opensvcdecoder-support

[Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[George P. <pap...@gm...>]

Hi all,

I've built the OSVCD source code successfully using MS Visual studio 2008
and even 2012 but every time i use it to decode and play any svc video file
it only lasts for 1-2 seconds and then just stops in windows xp or crashes
in windows 7. I can barely see the first frames of the video and usually it
shows a green screen. I've tested the OSVCD on different computers with
different OS using many SVC video files encoded by different encoders.

I've also changed the source code disabling the SDL player and writing the
YUV frames into a file but when i play that file using an external YUV
player the same thing happens showing a green screen and a few frames for
1-2 seconds.

Any help or advice would be very much appreciated!

Thanks in advance!

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[Mickaël R. <Mic...@in...>]

Geroge,

The decoder only supports baseline profile test streams. Did you try those available on sourceforge in the download section? Coud you share the bitstream?
__
Mickaël

Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <pap...@gm...> a écrit :

> Hi all,
> 
> I've built the OSVCD source code successfully using MS Visual studio 2008 and even 2012 but every time i use it to decode and play any svc video file it only lasts for 1-2 seconds and then just stops in windows xp or crashes in windows 7. I can barely see the first frames of the video and usually it shows a green screen. I've tested the OSVCD on different computers with different OS using many SVC video files encoded by different encoders.
> 
> I've also changed the source code disabling the SDL player and writing the YUV frames into a file but when i play that file using an external YUV player the same thing happens showing a green screen and a few frames for 1-2 seconds.
> 
> Any help or advice would be very much appreciated!
> 
> Thanks in advance!
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
> Opensvcdecoder-support mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[George P. <pap...@gm...>]

Mickael,

Thank you very much for the explanation! Indeed that was my problem and now
works fine with the available samples. I've tried some samples encoded by
JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or
had more complicated profiles. Is there any SVC encoder which benefits
better the OSVCD or just have in mind the baseline profile?

Thanks in advance!


2013/7/23 Mickaël Raulet <Mic...@in...>

> Geroge,
>
> The decoder only supports baseline profile test streams. Did you try those
> available on sourceforge in the download section? Coud you share the
> bitstream?
> __
> Mickaël
>
> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <
> pap...@gm...> a écrit :
>
> Hi all,
>
> I've built the OSVCD source code successfully using MS Visual studio 2008
> and even 2012 but every time i use it to decode and play any svc video file
> it only lasts for 1-2 seconds and then just stops in windows xp or crashes
> in windows 7. I can barely see the first frames of the video and usually it
> shows a green screen. I've tested the OSVCD on different computers with
> different OS using many SVC video files encoded by different encoders.
>
> I've also changed the source code disabling the SDL player and writing the
> YUV frames into a file but when i play that file using an external YUV
> player the same thing happens showing a green screen and a few frames for
> 1-2 seconds.
>
> Any help or advice would be very much appreciated!
>
> Thanks in advance!
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
>
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
> Opensvcdecoder-support mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
>
>
>

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[Mickaël R. <Mic...@in...>]

We were using the one from mainconcept and it works perfectly when using main profile. I also checked once the one from Bsoft and it was working fine. Could you share some bitstreams.
__
Mickaël

Le 23 juil. 2013 à 10:53, George Papadogiannopoulos <pap...@gm...> a écrit :

> Mickael,
> 
> Thank you very much for the explanation! Indeed that was my problem and now works fine with the available samples. I've tried some samples encoded by JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or had more complicated profiles. Is there any SVC encoder which benefits better the OSVCD or just have in mind the baseline profile?
> 
> Thanks in advance!
> 
> 
> 2013/7/23 Mickaël Raulet <Mic...@in...>
> Geroge,
> 
> The decoder only supports baseline profile test streams. Did you try those available on sourceforge in the download section? Coud you share the bitstream?
> __
> Mickaël
> 
> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <pap...@gm...> a écrit :
> 
>> Hi all,
>> 
>> I've built the OSVCD source code successfully using MS Visual studio 2008 and even 2012 but every time i use it to decode and play any svc video file it only lasts for 1-2 seconds and then just stops in windows xp or crashes in windows 7. I can barely see the first frames of the video and usually it shows a green screen. I've tested the OSVCD on different computers with different OS using many SVC video files encoded by different encoders.
>> 
>> I've also changed the source code disabling the SDL player and writing the YUV frames into a file but when i play that file using an external YUV player the same thing happens showing a green screen and a few frames for 1-2 seconds.
>> 
>> Any help or advice would be very much appreciated!
>> 
>> Thanks in advance!
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>> Opensvcdecoder-support mailing list
>> Ope...@li...
>> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
> 
> 

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[George P. <pap...@gm...>]

try this one
http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded by
Bsoft. By saying "mainconcept" you mean JSVM from the "Additionnals_tools"?


