Re: [Opensync-users] opensync syncml plugin

[Alex L. <len...@tc...>]

Thanks Armin,

I've upgraded to the latest svn debs and now get further but still not getting 
a complete sync.

I've attached a gzipped tar archive with the trace logs and command output as 
well as a sample vcard that I'm trying to sync. On the phone side I get:

Connecting...
Initialising...
Disconnecting...
Sync incompl...

At this point msynctool stalls on the pc.

Hopefully, I'm just doing something wrong now but would appreciate any help.

Thanks,

Alex

On Monday 18 September 2006 01:13, you wrote:
> Hi Alex,
>
> I fixed the issue now in subversion. I also added a unit test so that
> such things dont slip again in the future.
>
> Thanks for your help!
>
> Best Regards,
> Armin Bauer
>
> Alex Lennon wrote:
> > Hi Armin,
> >
> > Many thanks for the prompt reply.
> >
> > I've tried changing the maxobjsize to 734000 but no noticeable change I'm
> > afraid. I've submitted a new ticket throught the opensync.org website (#
> > 334). Some of the log files got uploaded twice by mistake as I wasn't
> > familiar with the system I'm afraid, but hopefully everything is there
> > now.
> >
> > Thanks again,
> >
> > Alex
> >
> > On Monday 11 September 2006 23:30, you wrote:
> >> Hi Alex,
> >>
> >> I own a nokia 6680 as well, but cannot test it right now (its not here
> >> at the moment). I will see if my 6680 works correctly.
> >>
> >> Could you please try to set maxobjsize to a value (like 734000) and see
> >> if it helps?
> >>
> >> Could you also open a bug for this on opensync.org, so that i can track
> >> this issue (you might need to register to create a bug)?
> >>
> >> Best Regards,
> >> Armin
> >>
> >> Alex Lennon wrote:
> >>> Dear Armin,
> >>>
> >>> I've been trying to get the syncml plugin to work with my Nokia 6680
> >>> over bluetooth but msynctool keeps hanging when I try to sync.
> >>>
> >>> I've included trace files, results of "grep ERROR *" (error.log), the
> >>> config for the members of my sync group (pc_nokia) (file-sync.conf and
> >>> syncml-obex-client.conf), and the terminal output (output.log).
> >>>
> >>> This was run with my firewall disabled in case that was the issue.
> >>>
> >>> I'm working off the debian etch packages and multisync-cli
> >>> 0.18+svn20060817-etch1.
> >>>
> >>> Any help would be greatly appreciated.
> >>>
> >>> Thanks and kind regards,
> >>>
> >>> Alex

-- 
Alex Lennon, B.E., Ph.D.
Lead Technical Developer
Patient-Specific Prosthesis Analysis (PSPA)
Trinity Centre for Bioengineering
Parsons Building
Trinity College
Dublin 2
Ireland

Tel: +353 (0)1 896 2396
Fax: +353 (0)1 679 5554

http://www.pspa.ie
http://www.biomechanics.ie