Thread: [OpenSIPStack] Call back for an Invite Response in the Test application

Brought to you by: joegenbaclor

opensipstack-devel

[OpenSIPStack] Call back for an Invite Response in the Test application

From: Jyothsna B. <jyo...@gm...> - 2009-04-01 09:53:30

Hi,

I have tried two scenarios for sending an Invite Request:

First Scenario:

Iam sending an Invite request thru test application  to SJPhone running on
another machine.

receiving the 200 Ok from Sjphone to test application. Where will we get the
call back in Test application, so that we can send an Ack for the 200 ok
response.

Second Scenario:

when sending the Invite message from test application to OpensipStack server
running on the other message,
getting the 100 Trying call back in the test application Onreceived
message.Here how to send the 200 ok response from test application acting as
a user agent server.Also how to set the test application as User Agent
server?



Can any one please help.

Br,
Jyothsna

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Joegen B. <joe...@gm...> - 2009-04-01 11:44:50

Can you publish the test application code?  I want to see how you are 
sending the INVITE out so we have something in common to look at. 
Tools/TestRegistration sample application in OpenSBC demonstrates pretty 
basic transaction callbacks.  You might want to start with that as well.


--------------------------------------------------
From: "Jyothsna Banda" <jyo...@gm...>
Sent: Wednesday, April 01, 2009 5:53 PM
To: <ope...@li...>
Subject: [OpenSIPStack] Call back for an Invite Response in the 
Testapplication

> Hi,
>
> I have tried two scenarios for sending an Invite Request:
>
> First Scenario:
>
> Iam sending an Invite request thru test application  to SJPhone running on
> another machine.
>
> receiving the 200 Ok from Sjphone to test application. Where will we get 
> the
> call back in Test application, so that we can send an Ack for the 200 ok
> response.
>
> Second Scenario:
>
> when sending the Invite message from test application to OpensipStack 
> server
> running on the other message,
> getting the 100 Trying call back in the test application Onreceived
> message.Here how to send the 200 ok response from test application acting 
> as
> a user agent server.Also how to set the test application as User Agent
> server?
>
>
>
> Can any one please help.
>
> Br,
> Jyothsna
> ------------------------------------------------------------------------------
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel



>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09 
> 13:05:00
>

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Jyothsna B. <jyo...@gm...> - 2009-04-01 15:48:09

Hi Joegen,

Thanks for the reply.

Iam using the same test registration application.

Scenario: Sending Invite from Testapplication to SJPhone(running in another
system)

I have added few methods in Register Class for Invite,ACK and 200_OK.

Instead of sending the Registration ,iam calling the Invite method which i
have added.

Find the attached Source file and XML ,reading the values from this file.

Now iam getting call back (200OK)to onreceived message,there iam preparing
the ACK and sending back.but ACk is not going.

Please check the code and let me know whether iam doing something wrong .

Br,
Jyothsna





On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...>wrote:

> Can you publish the test application code?  I want to see how you are
> sending the INVITE out so we have something in common to look at.
> Tools/TestRegistration sample application in OpenSBC demonstrates pretty
> basic transaction callbacks.  You might want to start with that as well.
>
>
> --------------------------------------------------
> From: "Jyothsna Banda" <jyo...@gm...>
> Sent: Wednesday, April 01, 2009 5:53 PM
> To: <ope...@li...>
> Subject: [OpenSIPStack] Call back for an Invite Response in the
> Testapplication
>
> > Hi,
> >
> > I have tried two scenarios for sending an Invite Request:
> >
> > First Scenario:
> >
> > Iam sending an Invite request thru test application  to SJPhone running
> on
> > another machine.
> >
> > receiving the 200 Ok from Sjphone to test application. Where will we get
> > the
> > call back in Test application, so that we can send an Ack for the 200 ok
> > response.
> >
> > Second Scenario:
> >
> > when sending the Invite message from test application to OpensipStack
> > server
> > running on the other message,
> > getting the 100 Trying call back in the test application Onreceived
> > message.Here how to send the 200 ok response from test application acting
> > as
> > a user agent server.Also how to set the test application as User Agent
> > server?
> >
> >
> >
> > Can any one please help.
> >
> > Br,
> > Jyothsna
> >
> ------------------------------------------------------------------------------
> > _______________________________________________
> > opensipstack-devel mailing list
> > ope...@li...
> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>
>
>
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
> 03/31/09
> > 13:05:00
> >
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Joegen B. <joe...@gm...> - 2009-04-02 00:33:48

