Re: [Opensync-users] Tips for troubleshooting syncml connect with SE phone

[Ashley J G. <agi...@pu...>]

On Wednesday 20 September 2006 12:50, Dave Hall wrote:
> I have not tried sycing the phone again via syncml over bt.  I have
> tried irmc over bt just recently and it dumps the entries to files.

Hi Dave,
	Any details on how you managed to sync using irmc? Whenever I try doing that 
I get the same sort of problem, the phone sits there with the synchronizing 
animation going, and the PC end thinks it's waiting for something from the 
phone. I have included a log below of the output. 

This is using multisynk with the IrmcSync Konnector, over bt, same result if 
the "Phone model" setting is set to "other" or to "Sony/Ericsson T68i". 

I end up having to kill multisynk as it seems it is blocking while waiting for 
the phone. All the log output below happens very quickly, it is at the last 
line with the sendRequest() at line 765 which just sits there.

I rebooted the phone between attempts too, as I have noticed in windows that 
if I have a botched sync attempt in linux the phone won't sync with windows 
until after a phone reboot.

If anyone can see where more detailed info would help diagnose the problem 
please yell out (and please feel free to trim the log output in replies).

-- 
Regards,
	Ashley J Gittins
	web: 	http://www.purple.dropbear.id.au
	jabber: agi...@pu...

QObexClient::connectClient()
QObexClient::sendRequest( ... )
QObexTransport::setBlocking( 1 )
QObexTransport::connected( ... )
QObexClient::transportConnected()
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 19
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 19 )
QObexTransport::writeBlock(): write( 18, ., 19 ) returns 19
QObexTransport::readyWrite(): written = 19
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): ConnectPacket
QObexTransport::readBlock( 4 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 4 )
QObexTransport::readBlock(): read( 18, ., 4 ) returns 4
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 9 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 9 )
QObexTransport::readBlock(): read( 18, ., 9 ) returns 9
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read dword header value
QObexTransport::readBlock( 4 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 4 )
QObexTransport::readBlock(): read( 18, ., 4 ) returns 4
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleConnectResponse( ... )
QObexClient::handleConnectResponse(): We want a directed connection
QObexClient::handleConnectResponse(): Using connection id 1
QObexClient::handleConnectResponse(): mConnected = true;
QObexClient::makeIdle()
Got Response Packet
   Success, final bit set
        Who
        ConnectionId
QObexClient::sendRequest() at line 765
QObexClient::get( ... )
QObexClient::sendRequest( ... )
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 55
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 55 )
QObexTransport::writeBlock(): write( 18, ., 55 ) returns 55
QObexTransport::readyWrite(): written = 55
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): NormalPacket
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 285 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 285 )
QObexTransport::readBlock(): read( 18, ., 285 ) returns 285
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleGetResponse( ... )
QObexClient::handleGetResponse() Success
Got Response Packet
   Success, final bit set
        BodyEnd
QObexClient::makeIdle()
QObexClient::sendRequest() at line 765
QObexClient::get( ... )
QObexClient::sendRequest( ... )
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 57
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 57 )
QObexTransport::writeBlock(): write( 18, ., 57 ) returns 57
QObexTransport::readyWrite(): written = 57
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): NormalPacket
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 133 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 133 )
QObexTransport::readBlock(): read( 18, ., 133 ) returns 133
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleGetResponse( ... )
QObexClient::handleGetResponse() Success
Got Response Packet
   Success, final bit set
        BodyEnd
QObexClient::makeIdle()
QObexClient::sendRequest() at line 765
QObexClient::get( ... )
QObexClient::sendRequest( ... )
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 57
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 57 )
QObexTransport::writeBlock(): write( 18, ., 57 ) returns 57
QObexTransport::readyWrite(): written = 57
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): NormalPacket
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 4 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 4 )
QObexTransport::readBlock(): read( 18, ., 4 ) returns 4
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleGetResponse( ... )
QObexClient::handleGetResponse() Success
Got Response Packet
   Success, final bit set
        BodyEnd
QObexClient::makeIdle()
QObexClient::sendRequest() at line 765
QObexClient::get( ... )
QObexClient::sendRequest( ... )
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 77
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 77 )
QObexTransport::writeBlock(): write( 18, ., 77 ) returns 77
QObexTransport::readyWrite(): written = 77
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): NormalPacket
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 228 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 228 )
QObexTransport::readBlock(): read( 18, ., 228 ) returns 228
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleGetResponse( ... )
QObexClient::handleGetResponse() Success
Got Response Packet
   Success, final bit set
        BodyEnd
QObexClient::makeIdle()
QObexClient::sendRequest() at line 765
QObexClient::get( ... )
QObexClient::sendRequest( ... )
QObexTransport::sendObject( const QObexObject& )
QObexTransport::sendObject() at 165, size = 77
QObexTransport::blocking()
QObexTransport::readyWrite()
QObexTransport::writeBlock( buf, 77 )
QObexTransport::writeBlock(): write( 18, ., 77 ) returns 77
QObexTransport::readyWrite(): written = 77
QObexClient::transportPacketWritten()
QObexTransport::selectModeChanged( 1, 0 )
QObexClient::transportSelectModeChanged( ... )
QObexTransport::blocking()
QObexClient::sendRequest(): transport()->blocking(): TRUE
QObexClient::sendRequest() at line 755
QObexTransport::doSelect()
QObexTransport::doSelect(): try to select
QObexTransport::doSelect(): infinite select
QObexTransport::doSelect(): select returns 1
QObexTransport::slotIOReady()
QObexTransport::readyRead()
QObexTransport::readyRead(): try to read core header.
QObexTransport::readBlock( 3 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 3 )
QObexTransport::readBlock(): read( 18, ., 3 ) returns 3
QObexTransport::readyRead(): Header seems to be complete
QObexTransport::readyRead(): try to read additional core header.
QObexTransport::readyRead(): NormalPacket
QObexTransport::readyRead(): Try to read header id
QObexTransport::readBlock( 1 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 1 )
QObexTransport::readBlock(): read( 18, ., 1 ) returns 1
QObexTransport::readyRead(): Try to read header length
QObexTransport::readBlock( 2 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 2 )
QObexTransport::readBlock(): read( 18, ., 2 ) returns 2
QObexTransport::readyRead(): Try to read header value
QObexTransport::readBlock( 205 )
QObexTransport::blocking()
QObexTransport::readBlock( buf, 205 )
QObexTransport::readBlock(): read( 18, ., 205 ) returns 205
QObexTransport::readyRead(): packet ready
QObexClient::transportPacketRecieved( obj )
QObexClient::transportPacketRecieved() at 616
QObexClient::transportPacketRecieved() at 623, response code = Success, final 
bit set
QObexClient::handleGetResponse( ... )
QObexClient::handleGetResponse() Success
Got Response Packet
   Success, final bit set
        BodyEnd
QObexClient::makeIdle()
QObexClient::sendRequest() at line 765