2013/7/23 George Papadogiannopoulos <pap...@gm...>

> try this one
> http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded
> by Bsoft and the attached file which is encoded by VANGUARD. By saying
> "mainconcept" you mean JSVM from the "Additionnals_tools"?
>
>
> 2013/7/23 Mickaël Raulet <Mic...@in...>
>
>> We were using the one from mainconcept and it works perfectly when using
>> main profile. I also checked once the one from Bsoft and it was working
>> fine. Could you share some bitstreams.
>>  __
>> Mickaël
>>
>> Le 23 juil. 2013 à 10:53, George Papadogiannopoulos <
>> pap...@gm...> a écrit :
>>
>> Mickael,
>>
>> Thank you very much for the explanation! Indeed that was my problem and
>> now works fine with the available samples. I've tried some samples encoded
>> by JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or
>> had more complicated profiles. Is there any SVC encoder which benefits
>> better the OSVCD or just have in mind the baseline profile?
>>
>> Thanks in advance!
>>
>>
>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>>
>>> Geroge,
>>>
>>> The decoder only supports baseline profile test streams. Did you try
>>> those available on sourceforge in the download section? Coud you share the
>>> bitstream?
>>>  __
>>> Mickaël
>>>
>>> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <
>>> pap...@gm...> a écrit :
>>>
>>> Hi all,
>>>
>>> I've built the OSVCD source code successfully using MS Visual studio
>>> 2008 and even 2012 but every time i use it to decode and play any svc video
>>> file it only lasts for 1-2 seconds and then just stops in windows xp or
>>> crashes in windows 7. I can barely see the first frames of the video and
>>> usually it shows a green screen. I've tested the OSVCD on different
>>> computers with different OS using many SVC video files encoded by different
>>> encoders.
>>>
>>> I've also changed the source code disabling the SDL player and writing
>>> the YUV frames into a file but when i play that file using an external YUV
>>> player the same thing happens showing a green screen and a few frames for
>>> 1-2 seconds.
>>>
>>> Any help or advice would be very much appreciated!
>>>
>>> Thanks in advance!
>>>
>>> ------------------------------------------------------------------------------
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>>
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>>> Opensvcdecoder-support mailing list
>>> Ope...@li...
>>> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
>>>
>>>
>>>
>>
>>
>

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[M. R. <mr...@in...>]

mainconcept the company (oops you have to read scalable baseline profile and not main profile). Could you give me more information on the sequence you gave me?
__
Mickaël

Le 23 juil. 2013 à 11:45, George Papadogiannopoulos <pap...@gm...> a écrit :

> try this one http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded by Bsoft. By saying "mainconcept" you mean JSVM from the "Additionnals_tools"?
> 
> 
> 2013/7/23 George Papadogiannopoulos <pap...@gm...>
> try this one http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded by Bsoft and the attached file which is encoded by VANGUARD. By saying "mainconcept" you mean JSVM from the "Additionnals_tools"?
> 
> 
> 2013/7/23 Mickaël Raulet <Mic...@in...>
> We were using the one from mainconcept and it works perfectly when using main profile. I also checked once the one from Bsoft and it was working fine. Could you share some bitstreams.
> __
> Mickaël
> 
> Le 23 juil. 2013 à 10:53, George Papadogiannopoulos <pap...@gm...> a écrit :
> 
>> Mickael,
>> 
>> Thank you very much for the explanation! Indeed that was my problem and now works fine with the available samples. I've tried some samples encoded by JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or had more complicated profiles. Is there any SVC encoder which benefits better the OSVCD or just have in mind the baseline profile?
>> 
>> Thanks in advance!
>> 
>> 
>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>> Geroge,
>> 
>> The decoder only supports baseline profile test streams. Did you try those available on sourceforge in the download section? Coud you share the bitstream?
>> __
>> Mickaël
>> 
>> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <pap...@gm...> a écrit :
>> 
>>> Hi all,
>>> 
>>> I've built the OSVCD source code successfully using MS Visual studio 2008 and even 2012 but every time i use it to decode and play any svc video file it only lasts for 1-2 seconds and then just stops in windows xp or crashes in windows 7. I can barely see the first frames of the video and usually it shows a green screen. I've tested the OSVCD on different computers with different OS using many SVC video files encoded by different encoders.
>>> 
>>> I've also changed the source code disabling the SDL player and writing the YUV frames into a file but when i play that file using an external YUV player the same thing happens showing a green screen and a few frames for 1-2 seconds.
>>> 
>>> Any help or advice would be very much appreciated!
>>> 
>>> Thanks in advance!
>>> ------------------------------------------------------------------------------
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>>> Opensvcdecoder-support mailing list
>>> Ope...@li...
>>> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
>> 
>> 
> 
> 
> 