Ahhh, I see what you are doing wrong.  You don't use FindTransactionAndAddEvent() to send ACK because ACK never creates a transaction.   Instead you must use GetStack().EnqueueTransportWriteEvent( ack );
Look at BOOL CallSession::SendAck( const SIPMessage & response, const SIPMessage & sdp ) for a sample implementation.
HTH,

Joegen

From: Jyothsna Banda 
Sent: Wednesday, April 01, 2009 8:41 PM
To: Joegen Baclor ; ope...@li... 
Subject: Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

Hi Joegen,

Thanks for the reply.

Iam using the same test registration application.

Scenario: Sending Invite from Testapplication to SJPhone(running in another system)

I have added few methods in Register Class for Invite,ACK and 200_OK.

Instead of sending the Registration ,iam calling the Invite method which i have added.

Find the attached Source file and XML ,reading the values from this file.

Now iam getting call back (200OK)to onreceived message,there iam preparing the ACK and sending back.but ACk is not going.

Please check the code and let me know whether iam doing something wrong .

Br,
Jyothsna

On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...> wrote:

  Can you publish the test application code?  I want to see how you are
  sending the INVITE out so we have something in common to look at.
  Tools/TestRegistration sample application in OpenSBC demonstrates pretty
  basic transaction callbacks.  You might want to start with that as well.

  --------------------------------------------------
  From: "Jyothsna Banda" <jyo...@gm...>
  Sent: Wednesday, April 01, 2009 5:53 PM
  To: <ope...@li...>
  Subject: [OpenSIPStack] Call back for an Invite Response in the
  Testapplication

  > Hi,
  >
  > I have tried two scenarios for sending an Invite Request:
  >
  > First Scenario:
  >
  > Iam sending an Invite request thru test application  to SJPhone running on
  > another machine.
  >
  > receiving the 200 Ok from Sjphone to test application. Where will we get
  > the
  > call back in Test application, so that we can send an Ack for the 200 ok
  > response.
  >
  > Second Scenario:
  >
  > when sending the Invite message from test application to OpensipStack
  > server
  > running on the other message,
  > getting the 100 Trying call back in the test application Onreceived
  > message.Here how to send the 200 ok response from test application acting
  > as
  > a user agent server.Also how to set the test application as User Agent
  > server?
  >
  >
  >
  > Can any one please help.
  >
  > Br,
  > Jyothsna

  > ------------------------------------------------------------------------------
  > _______________________________________________
  > opensipstack-devel mailing list
  > ope...@li...
  > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel

  >
  > No virus found in this incoming message.
  > Checked by AVG - www.avg.com
  > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09
  > 13:05:00
  >

  ------------------------------------------------------------------------------
  _______________________________________________
  opensipstack-devel mailing list
  ope...@li...
  https://lists.sourceforge.net/lists/listinfo/opensipstack-devel

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09 13:05:00

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Jyothsna B. <jyo...@gm...> - 2009-04-02 05:41:56

Hi Joegen,

Thanks again for the quick response.

By using that method iam sending the ACK,in wireshark it is showing ,but the
SJphone is not receiving the ACK message? check the below sample code how
iam sending from the test application.

/*********** sample code ***********/


OStringStream msg;

msg << "ACK " << "sip:" << m_Domain <<":"<<"5060"<< " SIP/2.0" << "\r\n";

msg << "From: <sip:" << m_ListenerIP<< ">" << ";tag=" <<
ParserTools::GenTagParameter() << "\r\n";

msg << "To: <sip:" << m_ToUser << m_Domain << ">" << "\r\n";

msg << "Contact: " << "<" << m_ContactURI << ">" << "\r\n";

msg << "Via:" << "SIP/2.0/UDP " << m_ListenerIP <<";branch=" <<
ParserTools::GenBranchParameter() << "\r\n";

msg << "CSeq: 1 ACK" << "\r\n";

msg << "Max-Forwards:" << "70" << "\r\n";

msg << "Call-ID: " << ParserTools::GenGUID() << "\r\n";

msg << "Content-Length: 0" <<"\r\n";

Parse( msg.str() );

TransactionId tid;

m_UA->GetStack().EnqueueTransportWriteEvent(*this);
/************************************************************************/
Can we use call session from test application,How to call the call session
methods?

where it is being used?

i think call session is having full functionality for call establishment?


