Thread: [OpenSBC] OpenSBC Registration
Brought to you by:
joegenbaclor
Menu
▾
▴
opensipstack-osbcdevel
|
From: adams <ada...@gm...> - 2008-01-24 19:28:26
|
Hi, I'm trying to setup OpenSBC as a B2BUA between a sip provider (voipcheap) a= nd sipX. I configured OpenSBC using the manual in [http://www.opensourcesip.org:8080= /clearspacex/docs/DOC-1040|d-1040] but OpenSBC doesn't register. When the requests arrive the OpenSBC, it starts sending INVITEs before regi= stering with the provider. I can't get the configuration right. This is my current configuration: OpenSBC General Parameters {code:java} SBC Mode: B2B Only Mode {code} {code:java} Interface Address: sip:*:9000 {code} Trusted Domains {code:java} Accept All Calls: V {code} Local Domain Accounts {code:java} Accept All Registration: V {code} B2BUA Routes=20 {code:java} Route: [sip:*] sip:voipcheap.com {code} SIP Trunk Config: =ABsiptrunk trunk-name=3D"voipcheap.com" route-set=3D"sip.voipcheap.com" si= p-domain=3D"voipcheap.com" expires=3D"10"=BB =ABtrunk-accounts=BB =ABaccount user-name=3D"**username**" auth-user-name=3D"**username**" auth-= password=3D"**password**" inboundroute=3D"sip:XXX@**internal.sip.domain**" = expires=3D"3600" /=BB =AB/trunk-accounts=BB =AB/siptrunk=BB > the sip trunk config is correctly escaped with the xml characters instead= of « and », I couldn't paste here those characters=20 Thank you adams |
|
From: Joegen E. B. <joe...@gm...> - 2008-01-25 03:15:03
|
Make sure you have a <root> </root> enclosing your XML adams wrote: > Hi, > > I'm trying to setup OpenSBC as a B2BUA between a sip provider (voipchea= p) and sipX. > > I configured OpenSBC using the manual in [http://www.opensourcesip.org:= 8080/clearspacex/docs/DOC-1040|d-1040] but OpenSBC doesn't register. > When the requests arrive the OpenSBC, it starts sending INVITEs before = registering with the provider. > > I can't get the configuration right. > This is my current configuration: > > OpenSBC General Parameters > {code:java} > SBC Mode: B2B Only Mode > {code} > {code:java} > Interface Address: sip:*:9000 > {code} > > Trusted Domains > {code:java} > Accept All Calls: V > {code} > > Local Domain Accounts > {code:java} > Accept All Registration: V > {code} > > B2BUA Routes=20 > {code:java} > Route: [sip:*] sip:voipcheap.com > {code} > > SIP Trunk Config: > =ABsiptrunk trunk-name=3D"voipcheap.com" route-set=3D"sip.voipcheap.com= " sip-domain=3D"voipcheap.com" expires=3D"10"=BB > =ABtrunk-accounts=BB > =ABaccount user-name=3D"**username**" auth-user-name=3D"**username**" a= uth-password=3D"**password**" inboundroute=3D"sip:XXX@**internal.sip.doma= in**" expires=3D"3600" /=BB > =AB/trunk-accounts=BB > =AB/siptrunk=BB > > > =20 >> the sip trunk config is correctly escaped with the xml characters inst= ead of « and », I couldn't paste here those characters=20 >> =20 > > Thank you > > adams > > -----------------------------------------------------------------------= -- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Opensipstack-osbcdevel mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel > > > =20 |
|
From: syfaure <sy...@gm...> - 2008-01-28 21:26:43
|
Hi, I try to implement a OpenSBC in an IMS core like http://www.openimscore.org/. I can register my client on the IMS but It's impossible to create a call. Kind regards, |
|
From: Joegen E. B. <joe...@gm...> - 2008-01-29 01:19:55
|
If you are expecting an answer as to why you are not successful with the call, you need to provide more information like version of the opensbc, Configuration and Level 5 logs. Packet captures are always nice. Joegen syfaure wrote: > Hi, > > I try to implement a OpenSBC in an IMS core like > http://www.openimscore.org/. > > I can register my client on the IMS but It's impossible to create a call. > > Kind regards, > > > > > > |
|
From: <sa...@ER...> - 2008-01-31 21:19:47
|