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[George P. <pap...@gm...>]

Layer 0:
  size: 704x480
  dependency_id = 0
  DQId: 0

Layer 1:
  size: 704x480
  dependency_id = 0
  quality_id = 1
  DQId: 1

, thats all i know


2013/7/23 Mickaël Raulet <mr...@in...>

> mainconcept the company (oops you have to read scalable baseline profile
> and not main profile). Could you give me more information on the sequence
> you gave me?
> __
> Mickaël
>
> Le 23 juil. 2013 à 11:45, George Papadogiannopoulos <
> pap...@gm...> a écrit :
>
> try this one
> http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded
> by Bsoft. By saying "mainconcept" you mean JSVM from the
> "Additionnals_tools"?
>
>
> 2013/7/23 George Papadogiannopoulos <pap...@gm...>
>
>> try this one
>> http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded
>> by Bsoft and the attached file which is encoded by VANGUARD. By saying
>> "mainconcept" you mean JSVM from the "Additionnals_tools"?
>>
>>
>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>>
>>> We were using the one from mainconcept and it works perfectly when using
>>> main profile. I also checked once the one from Bsoft and it was working
>>> fine. Could you share some bitstreams.
>>>  __
>>> Mickaël
>>>
>>> Le 23 juil. 2013 à 10:53, George Papadogiannopoulos <
>>> pap...@gm...> a écrit :
>>>
>>> Mickael,
>>>
>>> Thank you very much for the explanation! Indeed that was my problem and
>>> now works fine with the available samples. I've tried some samples encoded
>>> by JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or
>>> had more complicated profiles. Is there any SVC encoder which benefits
>>> better the OSVCD or just have in mind the baseline profile?
>>>
>>> Thanks in advance!
>>>
>>>
>>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>>>
>>>> Geroge,
>>>>
>>>> The decoder only supports baseline profile test streams. Did you try
>>>> those available on sourceforge in the download section? Coud you share the
>>>> bitstream?
>>>>  __
>>>> Mickaël
>>>>
>>>> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <
>>>> pap...@gm...> a écrit :
>>>>
>>>> Hi all,
>>>>
>>>> I've built the OSVCD source code successfully using MS Visual studio
>>>> 2008 and even 2012 but every time i use it to decode and play any svc video
>>>> file it only lasts for 1-2 seconds and then just stops in windows xp or
>>>> crashes in windows 7. I can barely see the first frames of the video and
>>>> usually it shows a green screen. I've tested the OSVCD on different
>>>> computers with different OS using many SVC video files encoded by different
>>>> encoders.
>>>>
>>>> I've also changed the source code disabling the SDL player and writing
>>>> the YUV frames into a file but when i play that file using an external YUV
>>>> player the same thing happens showing a green screen and a few frames for
>>>> 1-2 seconds.
>>>>
>>>> Any help or advice would be very much appreciated!
>>>>
>>>> Thanks in advance!
>>>>
>>>> ------------------------------------------------------------------------------
>>>> See everything from the browser to the database with AppDynamics
>>>> Get end-to-end visibility with application monitoring from AppDynamics
>>>> Isolate bottlenecks and diagnose root cause in seconds.
>>>> Start your free trial of AppDynamics Pro today!
>>>>
>>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>>>> Opensvcdecoder-support mailing list
>>>> Ope...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
>>>>
>>>>
>>>>
>>>
>>>
>>
>
>