Can u tell me the code flow for eatblishing a call from my test application?


Br,
Jyothsna
On Thu, Apr 2, 2009 at 6:03 AM, Joegen Baclor <joe...@gm...>wrote:

>  Ahhh, I see what you are doing wrong.  You don’t use
> FindTransactionAndAddEvent() to send ACK because ACK never creates a
> transaction.   Instead you must use GetStack().EnqueueTransportWriteEvent(
> ack );
> Look at BOOL CallSession::SendAck( const SIPMessage & response, constSIPMessage & sdp ) for a sample implementation.
>
> HTH,
>
> Joegen
>
>  *From:* Jyothsna Banda <jyo...@gm...>
> *Sent:* Wednesday, April 01, 2009 8:41 PM
> *To:* Joegen Baclor <jb...@so...> ;
> ope...@li...
> *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
> Testapplication
>
>
> Hi Joegen,
>
> Thanks for the reply.
>
> Iam using the same test registration application.
>
> Scenario: Sending Invite from Testapplication to SJPhone(running in another
> system)
>
> I have added few methods in Register Class for Invite,ACK and 200_OK.
>
> Instead of sending the Registration ,iam calling the Invite method which i
> have added.
>
> Find the attached Source file and XML ,reading the values from this file.
>
> Now iam getting call back (200OK)to onreceived message,there iam preparing
> the ACK and sending back.but ACk is not going.
>
> Please check the code and let me know whether iam doing something wrong .
>
> Br,
> Jyothsna
>
>
>
>
>
> On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...>wrote:
>
>> Can you publish the test application code?  I want to see how you are
>> sending the INVITE out so we have something in common to look at.
>> Tools/TestRegistration sample application in OpenSBC demonstrates pretty
>> basic transaction callbacks.  You might want to start with that as well.
>>
>>
>> --------------------------------------------------
>> From: "Jyothsna Banda" <jyo...@gm...>
>> Sent: Wednesday, April 01, 2009 5:53 PM
>> To: <ope...@li...>
>> Subject: [OpenSIPStack] Call back for an Invite Response in the
>> Testapplication
>>
>> > Hi,
>> >
>> > I have tried two scenarios for sending an Invite Request:
>> >
>> > First Scenario:
>> >
>> > Iam sending an Invite request thru test application  to SJPhone running
>> on
>> > another machine.
>> >
>> > receiving the 200 Ok from Sjphone to test application. Where will we get
>> > the
>> > call back in Test application, so that we can send an Ack for the 200 ok
>> > response.
>> >
>> > Second Scenario:
>> >
>> > when sending the Invite message from test application to OpensipStack
>> > server
>> > running on the other message,
>> > getting the 100 Trying call back in the test application Onreceived
>> > message.Here how to send the 200 ok response from test application
>> acting
>> > as
>> > a user agent server.Also how to set the test application as User Agent
>> > server?
>> >
>> >
>> >
>> > Can any one please help.
>> >
>> > Br,
>> > Jyothsna
>> >
>> ------------------------------------------------------------------------------
>> > _______________________________________________
>> > opensipstack-devel mailing list
>> > ope...@li...
>> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>
>>
>>
>> >
>> > No virus found in this incoming message.
>> > Checked by AVG - www.avg.com
>> > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>> 03/31/09
>> > 13:05:00
>> >
>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> opensipstack-devel mailing list
>> ope...@li...
>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>
>
>  ------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09
> 13:05:00
>
>

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Jyothsna B. <jyo...@gm...> - 2009-04-02 07:24:40

Hi Joegen,

If i send the message in the below way,if we chekc in th wireshar ACK
message is having
CSeq as 1 INVITE only.

so what i did is:


Send_ACK(const SIPMessage & message)

{

SIPMessage ack;

SIPMessage sdp;

const Via & via = message.GetTopVia();

OString branch = via.GetBranch();

if( sdp.HasSDP() )

{

ack.SetBody( sdp.GetBody() );

}

ack.SetInterfaceAddress(via.GetAddress());

ack.SetInterfacePort(via.GetPort());

CSeq cseq;

cseq.SetMethod( "ACK" );

cseq.SetSequence( message.GetCSeqNumber() );

ack.SetCSeq( cseq );

if( message.GetTransaction() != NULL )

{

SIPFSM::InviteClientTransaction * trn = dynamic_cast
<SIPFSM::InviteClientTransaction*>(message.GetTransaction());

if( trn != NULL )

trn->SetFinalACK( ack );

}

m_UA->GetStack().EnqueueTransportWriteEvent(ack);

}

but when i debug the code internally in the EnqueueTransportWriteEvent(),it
is calling SIPMessage method ProcessOutBound there it is cleaning all the
message varaibles and deleting the event.so the message is not at all going
from one to the other end.

