yes"
+CLIENT_EXEC_5b="${CLIENT_EXEC}"
+CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp"
+
+TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail"
+SHOULD_PASS_5c="no"
+CLIENT_EXEC_5c="${CLIENT_EXEC}"
+CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp"
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Gerrit-Change-Number: 919
Gerrit-PatchSet: 2
Gerrit-Owner: mattock <sa...@pr...>
Gerrit-Reviewer: flichtenheld <fr...@li...>
Gerrit-Reviewer: plaisthos <arn...@rf...>
Gerrit-CC: openvpn-devel <ope...@li...>
Gerrit-Attention: plaisthos <arn...@rf...>
Gerrit-Attention: flichtenheld <fr...@li...>
Gerrit-MessageType: newpatchset
|
|
From: mattock (C. Review) <ge...@op...> - 2025-03-28 07:38:46
|
Attention is currently required from: flichtenheld, plaisthos.
Hello flichtenheld, plaisthos,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
to look at the new patch set (#3).
Change subject: t_server_null: add multi-socket testing
......................................................................
t_server_null: add multi-socket testing
This adds a new multi-socket server that listens on IPv4 and IPv6
localhost addresses for TCP and UDP connections respectively. It also
adds two success tests and one failure test with wrong protocol defined
at the client side.
Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Signed-off-by: Samuli Seppänen <sam...@gm...>
---
M tests/t_server_null_default.rc
1 file changed, 27 insertions(+), 4 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/19/919/3
diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc
index ca8004a..5b74761 100755
--- a/tests/t_server_null_default.rc
+++ b/tests/t_server_null_default.rc
@@ -38,12 +38,14 @@
MAX_CLIENTS="10"
CLIENT_MATCH="Test-Client"
SERVER_EXEC="${top_builddir}/src/openvpn/openvpn"
-SERVER_BASE_OPTS="--daemon --local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BASE_OPTS="--daemon --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BIND_OPTS="--local 127.0.0.1"
SERVER_CIPHER_OPTS=""
SERVER_CERT_OPTS="--ca ${CA} --dh ${DH} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0"
-SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
+SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}"
+SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
-TEST_SERVER_LIST="1 2 3"
+TEST_SERVER_LIST="1 2 3 4"
SERVER_NAME_1="t_server_null_server-1194_udp"
SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0"
@@ -63,6 +65,12 @@
SERVER_EXEC_3="${SERVER_EXEC}"
SERVER_CONF_3="${SERVER_CONF_BASE} ${SERVER_SERVER_3} --lport 1196 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_3} --cipher AES-192-CBC --data-ciphers DEFAULT:AES-192-CBC"
+SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6"
+SERVER_SERVER_4="--server 10.29.43.0 255.255.255.0"
+SERVER_MGMT_PORT_4="11197"
+SERVER_EXEC_4="${SERVER_EXEC}"
+SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}"
+
# Test client configurations
CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn"
CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2"
@@ -72,7 +80,7 @@
CLIENT_CIPHER_OPTS=""
CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1"
-TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c"
+TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c 5a 5b 5c"
CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
@@ -121,3 +129,18 @@
SHOULD_PASS_4c="no"
CLIENT_EXEC_4c="${CLIENT_EXEC}"
CLIENT_CONF_4c="${CLIENT_CONF_BASE} --remote 127.0.0.1 1196 udp --proto udp --cipher AES-192-CBC --data-ciphers AES-128-CBC"
+
+TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp"
+SHOULD_PASS_5a="yes"
+CLIENT_EXEC_5a="${CLIENT_EXEC}"
+CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp"
+
+TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp"
+SHOULD_PASS_5b="yes"
+CLIENT_EXEC_5b="${CLIENT_EXEC}"
+CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp"
+
+TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail"
+SHOULD_PASS_5c="no"
+CLIENT_EXEC_5c="${CLIENT_EXEC}"
+CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp"
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Gerrit-Change-Number: 919
Gerrit-PatchSet: 3
Gerrit-Owner: mattock <sa...@pr...>
Gerrit-Reviewer: flichtenheld <fr...@li...>
Gerrit-Reviewer: plaisthos <arn...@rf...>
Gerrit-CC: openvpn-devel <ope...@li...>
Gerrit-Attention: plaisthos <arn...@rf...>
Gerrit-Attention: flichtenheld <fr...@li...>
Gerrit-MessageType: newpatchset
|
|
From: flichtenheld (C. Review) <ge...@op...> - 2025-03-28 10:57:29
|
Attention is currently required from: mattock, plaisthos. flichtenheld has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/919?usp=email ) Change subject: t_server_null: add multi-socket testing ...................................................................... Patch Set 3: Code-Review-1 (1 comment) Patchset: PS3: generally LGTM, but test failures need to be fixed first -- To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings Gerrit-Project: openvpn Gerrit-Branch: master Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Gerrit-Change-Number: 919 Gerrit-PatchSet: 3 Gerrit-Owner: mattock <sa...@pr...> Gerrit-Reviewer: flichtenheld <fr...@li...> Gerrit-Reviewer: plaisthos <arn...@rf...> Gerrit-CC: openvpn-devel <ope...@li...> Gerrit-Attention: plaisthos <arn...@rf...> Gerrit-Attention: mattock <sa...@pr...> Gerrit-Comment-Date: Fri, 28 Mar 2025 10:57:09 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Gerrit-MessageType: comment |
|
From: mattock (C. Review) <ge...@op...> - 2025-06-23 09:35:32
|
Attention is currently required from: flichtenheld, mattock, plaisthos.