Re: [Opensvcdecoder-support] OSVCD works only for 1-2 sec for any svc video

[George P. <pap...@gm...>]

maybe this one http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/eusipco/is
more accurate according to the above information


2013/7/23 George Papadogiannopoulos <pap...@gm...>

> Layer 0:
>   size: 704x480
>   dependency_id = 0
>   DQId: 0
>
> Layer 1:
>   size: 704x480
>   dependency_id = 0
>   quality_id = 1
>   DQId: 1
>
> , thats all i know
>
>
> 2013/7/23 Mickaël Raulet <mr...@in...>
>
>> mainconcept the company (oops you have to read scalable baseline profile
>> and not main profile). Could you give me more information on the sequence
>> you gave me?
>>  __
>> Mickaël
>>
>> Le 23 juil. 2013 à 11:45, George Papadogiannopoulos <
>> pap...@gm...> a écrit :
>>
>> try this one
>> http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/ encoded
>> by Bsoft. By saying "mainconcept" you mean JSVM from the
>> "Additionnals_tools"?
>>
>>
>> 2013/7/23 George Papadogiannopoulos <pap...@gm...>
>>
>>> try this one
>>> http://www-itec.uni-klu.ac.at/~cmueller/BSoft/data/bunny480_new/encoded by Bsoft and the attached file which is encoded by VANGUARD. By
>>> saying "mainconcept" you mean JSVM from the "Additionnals_tools"?
>>>
>>>
>>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>>>
>>>> We were using the one from mainconcept and it works perfectly when
>>>> using main profile. I also checked once the one from Bsoft and it was
>>>> working fine. Could you share some bitstreams.
>>>>  __
>>>> Mickaël
>>>>
>>>> Le 23 juil. 2013 à 10:53, George Papadogiannopoulos <
>>>> pap...@gm...> a écrit :
>>>>
>>>> Mickael,
>>>>
>>>> Thank you very much for the explanation! Indeed that was my problem and
>>>> now works fine with the available samples. I've tried some samples encoded
>>>> by JSVM, VANGUARD and Bsoft encoders but i guess that were not supported or
>>>> had more complicated profiles. Is there any SVC encoder which benefits
>>>> better the OSVCD or just have in mind the baseline profile?
>>>>
>>>> Thanks in advance!
>>>>
>>>>
>>>> 2013/7/23 Mickaël Raulet <Mic...@in...>
>>>>
>>>>> Geroge,
>>>>>
>>>>> The decoder only supports baseline profile test streams. Did you try
>>>>> those available on sourceforge in the download section? Coud you share the
>>>>> bitstream?
>>>>>  __
>>>>> Mickaël
>>>>>
>>>>> Le 22 juil. 2013 à 13:08, George Papadogiannopoulos <
>>>>> pap...@gm...> a écrit :
>>>>>
>>>>> Hi all,
>>>>>
>>>>> I've built the OSVCD source code successfully using MS Visual studio
>>>>> 2008 and even 2012 but every time i use it to decode and play any svc video
>>>>> file it only lasts for 1-2 seconds and then just stops in windows xp or
>>>>> crashes in windows 7. I can barely see the first frames of the video and
>>>>> usually it shows a green screen. I've tested the OSVCD on different
>>>>> computers with different OS using many SVC video files encoded by different
>>>>> encoders.
>>>>>
>>>>> I've also changed the source code disabling the SDL player and writing
>>>>> the YUV frames into a file but when i play that file using an external YUV
>>>>> player the same thing happens showing a green screen and a few frames for
>>>>> 1-2 seconds.
>>>>>
>>>>> Any help or advice would be very much appreciated!
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> See everything from the browser to the database with AppDynamics
>>>>> Get end-to-end visibility with application monitoring from AppDynamics
>>>>> Isolate bottlenecks and diagnose root cause in seconds.
>>>>> Start your free trial of AppDynamics Pro today!
>>>>>
>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>>>>> Opensvcdecoder-support mailing list
>>>>> Ope...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/opensvcdecoder-support
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>