How to proceed further?Please can u look in to this?


Br,
Jyothsna
On Thu, Apr 2, 2009 at 11:11 AM, Jyothsna Banda <jyo...@gm...>wrote:

> Hi Joegen,
>
> Thanks again for the quick response.
>
> By using that method iam sending the ACK,in wireshark it is showing ,but
> the SJphone is not receiving the ACK message? check the below sample code
> how iam sending from the test application.
>
> /*********** sample code ***********/
>
>
> OStringStream msg;
>
> msg <<
> "ACK " << "sip:" << m_Domain <<":"<<"5060"<< " SIP/2.0" << "\r\n";
>
> msg <<
> "From: <sip:" << m_ListenerIP<< ">" << ";tag=" <<
> ParserTools::GenTagParameter() << "\r\n";
>
> msg <<
> "To: <sip:" << m_ToUser << m_Domain << ">" << "\r\n";
>
> msg <<
> "Contact: " << "<" << m_ContactURI << ">" << "\r\n";
>
> msg <<
> "Via:" << "SIP/2.0/UDP " << m_ListenerIP <<";branch=" <<
> ParserTools::GenBranchParameter() << "\r\n";
>
> msg <<
> "CSeq: 1 ACK" << "\r\n";
>
> msg <<
> "Max-Forwards:" << "70" << "\r\n";
>
> msg <<
> "Call-ID: " << ParserTools::GenGUID() << "\r\n";
>
> msg <<
> "Content-Length: 0" <<"\r\n";
>
> Parse( msg.str() );
>
> TransactionId tid;
>
> m_UA->GetStack().EnqueueTransportWriteEvent(*
> this);
> /************************************************************************/
> Can we use call session from test application,How to call the call session
> methods?
>
> where it is being used?
>
> i think call session is having full functionality for call establishment?
>
>
> Can u tell me the code flow for eatblishing a call from my test
> application?
>
>
> Br,
> Jyothsna
>   On Thu, Apr 2, 2009 at 6:03 AM, Joegen Baclor <joe...@gm...>wrote:
>
>>  Ahhh, I see what you are doing wrong.  You don’t use
>> FindTransactionAndAddEvent() to send ACK because ACK never creates a
>> transaction.   Instead you must use GetStack().EnqueueTransportWriteEvent(
>> ack );
>> Look at BOOL CallSession::SendAck( const SIPMessage & response, constSIPMessage & sdp ) for a sample implementation.
>>
>> HTH,
>>
>> Joegen
>>
>>  *From:* Jyothsna Banda <jyo...@gm...>
>> *Sent:* Wednesday, April 01, 2009 8:41 PM
>> *To:* Joegen Baclor <jb...@so...> ;
>> ope...@li...
>> *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
>> Testapplication
>>
>>
>> Hi Joegen,
>>
>> Thanks for the reply.
>>
>> Iam using the same test registration application.
>>
>> Scenario: Sending Invite from Testapplication to SJPhone(running in
>> another system)
>>
>> I have added few methods in Register Class for Invite,ACK and 200_OK.
>>
>> Instead of sending the Registration ,iam calling the Invite method which i
>> have added.
>>
>> Find the attached Source file and XML ,reading the values from this file.
>>
>> Now iam getting call back (200OK)to onreceived message,there iam preparing
>> the ACK and sending back.but ACk is not going.
>>
>> Please check the code and let me know whether iam doing something wrong .
>>
>> Br,
>> Jyothsna
>>
>>
>>
>>
>>
>> On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...>wrote:
>>
>>> Can you publish the test application code?  I want to see how you are
>>> sending the INVITE out so we have something in common to look at.
>>> Tools/TestRegistration sample application in OpenSBC demonstrates pretty
>>> basic transaction callbacks.  You might want to start with that as well.
>>>
>>>
>>> --------------------------------------------------
>>> From: "Jyothsna Banda" <jyo...@gm...>
>>> Sent: Wednesday, April 01, 2009 5:53 PM
>>> To: <ope...@li...>
>>> Subject: [OpenSIPStack] Call back for an Invite Response in the
>>> Testapplication
>>>
>>> > Hi,
>>> >
>>> > I have tried two scenarios for sending an Invite Request:
>>> >
>>> > First Scenario:
>>> >
>>> > Iam sending an Invite request thru test application  to SJPhone running
>>> on
>>> > another machine.
>>> >
>>> > receiving the 200 Ok from Sjphone to test application. Where will we
>>> get
>>> > the
>>> > call back in Test application, so that we can send an Ack for the 200
>>> ok
>>> > response.
>>> >
>>> > Second Scenario:
>>> >
>>> > when sending the Invite message from test application to OpensipStack
>>> > server
>>> > running on the other message,
>>> > getting the 100 Trying call back in the test application Onreceived
>>> > message.Here how to send the 200 ok response from test application
>>> acting
>>> > as
>>> > a user agent server.Also how to set the test application as User Agent
>>> > server?
>>> >
>>> >
>>> >
>>> > Can any one please help.
>>> >
>>> > Br,
>>> > Jyothsna
>>> >
>>> ------------------------------------------------------------------------------
>>> > _______________________________________________
>>> > opensipstack-devel mailing list
>>> > ope...@li...
>>> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>
>>>
>>>
>>> >
>>> > No virus found in this incoming message.
>>> > Checked by AVG - www.avg.com
>>> > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>>> 03/31/09
>>> > 13:05:00
>>> >
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> opensipstack-devel mailing list
>>> ope...@li...
>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>
>>
>>  ------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09
>> 13:05:00
>>
>>
>