Hello flichtenheld, plaisthos,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
to look at the new patch set (#6).
The following approvals got outdated and were removed:
Code-Review-1 by flichtenheld
Change subject: t_server_null: add multi-socket testing
......................................................................
t_server_null: add multi-socket testing
This adds a new multi-socket server that listens on IPv4 and IPv6
localhost addresses for TCP and UDP connections respectively. It also
adds two success tests and one failure test with wrong protocol defined
at the client side.
Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Signed-off-by: Samuli Seppänen <sa...@pm...>
---
M tests/t_server_null_default.rc
1 file changed, 27 insertions(+), 4 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/19/919/6
diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc
index 41ec591..a1c68cd 100755
--- a/tests/t_server_null_default.rc
+++ b/tests/t_server_null_default.rc
@@ -38,12 +38,14 @@
MAX_CLIENTS="10"
CLIENT_MATCH="Test-Client"
SERVER_EXEC="${top_builddir}/src/openvpn/openvpn"
-SERVER_BASE_OPTS="--local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BASE_OPTS="--dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn"
+SERVER_BIND_OPTS="--local 127.0.0.1"
SERVER_CIPHER_OPTS=""
SERVER_CERT_OPTS="--ca ${CA} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0"
-SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
+SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}"
+SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}"
-TEST_SERVER_LIST="1 2 3"
+TEST_SERVER_LIST="1 2 3 4"
SERVER_NAME_1="t_server_null_server-1194_udp"
SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0"
@@ -63,6 +65,12 @@
SERVER_EXEC_3="${SERVER_EXEC}"
SERVER_CONF_3="${SERVER_CONF_BASE} ${SERVER_SERVER_3} --lport 1196 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_3} --dh none --cipher AES-192-CBC --data-ciphers DEFAULT:AES-192-CBC"
+SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6"
+SERVER_SERVER_4="--server 10.29.44.0 255.255.255.0"
+SERVER_MGMT_PORT_4="11197"
+SERVER_EXEC_4="${SERVER_EXEC}"
+SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}"
+
# Test client configurations
CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn"
CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2"
@@ -72,7 +80,7 @@
CLIENT_CIPHER_OPTS=""
CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1"
-TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c"
+TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c 5a 5b 5c"
CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}"
@@ -121,3 +129,18 @@
SHOULD_PASS_4c="no"
CLIENT_EXEC_4c="${CLIENT_EXEC}"
CLIENT_CONF_4c="${CLIENT_CONF_BASE} --remote 127.0.0.1 1196 udp --proto udp --cipher AES-192-CBC --data-ciphers AES-128-CBC"
+
+TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp"
+SHOULD_PASS_5a="yes"
+CLIENT_EXEC_5a="${CLIENT_EXEC}"
+CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp"
+
+TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp"
+SHOULD_PASS_5b="yes"
+CLIENT_EXEC_5b="${CLIENT_EXEC}"
+CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp"
+
+TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail"
+SHOULD_PASS_5c="no"
+CLIENT_EXEC_5c="${CLIENT_EXEC}"
+CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp"
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5
Gerrit-Change-Number: 919
Gerrit-PatchSet: 6
Gerrit-Owner: mattock <sa...@pr...>
Gerrit-Reviewer: flichtenheld <fr...@li...>
Gerrit-Reviewer: plaisthos <arn...@rf...>
Gerrit-CC: openvpn-devel <ope...@li...>
Gerrit-Attention: plaisthos <arn...@rf...>
Gerrit-Attention: flichtenheld <fr...@li...>
Gerrit-Attention: mattock <sa...@pr...>
Gerrit-MessageType: newpatchset
|
|
From: cron2 (C. Review) <ge...@op...> - 2025-06-23 12:08:36
