Re: [Opensync-users] SyncML Problem

[Armin B. <arm...@de...>]

=C1drian L=EDvio wrote:
> Hi Tanks for your help
>=20
> I can not yet correctly configure the syncml plugin, I'm using the
> configuration file:
>=20
> <config><username>adr</username><password>adr</password><url>/home/adri=
an/adrian/sync2</url><port>8080</port><usestringtable>1</usestringtable><=
onlyreplace>0</onlyreplace><contact_db>addressbook</contact_db><calendar_=
db>calendar</calendar_db><task_db>tasks</task_db></config>
>=20
>=20
> I'm using this url in my client.
> URL: http://150.165.63.210:8080/home/adrian/adrian/sync2/
> Username: adr
> Password: adr
>=20
> Is this configuration correct? Or I need something more than the syncml=

> plugin and the file sync plugin?
>=20
> In the your configuration file you used the url /sync . Where in the
> filesystem this file is located?

This is not a file in the file system. It is just the url that the http
server listens on.

the syncml library that is in trunk/ currently ignores this option and
just accepts every requested path. so this cannot be the cause that the
synchronization does not work.

There are good chances that your phone is not supported by the trunk/
version at the moment since it has to be a syncml 1.2 enabled phone to wo=
rk.

>=20
> Thanks
> --=20
> =C1drian L=EDvio
> Universidade Federal de Campina Grande - UFCG - www.ufcg.edu.br
> <http://www.ufcg.edu.br>
> Centro de Engenharia El=E9trica e Informatica - CEEI
> Unidade Acad=EAmica de Engenharia El=E9trica - UAEE - www.ee.ufcg.edu.b=
r
> <http://www.ee.ufcg.edu.br>
> Laborat=F3rio de Sistemas Embarcados e Computa=E7=E3o Pervasiva -
> www.embeddedacademy.org <http://www.embeddedacademy.org>
>=20
>=20
>     FNORD
> 2006/1/11, Norm Dressler <no...@dr... <mailto:no...@dr...>>:
>=20
>     No, I had no luck but I haven't looked back at it today.
>=20
>     The URL that you give it in the config is what you will point to
>     with your
>     syncml client.  This is my config --
>     <config><username>nd</username><password>nd</password><url>/sync</u=
rl><port>8080</port><usestringtable>1</usestringtable><onlyreplace>0</onl=
yreplace><contact_db>addressbook</contact_db><calendar_db>calendar</calen=
dar_db><task_db>tasks</task_db></config>
>=20
>=20
>     With this config, if my system was called blackhole, I would enter
>     http://blackhole/sync/ as the url to sync to and the port to 8080.
>=20
>     Hopefully that helps.
>=20
>     Norm Dressler
>     Senior Technology Architect
>     DINMAR
>=20
>     On January 11, 2006 04:46 pm, you wrote:
>> Hi Norm,
>>
>>   I'm also trying to use the syncml plugin, do you reach sucess?
>>   May you help me sending me the yours configurations of the plugin, I=

>> already read the guide bud I don't understand  how to configure the
>     plugin
>> url.
>>
>> I'm trying syncronize a Sync4J Outlook client with the opensync plugin=

>>
>> --
>> Thanks
>> =C1drian L=EDvio
>> Universidade Federal de Campina Grande - UFCG - www.ufcg.edu.br
>     <http://www.ufcg.edu.br>
>> Centro de Engenharia El=E9trica e Informatica - CEEI
>> Unidade Acad=EAmica de Engenharia El=E9trica - UAEE -
>     www.ee.ufcg.edu.br <http://www.ee.ufcg.edu.br>
>> Laborat=F3rio de Sistemas Embarcados e Computa=E7=E3o Pervasiva -
>> www.embeddedacademy.org <http://www.embeddedacademy.org>
>>
>>
>>     FNORD
>>
>> 2006/1/9, Norm Dressler <no...@dr... <mailto:no...@dr...>>:
>> > Hi there,
>> >
>> > Installed the latest syncml and evo2 plugins but getting an
>     error.  Here
>> > are the trace files -- can you tell what I'm doing wrong with them?
>> >
>> > Thanks
>> > Norm
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> --=20
> =C1drian L=EDvio
> Universidade Federal de Campina Grande - UFCG - www.ufcg.edu.br
> <http://www.ufcg.edu.br>
> Centro de Engenharia El=E9trica e Informatica - CEEI
> Unidade Acad=EAmica de Engenharia El=E9trica - UAEE - www.ee.ufcg.edu.b=
r
> <http://www.ee.ufcg.edu.br>
> Laborat=F3rio de Sistemas Embarcados e Computa=E7=E3o Pervasiva -
> www.embeddedacademy.org <http://www.embeddedacademy.org>
>=20
>=20
>     FNORD