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Joegen B. <joe...@gm...> - 2009-04-02 11:37:07

You should start by reading RFC 3261.   ACK should follow the rules of constructing messages within the dialog.  Looking briefly at the code,   the ACK that will be sent out will be missing a to-tag.  This must be why the UAS is discarding the ACK.




From: Jyothsna Banda 
Sent: Thursday, April 02, 2009 3:24 PM
To: Joegen Baclor 
Cc: ope...@li... 
Subject: Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication


Hi Joegen,

If i send the message in the below way,if we chekc in th wireshar ACK message is having 
CSeq as 1 INVITE only.

so what i did is:

Send_ACK(

const SIPMessage & message) 
{



SIPMessage ack; 

SIPMessage sdp; 


const Via & via = message.GetTopVia(); 
OString branch = via.GetBranch();


if( sdp.HasSDP() ) 
{

ack.SetBody( sdp.GetBody() );

}


ack.SetInterfaceAddress(via.GetAddress());

ack.SetInterfacePort(via.GetPort());

CSeq cseq;

cseq.SetMethod( 

"ACK" ); 
cseq.SetSequence( message.GetCSeqNumber() );

ack.SetCSeq( cseq );

if

( message.GetTransaction() != NULL ) 
{

SIPFSM::InviteClientTransaction * trn = 

dynamic_cast<SIPFSM::InviteClientTransaction*>(message.GetTransaction()); 

if( trn != NULL ) 
trn->SetFinalACK( ack );

}

m_UA->GetStack().EnqueueTransportWriteEvent(ack); 

}


but when i debug the code internally in the EnqueueTransportWriteEvent(),it is calling SIPMessage method ProcessOutBound there it is cleaning all the message varaibles and deleting the event.so the message is not at all going from one to the other end.

How to proceed further?Please can u look in to this?


Br,
Jyothsna

On Thu, Apr 2, 2009 at 11:11 AM, Jyothsna Banda <jyo...@gm...> wrote:

  Hi Joegen,

  Thanks again for the quick response.

  By using that method iam sending the ACK,in wireshark it is showing ,but the SJphone is not receiving the ACK message? check the below sample code how iam sending from the test application.