|
Attention is currently required from: flichtenheld, mattock, plaisthos. cron2 has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/919?usp=email ) Change subject: t_server_null: add multi-socket testing ...................................................................... Patch Set 6: (1 comment) Patchset: PS6: The failures on NetBSD and OpenBSD are due to "by default there is only /dev/tun0 to /dev/tun3, and no dynamic device nodes". Running "sudo /dev/MAKEDEV /dev/tun4" enables 1 community VPN + 4 test servers. We should re-test when the other BBs are fixed -- To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings Gerrit-Project: openvpn Gerrit-Branch: master Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Gerrit-Change-Number: 919 Gerrit-PatchSet: 6 Gerrit-Owner: mattock <sa...@pr...> Gerrit-Reviewer: flichtenheld <fr...@li...> Gerrit-Reviewer: plaisthos <arn...@rf...> Gerrit-CC: cron2 <ge...@gr...> Gerrit-CC: openvpn-devel <ope...@li...> Gerrit-Attention: plaisthos <arn...@rf...> Gerrit-Attention: flichtenheld <fr...@li...> Gerrit-Attention: mattock <sa...@pr...> Gerrit-Comment-Date: Mon, 23 Jun 2025 12:08:26 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment |
|
From: cron2 (C. Review) <ge...@op...> - 2025-07-08 07:33:50
|
Attention is currently required from: flichtenheld, mattock, plaisthos. cron2 has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/919?usp=email ) Change subject: t_server_null: add multi-socket testing ...................................................................... Patch Set 6: Code-Review+2 -- To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings Gerrit-Project: openvpn Gerrit-Branch: master Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Gerrit-Change-Number: 919 Gerrit-PatchSet: 6 Gerrit-Owner: mattock <sa...@pr...> Gerrit-Reviewer: cron2 <ge...@gr...> Gerrit-Reviewer: flichtenheld <fr...@li...> Gerrit-Reviewer: plaisthos <arn...@rf...> Gerrit-CC: openvpn-devel <ope...@li...> Gerrit-Attention: plaisthos <arn...@rf...> Gerrit-Attention: flichtenheld <fr...@li...> Gerrit-Attention: mattock <sa...@pr...> Gerrit-Comment-Date: Tue, 08 Jul 2025 07:33:36 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment |
|
From: Gert D. <ge...@gr...> - 2025-07-08 07:34:08
|
From: Samuli Seppänen <sam...@gm...> This adds a new multi-socket server that listens on IPv4 and IPv6 localhost addresses for TCP and UDP connections respectively. It also adds two success tests and one failure test with wrong protocol defined at the client side. Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Signed-off-by: Samuli Seppänen <sa...@pm...> Acked-by: Gert Doering <ge...@gr...> --- This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master. Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/919 This mail reflects revision 6 of this Change. Acked-by according to Gerrit (reflected above): Gert Doering <ge...@gr...> diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc index 41ec591..a1c68cd 100755 --- a/tests/t_server_null_default.rc +++ b/tests/t_server_null_default.rc @@ -38,12 +38,14 @@ MAX_CLIENTS="10" CLIENT_MATCH="Test-Client" SERVER_EXEC="${top_builddir}/src/openvpn/openvpn" -SERVER_BASE_OPTS="--local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BASE_OPTS="--dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BIND_OPTS="--local 127.0.0.1" SERVER_CIPHER_OPTS="" SERVER_CERT_OPTS="--ca ${CA} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0" -SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" +SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}" +SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" -TEST_SERVER_LIST="1 2 3" +TEST_SERVER_LIST="1 2 3 4" SERVER_NAME_1="t_server_null_server-1194_udp" SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0" @@ -63,6 +65,12 @@ SERVER_EXEC_3="${SERVER_EXEC}" SERVER_CONF_3="${SERVER_CONF_BASE} ${SERVER_SERVER_3} --lport 1196 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_3} --dh none --cipher AES-192-CBC --data-ciphers DEFAULT:AES-192-CBC" +SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6" +SERVER_SERVER_4="--server 10.29.44.0 255.255.255.0" +SERVER_MGMT_PORT_4="11197" +SERVER_EXEC_4="${SERVER_EXEC}" +SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}" + # Test client configurations CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn" CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2" @@ -72,7 +80,7 @@ CLIENT_CIPHER_OPTS="" CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1" -TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c" +TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c 5a 5b 5c" CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" @@ -121,3 +129,18 @@ SHOULD_PASS_4c="no" CLIENT_EXEC_4c="${CLIENT_EXEC}" CLIENT_CONF_4c="${CLIENT_CONF_BASE} --remote 127.0.0.1 1196 udp --proto udp --cipher AES-192-CBC --data-ciphers AES-128-CBC" + +TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp" +SHOULD_PASS_5a="yes" +CLIENT_EXEC_5a="${CLIENT_EXEC}" +CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp" + +TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp" +SHOULD_PASS_5b="yes" +CLIENT_EXEC_5b="${CLIENT_EXEC}" +CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp" + +TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail" +SHOULD_PASS_5c="no" +CLIENT_EXEC_5c="${CLIENT_EXEC}" +CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp" |
|
From: Gert D. <ge...@gr...> - 2025-07-08 07:54:42
|
The buildbots have tested this very thoroughly, I just figured out why
it fails on NetBSD and OpenBSD - these systems, by default, have a limit
of 4 tun devices and the BBs use one of them for the community VPN,
so when starting 4 server instances, we run out.
Fix: # cd /dev ; ./MAKEDEV tun4
yes, nothing dynamic there...
Also, we agreed that we should fix the number mapping "client instance
number -> server number" so that it's easier to maintain because we
know "all client tests 4<x> go to server instance <4>" while it's a bit
unorderly right now. But this will be a different patch as it affects
existing instances that are unrelated to *this* new feature.
Your patch has been applied to the master branch.
commit fd6d0f3cf67622c3ae052c5f94abd5fd70ee7995
Author: Samuli Seppänen
Date: Tue Jul 8 09:33:51 2025 +0200
t_server_null: add multi-socket testing
Signed-off-by: Samuli Seppänen <sa...@pm...>
Acked-by: Gert Doering <ge...@gr...>
Message-Id: <202...@gr...>
URL: https://www.mail-archive.com/ope...@li.../msg32061.html
Signed-off-by: Gert Doering <ge...@gr...>
--
kind regards,
Gert Doering
|
|
From: cron2 (C. Review) <ge...@op...> - 2025-07-08 07:55:54
|
cron2 has uploaded a new patch set (#7) to the change originally created by mattock. ( http://gerrit.openvpn.net/c/openvpn/+/919?usp=email ) The following approvals got outdated and were removed: Code-Review+2 by cron2 Change subject: t_server_null: add multi-socket testing ...................................................................... t_server_null: add multi-socket testing This adds a new multi-socket server that listens on IPv4 and IPv6 localhost addresses for TCP and UDP connections respectively. It also adds two success tests and one failure test with wrong protocol defined at the client side. Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Signed-off-by: Samuli Seppänen <sa...@pm...> Acked-by: Gert Doering <ge...@gr...> Message-Id: <202...@gr...> URL: https://www.mail-archive.com/ope...@li.../msg32061.html Signed-off-by: Gert Doering <ge...@gr...