Hi Joegen Is there a relatonship between the Media trunk port setting in the Transport Status and the the General parameters Stack RPT Media Address in ? I noticed that Main, Backup, CALEA, SIP Trunk and Media are all running on differenct ports. Is there a doc that explaiins this thinking? Warren Kreckler ----- Original Message ----- From: "Joegen E. Baclor" <joe...@gm...> To: "syfaure" <sy...@gm...> Cc: <ope...@li...> Sent: Monday, January 28, 2008 7:19 PM Subject: Re: [OpenSBC] OpenSBC Registration > If you are expecting an answer as to why you are not successful with the > call, you need to provide more information like version of the opensbc, > Configuration and Level 5 logs. Packet captures are always nice. > > Joegen > > syfaure wrote: > > Hi, > > > > I try to implement a OpenSBC in an IMS core like > > http://www.openimscore.org/. > > > > I can register my client on the IMS but It's impossible to create a call. > > > > Kind regards, > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Opensipstack-osbcdevel mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel > |
|
From: Joegen E. B. <joe...@gm...> - 2008-02-02 12:50:53
|
sales@ER wrote: > Hi Joegen > > Is there a relatonship between the Media trunk port setting in the Transport > Status and the the General parameters Stack RPT Media Address in ? No. RTP Media address started as a hack around hosted servers that has a private IP address but with a 1 to 1 public mapping. One good example is the amazon cloud. > I > noticed that Main, Backup, CALEA, SIP Trunk and Media are all running on > differenct ports. Is there a doc that explaiins this thinking? > Each user agent has it's own transport. Since these UA behave differently than the other, we can't really mix messages using a single transport and multiplex each message and sort them according to UA assignment. I am not saying it's an impossibility. I am saying the job of the multiplexer will be heavy. Thus we arrived at a design decision to use one transport per specialized UA. > Warren Kreckler > > > > ----- Original Message ----- > From: "Joegen E. Baclor" <joe...@gm...> > To: "syfaure" <sy...@gm...> > Cc: <ope...@li...> > Sent: Monday, January 28, 2008 7:19 PM > Subject: Re: [OpenSBC] OpenSBC Registration > > > >> If you are expecting an answer as to why you are not successful with the >> call, you need to provide more information like version of the opensbc, >> Configuration and Level 5 logs. Packet captures are always nice. >> >> Joegen >> >> syfaure wrote: >> >>> Hi, >>> >>> I try to implement a OpenSBC in an IMS core like >>> http://www.openimscore.org/. >>> >>> I can register my client on the IMS but It's impossible to create a >>> > call. > >>> Kind regards, >>> >>> >>> >>> >>> >>> >>> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Opensipstack-osbcdevel mailing list >> Ope...@li... >> https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel >> >> > > > > > |
|
From: Hikmet C. <hik...@ve...> - 2008-01-30 19:10:44
|
How can we get the level 5 trace under windows environment? All I can see is the sip.log file and the event related messages dumped to the command window. (Referencing ATLSIPLib.dll in c# console application) I'm using Win XP and VStudio 2005. Thanks much. |
|
From: Ilian J. C. P. <ip...@so...> - 2008-01-31 03:49:25
|
Hi, I think you're talking about ATLSIP so we're in the wrong thread. Anyway, in SoftPhoneManager::Initialise() change PTrace::SetLevel( 3 ); to PTrace::SetLevel( 5 );. The logs will be dumped in sip.log. Regards, Ilian Hikmet Cengiz wrote: > How can we get the level 5 trace under windows environment? > > > All I can see is the sip.log file and the event related messages dumped to the command window. (Referencing ATLSIPLib.dll in c# console application) I'm using Win XP and VStudio 2005. > > > Thanks much. > > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Opensipstack-osbcdevel mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel > > > |
Thanks for helping keep SourceForge clean.
X