  /*********** sample code ***********/

  OStringStream msg;

  msg << 

  "ACK " << "sip:" << m_Domain <<":"<<"5060"<< " SIP/2.0" << "\r\n"; 
  msg << 

  "From: <sip:" << m_ListenerIP<< ">" << ";tag=" << ParserTools::GenTagParameter() << "\r\n"; 
  msg << 

  "To: <sip:" << m_ToUser << m_Domain << ">" << "\r\n"; 
  msg << 

  "Contact: " << "<" << m_ContactURI << ">" << "\r\n"; 
  msg << 

  "Via:" << "SIP/2.0/UDP " << m_ListenerIP <<";branch=" << ParserTools::GenBranchParameter() << "\r\n"; 
  msg << 

  "CSeq: 1 ACK" << "\r\n"; 
  msg << 

  "Max-Forwards:" << "70" << "\r\n"; 
  msg << 

  "Call-ID: " << ParserTools::GenGUID() << "\r\n"; 
  msg << 

  "Content-Length: 0" <<"\r\n"; 
  Parse( msg.str() );

  TransactionId tid; 

  m_UA->GetStack().EnqueueTransportWriteEvent(*

  this);
  /************************************************************************/
  Can we use call session from test application,How to call the call session methods?

  where it is being used?

  i think call session is having full functionality for call establishment?


  Can u tell me the code flow for eatblishing a call from my test application?


  Br,
  Jyothsna

  On Thu, Apr 2, 2009 at 6:03 AM, Joegen Baclor <joe...@gm...> wrote:

    Ahhh, I see what you are doing wrong.  You don’t use FindTransactionAndAddEvent() to send ACK because ACK never creates a transaction.   Instead you must use GetStack().EnqueueTransportWriteEvent( ack );
    Look at BOOL CallSession::SendAck( const SIPMessage & response, const SIPMessage & sdp ) for a sample implementation.
    HTH,

    Joegen



    From: Jyothsna Banda 
    Sent: Wednesday, April 01, 2009 8:41 PM
    To: Joegen Baclor ; ope...@li... 
    Subject: Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication



    Hi Joegen,

    Thanks for the reply.

    Iam using the same test registration application.

    Scenario: Sending Invite from Testapplication to SJPhone(running in another system)

    I have added few methods in Register Class for Invite,ACK and 200_OK.

    Instead of sending the Registration ,iam calling the Invite method which i have added.

    Find the attached Source file and XML ,reading the values from this file.

    Now iam getting call back (200OK)to onreceived message,there iam preparing the ACK and sending back.but ACk is not going.

    Please check the code and let me know whether iam doing something wrong .

    Br,
    Jyothsna




     
    On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...> wrote:

      Can you publish the test application code?  I want to see how you are
      sending the INVITE out so we have something in common to look at.
      Tools/TestRegistration sample application in OpenSBC demonstrates pretty
      basic transaction callbacks.  You might want to start with that as well.


      --------------------------------------------------
      From: "Jyothsna Banda" <jyo...@gm...>
      Sent: Wednesday, April 01, 2009 5:53 PM
      To: <ope...@li...>
      Subject: [OpenSIPStack] Call back for an Invite Response in the
      Testapplication


      > Hi,
      >
      > I have tried two scenarios for sending an Invite Request:
      >
      > First Scenario:
      >
      > Iam sending an Invite request thru test application  to SJPhone running on
      > another machine.
      >
      > receiving the 200 Ok from Sjphone to test application. Where will we get
      > the
      > call back in Test application, so that we can send an Ack for the 200 ok
      > response.
      >
      > Second Scenario:
      >
      > when sending the Invite message from test application to OpensipStack
      > server
      > running on the other message,
      > getting the 100 Trying call back in the test application Onreceived
      > message.Here how to send the 200 ok response from test application acting
      > as
      > a user agent server.Also how to set the test application as User Agent
      > server?
      >
      >
      >
      > Can any one please help.
      >
      > Br,
      > Jyothsna

      > ------------------------------------------------------------------------------
      > _______________________________________________
      > opensipstack-devel mailing list
      > ope...@li...
      > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel



      >
      > No virus found in this incoming message.
      > Checked by AVG - www.avg.com
      > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09
      > 13:05:00
      >

      ------------------------------------------------------------------------------
      _______________________________________________
      opensipstack-devel mailing list
      ope...@li...
      https://lists.sourceforge.net/lists/listinfo/opensipstack-devel





----------------------------------------------------------------------------



    No virus found in this incoming message.
    Checked by AVG - www.avg.com 
    Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date: 03/31/09 13:05:00










--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.238 / Virus Database: 270.11.37/2036 - Release Date: 04/01/09 21:02:00

Re: [OpenSIPStack] Call back for an Invite Response in the Testapplication

From: Jyothsna B. <jyo...@gm...> - 2009-04-07 07:10:45

Hi All,

Please can any one look into this issue?

For the issue please check the below mails.