> --- M tests/t_server_null_default.rc 1 file changed, 27 insertions(+), 4 deletions(-) git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/19/919/7 diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc index 41ec591..a1c68cd 100755 --- a/tests/t_server_null_default.rc +++ b/tests/t_server_null_default.rc @@ -38,12 +38,14 @@ MAX_CLIENTS="10" CLIENT_MATCH="Test-Client" SERVER_EXEC="${top_builddir}/src/openvpn/openvpn" -SERVER_BASE_OPTS="--local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BASE_OPTS="--dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BIND_OPTS="--local 127.0.0.1" SERVER_CIPHER_OPTS="" SERVER_CERT_OPTS="--ca ${CA} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0" -SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" +SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}" +SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" -TEST_SERVER_LIST="1 2 3" +TEST_SERVER_LIST="1 2 3 4" SERVER_NAME_1="t_server_null_server-1194_udp" SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0" @@ -63,6 +65,12 @@ SERVER_EXEC_3="${SERVER_EXEC}" SERVER_CONF_3="${SERVER_CONF_BASE} ${SERVER_SERVER_3} --lport 1196 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_3} --dh none --cipher AES-192-CBC --data-ciphers DEFAULT:AES-192-CBC" +SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6" +SERVER_SERVER_4="--server 10.29.44.0 255.255.255.0" +SERVER_MGMT_PORT_4="11197" +SERVER_EXEC_4="${SERVER_EXEC}" +SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}" + # Test client configurations CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn" CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2" @@ -72,7 +80,7 @@ CLIENT_CIPHER_OPTS="" CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1" -TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c" +TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c 5a 5b 5c" CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" @@ -121,3 +129,18 @@ SHOULD_PASS_4c="no" CLIENT_EXEC_4c="${CLIENT_EXEC}" CLIENT_CONF_4c="${CLIENT_CONF_BASE} --remote 127.0.0.1 1196 udp --proto udp --cipher AES-192-CBC --data-ciphers AES-128-CBC" + +TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp" +SHOULD_PASS_5a="yes" +CLIENT_EXEC_5a="${CLIENT_EXEC}" +CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp" + +TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp" +SHOULD_PASS_5b="yes" +CLIENT_EXEC_5b="${CLIENT_EXEC}" +CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp" + +TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail" +SHOULD_PASS_5c="no" +CLIENT_EXEC_5c="${CLIENT_EXEC}" +CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp" -- To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings Gerrit-Project: openvpn Gerrit-Branch: master Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Gerrit-Change-Number: 919 Gerrit-PatchSet: 7 Gerrit-Owner: mattock <sa...@pr...> Gerrit-Reviewer: cron2 <ge...@gr...> Gerrit-Reviewer: flichtenheld <fr...@li...> Gerrit-Reviewer: plaisthos <arn...@rf...> Gerrit-CC: openvpn-devel <ope...@li...> Gerrit-MessageType: newpatchset |
|
From: cron2 (C. Review) <ge...@op...> - 2025-07-08 07:55:54
|
cron2 has submitted this change. ( http://gerrit.openvpn.net/c/openvpn/+/919?usp=email ) Change subject: t_server_null: add multi-socket testing ...................................................................... t_server_null: add multi-socket testing This adds a new multi-socket server that listens on IPv4 and IPv6 localhost addresses for TCP and UDP connections respectively. It also adds two success tests and one failure test with wrong protocol defined at the client side. Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Signed-off-by: Samuli Seppänen <sa...@pm...> Acked-by: Gert Doering <ge...@gr...> Message-Id: <202...@gr...> URL: https://www.mail-archive.com/ope...