Menu
▾
▴
Re: [Opensync-users] SyncML over bluetooth/obex again
|
From: kevin j. <rin...@kj...> - 2006-01-25 14:41:00
|
And I have the exact opposite problem with my phone - there seems to be no way to accept an incoming sync on my 6680. Excuse my ignorance on this, but can anyone confirm/deny if there is currently any way to accept incoming sync over bluetooth with opensync? Cheers, KEv. On Mon, 2006-01-23 at 17:47 +0100, Martin Schulze wrote: > $ msynctool --sync testsync --wait > > This doesn't seem to work for the Samsung - at least I have no idea how > to initiate the sync from the SGH-D600, then, so the msynctool waits ad > infinitum. > > What changes are needed in libsyncml to trigger the syncronization from > the pc side? > > Regards, > > Martin > > > Am Montag, den 23.01.2006, 11:25 +0000 schrieb kevin james: > > I've been trying to sync my Nokia 6680 with opensync, first trying the > > syncml-http-server, until I realised that it is only inbound and my > > laptop doesn't have a "real" IP address. > > > > Then I tried using the obex-client - some info on the mailing list > > archive (from around November time) says it's still not working, don't > > know if that's changed yet. Also I couldn't find any info on what the > > config needs to be. > > > > One thing (I think) I did find out is that the obex-client is also > > inbound only, so you will need to test it with: > > > > $ msynctool --sync testsync --wait > > > > so that it will wait for a connection. > > > > I am still having problems at the phone end trying to use bluetooth/obex > > so I have no messages from opensync saying if anything has worked or > > not. I saw someone mention that some of the devs have 6680's - do any of > > them have any advice? > > > > Cheers, > > KEv. > > > > > > On Mon, 2006-01-23 at 01:11 +0100, Martin Schulze wrote: > > > Hi! > > > > > > Encouraged by > > > > > > http://sourceforge.net/mailarchive/forum.php?thread_id=9428612&forum_id=44467 > > > > > > I've configured a synchronizing group between my evolution environment > > > (plugin evo2-sync) and /dev/rfcomm0 (plugin syncml-obex-client) which is > > > bound to the serial port bluetooth service of my mobile phone (Samsung > > > SGH-D600). libsyncml and syncml-plugin are fresh checkouts from svn. The > > > configuration for the syncml-plugin reads: > > > > > > <config> > > > <username></username> > > > <password></password> > > > <path>/dev/rfcomm0</path> > > > <type>1</type> > > > <usestringtable>2</usestringtable> > > > <onlyreplace>0</onlyreplace> > > > <contact_db>addressbook</contact_db> > > > <calendar_db>calendar</calendar_db> > > > <task_db>tasks</task_db> > > > </config> > > > > > > However, I run into the same troubles discussed in > > > > > > http://sourceforge.net/mailarchive/forum.php?thread_id=8902424&forum_id=44467 > > > > > > E.i. > > > > > > $ msynctool --sync testsync > > > > > > yields: > > > > > > Synchronizing group "testsync" > > > Member 1 of type evo2-sync just connected > > > Member 2 of type syncml-obex-client had an error while connecting: No > > > success > > > Member 1 of type evo2-sync just disconnected > > > All clients have disconnected > > > The sync failed: Unable to connect one of the members > > > Error synchronizing: Unable to connect one of the members > > > > > > The trace output from the syncml-obex-client plugin reads as follows: > > > > > > [1137969737.641293] +++++++++ This is the client #2 > > > (syncml-obex-client plugin) of group testsync +++++++++ > > > [1137969737.746230] >>>>>>> client_message_handler(0x80638f0, > > > 0x8077aa0, 0x80614e0) > > > [1137969737.746285] [CLI] DEBUG: Client message handler > > > called for message "CONNECT" > > > [1137969737.746306] >>>>>>> osync_member_connect(0x80625c0, > > > 0xb7ebbd70, 0x8077aa0) > > > [1137969737.746330] >>>>>>> > > > client_connect(0x8077e08) > > > [1137969741.853995] >>>>>>> > > > osync_context_report_osyncerror(0x8077e08, 0xb6b99244:(No success)) > > > [1137969741.854070] [CLI] WARNING: > > > Member is replying with message 0x807ef48 to message 0x8077aa0:"CONNECT" > > > with error 1: No success > > > [1137969741.854106] <<<<<<< > > > osync_context_report_osyncerror > > > [1137969741.854126] <--- ERROR --- client_connect: > > > No success > > > [1137969741.854145] <<<<<<< osync_member_connect > > > [1137969741.854163] <<<<<<< client_message_handler > > > > > > Does anybody have an idea where the problem lies? To start with: is it > > > more likely from the OBEX transport layer or a SyncML related problem? > > > Is there anything I can do to help getting the thing to work? > > > > > > The only information related to SyncML with my mobile phone I've found > > > up to now is here: > > > > > > http://www.traud.de/gsm/samsung.htm > > > > > > I have just e-mailed Samsung about the SyncML version that the SGH-D600 > > > is using. Has it already been clarified, how to find the correct values > > > of the XXX_db parameters in the configuration of the syncml-plugin? > > > > > > Regards, > > > > > > Martin > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files > > > for problems? Stop! Download the new AJAX search engine that makes > > > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 > > > _______________________________________________ > > > Opensync-users mailing list > > > Ope...@li... > > > https://lists.sourceforge.net/lists/listinfo/opensync-users > > > > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 > _______________________________________________ > Opensync-users mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensync-users > |