Br,
Jyothsna
On Mon, Apr 6, 2009 at 11:42 AM, Jyothsna Banda <jyo...@gm...>wrote:

> Hi Joegen,
>
> Can u help?Iam stucked at this point.
>
> Not getting call back  to the test application when the BYE is sent from
> the other end(SJPhone)
>
>
> Thanks in advance
>  Br,
> Jyothsna
>
>   On Thu, Apr 2, 2009 at 5:59 PM, Jyothsna Banda <jyo...@gm...
> > wrote:
>
>> Hi Joegen,
>>
>> Yes the ACk was not formed properly.
>>
>> Now I corrected and able to send the message.Call is established.
>>
>> Now at the other end(SJPhone) call is ended.So the BYE is sent from the
>> SJPhone,Iam not getting call back to the Test application.
>>
>> Where will we i get the call back for the BYE request?I have kept a break
>> point at SIPStack onreceived message also.But not received.
>>
>>
>>
>> Br,
>> Jyothsna
>>
>>
>>
>>
>> On Thu, Apr 2, 2009 at 5:06 PM, Joegen Baclor <joe...@gm...>wrote:
>>
>>>  You should start by reading RFC 3261.   ACK should follow the rules of
>>> constructing messages within the dialog.  Looking briefly at the code,   the
>>> ACK that will be sent out will be missing a to-tag.  This must be why the
>>> UAS is discarding the ACK.
>>>
>>>
>>>
>>>  *From:* Jyothsna Banda <jyo...@gm...>
>>> *Sent:* Thursday, April 02, 2009 3:24 PM
>>> *To:* Joegen Baclor <jb...@so...>
>>> *Cc:* ope...@li...
>>>   *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
>>> Testapplication
>>>
>>> Hi Joegen,
>>>
>>> If i send the message in the below way,if we chekc in th wireshar ACK
>>> message is having
>>> CSeq as 1 INVITE only.
>>>
>>> so what i did is:
>>>
>>>
>>> Send_ACK(
>>> const SIPMessage & message)
>>>
>>> {
>>>
>>> SIPMessage ack;
>>>
>>> SIPMessage sdp;
>>>
>>> const Via & via = message.GetTopVia();
>>>
>>> OString branch = via.GetBranch();
>>>
>>> if( sdp.HasSDP() )
>>>
>>> {
>>>
>>> ack.SetBody( sdp.GetBody() );
>>>
>>> }
>>>
>>> ack.SetInterfaceAddress(via.GetAddress());
>>>
>>> ack.SetInterfacePort(via.GetPort());
>>>
>>> CSeq cseq;
>>>
>>> cseq.SetMethod(
>>> "ACK" );
>>>
>>> cseq.SetSequence( message.GetCSeqNumber() );
>>>
>>> ack.SetCSeq( cseq );
>>>
>>> if
>>> ( message.GetTransaction() != NULL )
>>>
>>> {
>>>
>>> SIPFSM::InviteClientTransaction * trn =
>>> dynamic_cast<SIPFSM::InviteClientTransaction*>(message.GetTransaction());
>>>
>>>
>>> if( trn != NULL )
>>>
>>> trn->SetFinalACK( ack );
>>>
>>> }
>>>
>>> m_UA->GetStack().EnqueueTransportWriteEvent(ack);
>>>
>>> }
>>>
>>> but when i debug the code internally in the
>>> EnqueueTransportWriteEvent(),it is calling SIPMessage method ProcessOutBound
>>> there it is cleaning all the message varaibles and deleting the event.so the
>>> message is not at all going from one to the other end.
>>>
>>> How to proceed further?Please can u look in to this?
>>>
>>>
>>> Br,
>>> Jyothsna
>>> On Thu, Apr 2, 2009 at 11:11 AM, Jyothsna Banda <
>>> jyo...@gm...> wrote:
>>>
>>>> Hi Joegen,
>>>>
>>>> Thanks again for the quick response.
>>>>
>>>> By using that method iam sending the ACK,in wireshark it is showing ,but
>>>> the SJphone is not receiving the ACK message? check the below sample code
>>>> how iam sending from the test application.
>>>>
>>>> /*********** sample code ***********/
>>>>
>>>>
>>>> OStringStream msg;
>>>>
>>>> msg <<
>>>> "ACK " << "sip:" << m_Domain <<":"<<"5060"<< " SIP/2.0" << "\r\n";
>>>>
>>>> msg <<
>>>> "From: <sip:" << m_ListenerIP<< ">" << ";tag=" <<