@li.../msg32061.html Signed-off-by: Gert Doering <ge...@gr...> --- M tests/t_server_null_default.rc 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/tests/t_server_null_default.rc b/tests/t_server_null_default.rc index 41ec591..a1c68cd 100755 --- a/tests/t_server_null_default.rc +++ b/tests/t_server_null_default.rc @@ -38,12 +38,14 @@ MAX_CLIENTS="10" CLIENT_MATCH="Test-Client" SERVER_EXEC="${top_builddir}/src/openvpn/openvpn" -SERVER_BASE_OPTS="--local 127.0.0.1 --dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BASE_OPTS="--dev tun --topology subnet --max-clients $MAX_CLIENTS --persist-tun --verb 3 --duplicate-cn" +SERVER_BIND_OPTS="--local 127.0.0.1" SERVER_CIPHER_OPTS="" SERVER_CERT_OPTS="--ca ${CA} --cert ${SERVER_CERT} --key ${SERVER_KEY} --tls-auth ${TA} 0" -SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" +SERVER_CONF_BASE="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS} ${SERVER_BIND_OPTS}" +SERVER_CONF_BASE_MULTISOCKET="${SERVER_BASE_OPTS} ${SERVER_CIPHER_OPTS} ${SERVER_CERT_OPTS}" -TEST_SERVER_LIST="1 2 3" +TEST_SERVER_LIST="1 2 3 4" SERVER_NAME_1="t_server_null_server-1194_udp" SERVER_SERVER_1="--server 10.29.41.0 255.255.255.0" @@ -63,6 +65,12 @@ SERVER_EXEC_3="${SERVER_EXEC}" SERVER_CONF_3="${SERVER_CONF_BASE} ${SERVER_SERVER_3} --lport 1196 --proto udp --management 127.0.0.1 ${SERVER_MGMT_PORT_3} --dh none --cipher AES-192-CBC --data-ciphers DEFAULT:AES-192-CBC" +SERVER_NAME_4="t_server_null_server-1197_multisocket_ipv4_ipv6" +SERVER_SERVER_4="--server 10.29.44.0 255.255.255.0" +SERVER_MGMT_PORT_4="11197" +SERVER_EXEC_4="${SERVER_EXEC}" +SERVER_CONF_4="${SERVER_CONF_BASE_MULTISOCKET} ${SERVER_SERVER_4} --local 127.0.0.1 1197 tcp --local ::1 1197 udp --management 127.0.0.1 ${SERVER_MGMT_PORT_4}" + # Test client configurations CLIENT_EXEC="${top_builddir}/src/openvpn/openvpn" CLIENT_BASE_OPTS="--client --nobind --remote-cert-tls server --persist-tun --verb 3 --resolv-retry infinite --connect-retry-max 3 --server-poll-timeout 5 --explicit-exit-notify 3 --script-security 2" @@ -72,7 +80,7 @@ CLIENT_CIPHER_OPTS="" CLIENT_CERT_OPTS="--ca ${CA} --cert ${CLIENT_CERT} --key ${CLIENT_KEY} --tls-auth ${TA} 1" -TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c" +TEST_RUN_LIST="1 1L 2 2L 3 4a 4b 4c 5a 5b 5c" CLIENT_CONF_BASE="${CLIENT_NULL_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" CLIENT_CONF_BASE_LWIP="${CLIENT_LWIP_OPTS} ${CLIENT_BASE_OPTS} ${CLIENT_CIPHER_OPTS} ${CLIENT_CERT_OPTS}" @@ -121,3 +129,18 @@ SHOULD_PASS_4c="no" CLIENT_EXEC_4c="${CLIENT_EXEC}" CLIENT_CONF_4c="${CLIENT_CONF_BASE} --remote 127.0.0.1 1196 udp --proto udp --cipher AES-192-CBC --data-ciphers AES-128-CBC" + +TEST_NAME_5a="t_server_null_client.sh-openvpn_current_multisocket_ipv4_tcp" +SHOULD_PASS_5a="yes" +CLIENT_EXEC_5a="${CLIENT_EXEC}" +CLIENT_CONF_5a="${CLIENT_CONF_BASE} --remote 127.0.0.1 1197 tcp" + +TEST_NAME_5b="t_server_null_client.sh-openvpn_current_multisocket_ipv6_udp" +SHOULD_PASS_5b="yes" +CLIENT_EXEC_5b="${CLIENT_EXEC}" +CLIENT_CONF_5b="${CLIENT_CONF_BASE} --remote ::1 1197 udp" + +TEST_NAME_5c="t_server_null_client.sh-openvpn_current_multisocket_ipv6_tcp_fail" +SHOULD_PASS_5c="no" +CLIENT_EXEC_5c="${CLIENT_EXEC}" +CLIENT_CONF_5c="${CLIENT_CONF_BASE} --remote ::1 1197 tcp" -- To view, visit http://gerrit.openvpn.net/c/openvpn/+/919?usp=email To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings Gerrit-Project: openvpn Gerrit-Branch: master Gerrit-Change-Id: I4ebe1158c36a641888131e824f59004a0f8fb4c5 Gerrit-Change-Number: 919 Gerrit-PatchSet: 7 Gerrit-Owner: mattock <sa...@pr...> Gerrit-Reviewer: cron2 <ge...@gr...> Gerrit-Reviewer: flichtenheld <fr...@li...> Gerrit-Reviewer: plaisthos <arn...@rf...> Gerrit-CC: openvpn-devel <ope...@li...> Gerrit-MessageType: merged |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X