opensipstack-osbcdevel

[OpenSBC] How do I configure things to get inbound calls?

[OpenSBC F. <ope...@op...>]

Greetings - How do I configure things to get inbound calls on a SipXecs/OpenSBC box?  I've got SipXecs and OpenSBC on the same box with one NIC using Upper Registration and I am able to make outgoing calls.  However, I'm not able to take incoming calls.  Judging from the logs, the incoming calls never touch OpenSBC and go straight to SipXecs looking like 999...@ex... and SipXecs is unable to handle them properly.  Is there something I can do to force the calls to OpenSBC first? 


 


Thanks.


 


radp1399 

Re: [OpenSBC] How do I configure things to get inbound calls?

[OpenSBC F. <ope...@op...>]

hi,


   I would assume that this is from PSTN --> OSBC --> Sipx, if this is the case, point your DID number to your OSBC then from OSBC create a route going to sipx.


 ex.


DID number(123456789) --> OSBC (route would be, [sip:123456789*] sip:10...@si... ) -->SipX


 with the example above, when an incoming call is received by the DID number, it will go to osbc then applied the specified route,which is going to sipx AA (as implied by 100 ext),        


 raymund