Re: [Opensync-users] SyncML over bluetooth/obex again

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

$ msynctool --sync testsync --wait

This doesn't seem to work for the Samsung - at least I have no idea how
to initiate the sync from the SGH-D600, then, so the msynctool waits ad
infinitum.

What changes are needed in libsyncml to trigger the syncronization from
the pc side?

Regards,

  Martin

Am Montag, den 23.01.2006, 11:25 +0000 schrieb kevin james:
> I've been trying to sync my Nokia 6680 with opensync, first trying the
> syncml-http-server, until I realised that it is only inbound and my
> laptop doesn't have a "real" IP address.
> 
> Then I tried using the obex-client - some info on the mailing list
> archive (from around November time) says it's still not working, don't
> know if that's changed yet. Also I couldn't find any info on what the
> config needs to be.
> 
> One thing (I think) I did find out is that the obex-client is also
> inbound only, so you will need to test it with:
> 
> $ msynctool --sync testsync --wait
> 
> so that it will wait for a connection.
> 
> I am still having problems at the phone end trying to use bluetooth/obex
> so I have no messages from opensync saying if anything has worked or
> not. I saw someone mention that some of the devs have 6680's - do any of
> them have any advice?
> 
> Cheers,
> KEv.
> 
> 
> On Mon, 2006-01-23 at 01:11 +0100, Martin Schulze wrote:
> > Hi!
> > 
> > Encouraged by
> > 
> > http://sourceforge.net/mailarchive/forum.php?thread_id=9428612&forum_id=44467
> > 
> > I've configured a synchronizing group between my evolution environment
> > (plugin evo2-sync) and /dev/rfcomm0 (plugin syncml-obex-client) which is
> > bound to the serial port bluetooth service of my mobile phone (Samsung
> > SGH-D600). libsyncml and syncml-plugin are fresh checkouts from svn. The
> > configuration for the syncml-plugin reads:
> > 
> > <config>
> >   <username></username>
> >   <password></password>
> >   <path>/dev/rfcomm0</path>
> >   <type>1</type>
> >   <usestringtable>2</usestringtable>
> >   <onlyreplace>0</onlyreplace>
> >   <contact_db>addressbook</contact_db>
> >   <calendar_db>calendar</calendar_db>
> >   <task_db>tasks</task_db>
> > </config>
> > 
> > However, I run into the same troubles discussed in
> > 
> > http://sourceforge.net/mailarchive/forum.php?thread_id=8902424&forum_id=44467
> > 
> > E.i.
> > 
> > $ msynctool --sync testsync
> > 
> > yields:
> > 
> > Synchronizing group "testsync"
> > Member 1 of type evo2-sync just connected
> > Member 2 of type syncml-obex-client had an error while connecting: No
> > success
> > Member 1 of type evo2-sync just disconnected
> > All clients have disconnected
> > The sync failed: Unable to connect one of the members
> > Error synchronizing: Unable to connect one of the members
> > 
> > The trace output from the syncml-obex-client plugin reads as follows:
> > 
> > [1137969737.641293]     +++++++++ This is the client #2
> > (syncml-obex-client plugin) of group testsync +++++++++
> > [1137969737.746230]     >>>>>>>  client_message_handler(0x80638f0,
> > 0x8077aa0, 0x80614e0)
> > [1137969737.746285]             [CLI] DEBUG: Client message handler
> > called for message "CONNECT"
> > [1137969737.746306]             >>>>>>>  osync_member_connect(0x80625c0,
> > 0xb7ebbd70, 0x8077aa0)
> > [1137969737.746330]                     >>>>>>>
> > client_connect(0x8077e08)
> > [1137969741.853995]                             >>>>>>>
> > osync_context_report_osyncerror(0x8077e08, 0xb6b99244:(No success))
> > [1137969741.854070]                                     [CLI] WARNING:
> > Member is replying with message 0x807ef48 to message 0x8077aa0:"CONNECT"
> > with error 1: No success
> > [1137969741.854106]                             <<<<<<<
> > osync_context_report_osyncerror
> > [1137969741.854126]                     <--- ERROR --- client_connect:
> > No success
> > [1137969741.854145]             <<<<<<<  osync_member_connect
> > [1137969741.854163]     <<<<<<<  client_message_handler
> > 
> > Does anybody have an idea where the problem lies? To start with: is it
> > more likely from the OBEX transport layer or a SyncML related problem?
> > Is there anything I can do to help getting the thing to work?
> > 
> > The only information related to SyncML with my mobile phone I've found
> > up to now is here:
> > 
> > http://www.traud.de/gsm/samsung.htm
> > 
> > I have just e-mailed Samsung about the SyncML version that the SGH-D600
> > is using. Has it already been clarified, how to find the correct values
> > of the XXX_db parameters in the configuration of the syncml-plugin?
> > 
> > Regards,
> > 
> >   Martin
> > 
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
> > for problems?  Stop!  Download the new AJAX search engine that makes
> > searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
> > _______________________________________________
> > Opensync-users mailing list
> > Ope...@li...
> > https://lists.sourceforge.net/lists/listinfo/opensync-users
> > 
> 