Re: [Opensync-users] Syncing with Siemens S55

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Aarrrgh....restarting the phone solved the problem.

Rainer

Am Sonntag, 13. Juli 2008 schrieb Rainer Dorsch:
> Hello,
>
> I have a Siemens S55 which I want to sync with opensync, but I get no
> connection to the phone but msynctool hangs:
>
> rd@blackbox:~$ msynctool --sync filefile
> Synchronizing group "filefile"
> The previous synchronization was unclean. Slow-syncing
> Member 1 of type file-sync just connected
> Member 2 of type file-sync just connected
> Member 4 of type kdepim-sync just connected
>
> This is the configuration I use
>
> rd@blackbox:~$ msynctool --showgroup filefile
> Groupname: filefile
> Member 3: irmc-sync
>         Configuration : <config>
>   <connectmedium>bluetooth</connectmedium>
>   <btunit>00:01:E3:17:15:54</btunit>
>   <btchannel>5</btchannel>
> </config>
>
> I can connect to the phone
>
> rd@blackbox:~$ sdptool browse 00:01:E3:17:15:54
> Browsing 00:01:E3:17:15:54 ...
> Service Name: SerialPort
> Service RecHandle: 0x11101
> Service Class ID List:
>   "Serial Port" (0x1101)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 1
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "Serial Port" (0x1101)
>     Version: 0x0100
>
> Service Name: Dial-up networking
> Service RecHandle: 0x11103
> Service Class ID List:
>   "Dialup Networking" (0x1103)
>   "Generic Networking" (0x1201)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 1
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "Dialup Networking" (0x1103)
>     Version: 0x0100
>
> Service Name: Fax
> Service RecHandle: 0x11111
> Service Class ID List:
>   "Fax" (0x1111)
>   "Generic Telephony" (0x1204)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 1
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "Fax" (0x1111)
>     Version: 0x0100
>
> Service Name: OBEX File Transfer
> Service RecHandle: 0x11106
> Service Class ID List:
>   "OBEX File Transfer" (0x1106)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 5
>   "OBEX" (0x0008)
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "OBEX File Transfer" (0x1106)
>     Version: 0x0100
>
> Service Name: OBEX Object Push
> Service RecHandle: 0x11105
> Service Class ID List:
>   "OBEX Object Push" (0x1105)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 4
>   "OBEX" (0x0008)
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "OBEX Object Push" (0x1105)
>     Version: 0x0100
>
> Service Name: OBEX Synchronisation
> Service RecHandle: 0x11104
> Service Class ID List:
>   "IrMC Sync" (0x1104)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 5
>   "OBEX" (0x0008)
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "IrMC Sync" (0x1104)
>     Version: 0x0100
>
> Service Name: Voice gateway
> Service RecHandle: 0x11112
> Service Class ID List:
>   "Headset Audio Gateway" (0x1112)
>   "Generic Audio" (0x1203)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 2
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "Headset" (0x1108)
>     Version: 0x0100
>
> Service Name: Voice gateway
> Service RecHandle: 0x1111f
> Service Class ID List:
>   "Handfree Audio Gateway" (0x111f)
>   "Generic Audio" (0x1203)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 3
> Language Base Attr List:
>   code_ISO639: 0x656e
>   encoding:    0x6a
>   base_offset: 0x100
> Profile Descriptor List:
>   "Handsfree" (0x111e)
>     Version: 0x0100
>
> rd@blackbox:~$
>
>
> Not sure if the hcidump of "msynctool --sync filefile" is useful:
>
>
> hcidump:
> < ACL data: handle 41 flags 0x02 dlen 8
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): DISC: cr 1 dlci 10 pf 1 ilen 0 fcs 0x6d
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 8
>
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): UA: cr 1 dlci 10 pf 1 ilen 0 fcs 0x47
> < ACL data: handle 41 flags 0x02 dlen 8
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 41 flags 0x02 dlen 12
>     L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 12
>
>     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> < HCI Command: Disconnect (0x01|0x0006) plen 3
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Disconn Complete (0x05) plen 4
>
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Connect Complete (0x03) plen 11
>
> < ACL data: handle 41 flags 0x02 dlen 10
>     L2CAP(s): Info req: type 2
> < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Max Slots Change (0x1b) plen 3
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Command Status (0x0f) plen 4
>
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
>
> > HCI Event: Command Complete (0x0e) plen 6
>
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Read Remote Supported Features (0x0b) plen 11
> > ACL data: handle 41 flags 0x02 dlen 12
>
>     L2CAP(s): Info rsp: type 2 result 1
>       Not supported
> < ACL data: handle 41 flags 0x02 dlen 12
>     L2CAP(s): Connect req: psm 3 scid 0x0040
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 16
>
>     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>       Connection successful
> < ACL data: handle 41 flags 0x02 dlen 16
>     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
>       MTU 1013
>
> > HCI Event: Remote Name Req Complete (0x07) plen 255
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 17
> > ACL data: handle 41 flags 0x01 dlen 1
>
>     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
>       MTU 1013
>
> > ACL data: handle 41 flags 0x02 dlen 16
>
>     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
>       MTU 339
> < ACL data: handle 41 flags 0x02 dlen 18
>     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
>       MTU 339
> < ACL data: handle 41 flags 0x02 dlen 8
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 8
>
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 41 flags 0x02 dlen 18
>     L2CAP(d): cid 0x0040 len 14 [psm 3]
>       RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
>       dlci 10 frame_type 0 credit_flow 15 pri 7 ack_timer 0
>       frame_size 334 max_retrans 0 credits 7
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 17
> > ACL data: handle 41 flags 0x01 dlen 1
>
>     L2CAP(d): cid 0x0040 len 14 [psm 3]
>       RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
>       dlci 10 frame_type 0 credit_flow 14 pri 0 ack_timer 0
>       frame_size 334 max_retrans 0 credits 2
> < ACL data: handle 41 flags 0x02 dlen 8
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): SABM: cr 1 dlci 10 pf 1 ilen 0 fcs 0x8c
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Link Key Request (0x17) plen 6
>
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
>
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Encrypt Change (0x08) plen 4
> > ACL data: handle 41 flags 0x02 dlen 8
>
>     L2CAP(d): cid 0x0040 len 4 [psm 3]
>       RFCOMM(s): UA: cr 1 dlci 10 pf 1 ilen 0 fcs 0x47
> < ACL data: handle 41 flags 0x02 dlen 12
>     L2CAP(d): cid 0x0040 len 8 [psm 3]
>       RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
>       dlci 10 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 9
>
> > ACL data: handle 41 flags 0x02 dlen 12
>
>     L2CAP(d): cid 0x0040 len 8 [psm 3]
>       RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
>       dlci 10 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 9
> < ACL data: handle 41 flags 0x02 dlen 12
>     L2CAP(d): cid 0x0040 len 8 [psm 3]
>       RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
>       dlci 10 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 9
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 12
>
>     L2CAP(d): cid 0x0040 len 8 [psm 3]
>       RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
>       dlci 10 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 9
> < ACL data: handle 41 flags 0x02 dlen 9
>     L2CAP(d): cid 0x0040 len 5 [psm 3]
>       RFCOMM(d): UIH: cr 1 dlci 10 pf 1 ilen 0 fcs 0xac credits 33
> < ACL data: handle 41 flags 0x02 dlen 27
>     L2CAP(d): cid 0x0040 len 23 [psm 3]
>       RFCOMM(d): UIH: cr 1 dlci 10 pf 0 ilen 19 fcs 0xb0
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 41 flags 0x02 dlen 17
> > ACL data: handle 41 flags 0x01 dlen 17
>
>     L2CAP(d): cid 0x0040 len 30 [psm 3]
>       RFCOMM(d): UIH: cr 0 dlci 10 pf 1 ilen 24 fcs 0x76 credits 1
> < ACL data: handle 41 flags 0x02 dlen 60
>     L2CAP(d): cid 0x0040 len 56 [psm 3]
>       RFCOMM(d): UIH: cr 1 dlci 10 pf 0 ilen 52 fcs 0xb0
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Mode Change (0x14) plen 6
>
> Any hint what might be wrong is welcome.
>
> Thanks,
> Rainer

-- 
Rainer Dorsch
Lärchenstr. 6
D-72135 Dettenhausen
07157-734133
email: rd...@we...
jabber: rd...@ja...
GPG Fingerprint: 5966 C54C 2B3C 42CC 1F4F  8F59 E3A8 C538 7519 141E
Full GPG key: http://pgp.mit.edu/