Thread: [OpenSIPStack] sipXecs and openSBC
Brought to you by:
joegenbaclor
Menu
▾
▴
opensipstack-devel
|
From: voice <vo...@ne...> - 2007-08-22 20:59:17
|
Hi I have setup a sipXecs box and a standalone openSBC box. i want to use the sipX 'SIP Trunk' Gateway to define and point to = openSBC from sipX. My goal is to use sipX to register USERS and PHONES and to use openSBC = to pass SiP traffic to remote SBC, which will handle DID < =3D=3D > PSTN ATA <=3D=3D> sipX <=3D=3D> openSBC <=3D=3D> SBC/PSTN Can this be done with openSBC in the middle? How do i set up openSBC to do 'SIP egress and ingress TRUNKing'? |
|
From: Joegen E. B. <joe...@gm...> - 2007-08-23 01:52:33
|
voice wrote: > Hi > > I have setup a sipXecs box and a standalone openSBC box. > > i want to use the sipX 'SIP Trunk' Gateway to define and point to openSBC from sipX. > > My goal is to use sipX to register USERS and PHONES and to use openSBC to pass SiP traffic to remote SBC, which will handle DID < == > PSTN > > ATA <==> sipX <==> openSBC <==> SBC/PSTN > > Can this be done with openSBC in the middle? > > How do i set up openSBC to do 'SIP egress and ingress TRUNKing'? > If you are pertaining to the SIP Trunking being discussed in the sipX user list, then this functionality is not yet complete. However, OpenSBC can already be used for basic trunking needs like traversing NAT and routing to your carrier as a B2BUA. If your carrier needs to do a separate authentication, then you must wait till I announce the trunking feature completion. This will happen soon so watch this space. |
|
From: voice <vo...@ne...> - 2008-10-25 18:32:04
|
Hi Joegen I'ts been over 14 months now. Have you guys completed testing the Pingtel/sipX PBX and removing the SIP Trunk registration requiement? I believe your sip trunk feature was forcing registration via username/password, which cause some SIP Trunk provider to choke on. r ----- Original Message ----- From: "Joegen E. Baclor" <joe...@gm...> To: <ope...@li...> Sent: Wednesday, August 22, 2007 8:52 PM Subject: Re: [OpenSIPStack] sipXecs and openSBC > voice wrote: > > Hi > > > > I have setup a sipXecs box and a standalone openSBC box. > > > > i want to use the sipX 'SIP Trunk' Gateway to define and point to openSBC from sipX. > > > > My goal is to use sipX to register USERS and PHONES and to use openSBC to pass SiP traffic to remote SBC, which will handle DID < == > PSTN > > > > ATA <==> sipX <==> openSBC <==> SBC/PSTN > > > > Can this be done with openSBC in the middle? > > > > How do i set up openSBC to do 'SIP egress and ingress TRUNKing'? > > > > > If you are pertaining to the SIP Trunking being discussed in the sipX > user list, then this functionality is not yet complete. However, > OpenSBC can already be used for basic trunking needs like traversing NAT > and routing to your carrier as a B2BUA. If your carrier needs to do a > separate authentication, then you must wait till I announce the > trunking feature completion. This will happen soon so watch this space. > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > opensipstack-devel mailing list > ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel |
|
From: <jo...@op...> - 2008-10-26 01:58:53
|
Hi Voice, I have already responded to the thread you have opened in the sipx mailing list. This is better discussed there. I am not a (direct) user of sipx myself so I would rather bring this discussion there so that people who do know sipx first hand can comment. Joegen voice wrote: > Hi Joegen > > I'ts been over 14 months now. Have you guys completed testing the > Pingtel/sipX PBX and removing the SIP Trunk registration requiement? I > believe your sip trunk feature was forcing registration via > username/password, which cause some SIP Trunk provider to choke on. > > r > > > ----- Original Message ----- > From: "Joegen E. Baclor" <joe...@gm...> > To: <ope...@li...> > Sent: Wednesday, August 22, 2007 8:52 PM > Subject: Re: [OpenSIPStack] sipXecs and openSBC > > > >> voice wrote: >> >>> Hi >>> >>> I have setup a sipXecs box and a standalone openSBC box. >>> >>> i want to use the sipX 'SIP Trunk' Gateway to define and point to >>> > openSBC from sipX. > >>> My goal is to use sipX to register USERS and PHONES and to use openSBC >>> > to pass SiP traffic to remote SBC, which will handle DID < == > PSTN > >>> ATA <==> sipX <==> openSBC <==> SBC/PSTN >>> >>> Can this be done with openSBC in the middle? >>> >>> How do i set up openSBC to do 'SIP egress and ingress TRUNKing'? >>> >>> >> If you are pertaining to the SIP Trunking being discussed in the sipX >> user list, then this functionality is not yet complete. However, >> OpenSBC can already be used for basic trunking needs like traversing NAT >> and routing to your carrier as a B2BUA. If your carrier needs to do a >> separate authentication, then you must wait till I announce the >> trunking feature completion. This will happen soon so watch this space. >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Splunk Inc. >> Still grepping through log files to find problems? Stop. >> Now Search log events and configuration files using AJAX and a browser. >> Download your FREE copy of Splunk now >> http://get.splunk.com/ >> _______________________________________________ >> opensipstack-devel mailing list >> ope...@li... >> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel >> > > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > opensipstack-devel mailing list > ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.175 / Virus Database: 270.8.3/1746 - Release Date: 10/25/2008 5:55 PM > > |
|
From: voice <vo...@ne...> - 2007-08-25 19:55:24
|
Hi Joegen Terminology is reality. My PSTN provider provides an ipaddr on the internet. I am calling this a SIP Trunk gateway. It expects no SBC or encryption just plain everyday SIP from me. They use peer-to-peer IP addressing for security. So this setup may not fit neatly within the definition of 'SIP Trucking'. Sipx clearly can't help me. So i am turning to openSBC as a possible solution. I will point the sipX 'sip trunk' to my opensbc box and setup the openSBC to handle the sip protocol. Anyway i'm in the experimental business at the moment so i have nothing to loose. r ----- Original Message ----- From: "Joegen E. Baclor" <joe...@gm...> To: <ope...@li...> Sent: Wednesday, August 22, 2007 8:52 PM Subject: Re: [OpenSIPStack] sipXecs and openSBC > voice wrote: > > Hi > > > > I have setup a sipXecs box and a standalone openSBC box. > > > > i want to use the sipX 'SIP Trunk' Gateway to define and point to openSBC from sipX. > > > > My goal is to use sipX to register USERS and PHONES and to use openSBC to pass SiP traffic to remote SBC, which will handle DID < == > PSTN > > > > ATA <==> sipX <==> openSBC <==> SBC/PSTN > > > > Can this be done with openSBC in the middle? > > > > How do i set up openSBC to do 'SIP egress and ingress TRUNKing'? > > > > > If you are pertaining to the SIP Trunking being discussed in the sipX > user list, then this functionality is not yet complete. However, > OpenSBC can already be used for basic trunking needs like traversing NAT > and routing to your carrier as a B2BUA. If your carrier needs to do a > separate authentication, then you must wait till I announce the > trunking feature completion. This will happen soon so watch this space. > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > opensipstack-devel mailing list > ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X