This is my current config but phone does not connect. I've followed the
instructions at
http://a925.albatorsk.com/
to connect the a925 via bluetooth. After lots of trying I think the
a925 has a dodgy obex client, can't find any info about it or by using
syncml-obex-client -u .... just get no usb obex interfaces found! I've
attached the relative output from lsusb -v if anyone can tell me anymore
from that but I can not find a syncml service ... :-(
Can anyone tell me how to complete this http-server config. It still
will not connect when using
mysynctool --sync group
<config><username>myusername</username><password>mypassword</password><url>http://169.254.1.68</url><port>5079</port>
<usestringtable>0</usestringtable><onlyreplace>0</onlyreplace><recvLimit>0</recvLimit><maxObjSize>0</maxObjSize>
<contact_db>addressbook</contact_db><calendar_db>calendar</calendar_db><note_db>notes</note_db></config>
Thanks
Jim
Bus 001 Device 007: ID 22b8:4002 Motorola PCS A920/A925 UMTS Phone
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x22b8 Motorola PCS
idProduct 0x4002 A920/A925 UMTS Phone
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 62
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3
bmAttributes 0xc0
Self Powered
MaxPower 20mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 4
CDC Header:
bcdCDC 1.00
CDC ACM:
bmCapabilities 0x0f
connection notifications
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 128
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
This message has been checked for viruses but the contents of an attachment
may still contain software viruses, which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.
|