>>>> ParserTools::GenTagParameter() << "\r\n";
>>>>
>>>> msg <<
>>>> "To: <sip:" << m_ToUser << m_Domain << ">" << "\r\n";
>>>>
>>>> msg <<
>>>> "Contact: " << "<" << m_ContactURI << ">" << "\r\n";
>>>>
>>>> msg <<
>>>> "Via:" << "SIP/2.0/UDP " << m_ListenerIP <<";branch=" <<
>>>> ParserTools::GenBranchParameter() << "\r\n";
>>>>
>>>> msg <<
>>>> "CSeq: 1 ACK" << "\r\n";
>>>>
>>>> msg <<
>>>> "Max-Forwards:" << "70" << "\r\n";
>>>>
>>>> msg <<
>>>> "Call-ID: " << ParserTools::GenGUID() << "\r\n";
>>>>
>>>> msg <<
>>>> "Content-Length: 0" <<"\r\n";
>>>>
>>>> Parse( msg.str() );
>>>>
>>>> TransactionId tid;
>>>>
>>>> m_UA->GetStack().EnqueueTransportWriteEvent(*
>>>> this);
>>>>
>>>> /************************************************************************/
>>>> Can we use call session from test application,How to call the call
>>>> session methods?
>>>>
>>>> where it is being used?
>>>>
>>>> i think call session is having full functionality for call
>>>> establishment?
>>>>
>>>>
>>>> Can u tell me the code flow for eatblishing a call from my test
>>>> application?
>>>>
>>>>
>>>> Br,
>>>> Jyothsna
>>>>   On Thu, Apr 2, 2009 at 6:03 AM, Joegen Baclor <
>>>> joe...@gm...> wrote:
>>>>
>>>>>  Ahhh, I see what you are doing wrong.  You don’t use
>>>>> FindTransactionAndAddEvent() to send ACK because ACK never creates a
>>>>> transaction.   Instead you must use GetStack().EnqueueTransportWriteEvent(
>>>>> ack );
>>>>> Look at BOOL CallSession::SendAck( const SIPMessage & response, constSIPMessage & sdp ) for a sample implementation.
>>>>>
>>>>> HTH,
>>>>>
>>>>> Joegen
>>>>>
>>>>>  *From:* Jyothsna Banda <jyo...@gm...>
>>>>> *Sent:* Wednesday, April 01, 2009 8:41 PM
>>>>> *To:* Joegen Baclor <jb...@so...> ;
>>>>> ope...@li...
>>>>> *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
>>>>> Testapplication
>>>>>
>>>>>
>>>>> Hi Joegen,
>>>>>
>>>>> Thanks for the reply.
>>>>>
>>>>> Iam using the same test registration application.
>>>>>
>>>>> Scenario: Sending Invite from Testapplication to SJPhone(running in
>>>>> another system)
>>>>>
>>>>> I have added few methods in Register Class for Invite,ACK and 200_OK.
>>>>>
>>>>> Instead of sending the Registration ,iam calling the Invite method
>>>>> which i have added.
>>>>>
>>>>> Find the attached Source file and XML ,reading the values from this
>>>>> file.
>>>>>
>>>>> Now iam getting call back (200OK)to onreceived message,there iam
>>>>> preparing the ACK and sending back.but ACk is not going.
>>>>>
>>>>> Please check the code and let me know whether iam doing something wrong
>>>>> .
>>>>>
>>>>> Br,
>>>>> Jyothsna
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor <joe...@gm...
>>>>> > wrote:
>>>>>
>>>>>> Can you publish the test application code?  I want to see how you are
>>>>>> sending the INVITE out so we have something in common to look at.
>>>>>> Tools/TestRegistration sample application in OpenSBC demonstrates
>>>>>> pretty
>>>>>> basic transaction callbacks.  You might want to start with that as
>>>>>> well.
>>>>>>
>>>>>>
>>>>>> --------------------------------------------------
>>>>>> From: "Jyothsna Banda" <jyo...@gm...>
>>>>>> Sent: Wednesday, April 01, 2009 5:53 PM
>>>>>> To: <ope...@li...>
>>>>>> Subject: [OpenSIPStack] Call back for an Invite Response in the
>>>>>> Testapplication
>>>>>>
>>>>>> > Hi,
>>>>>> >
>>>>>> > I have tried two scenarios for sending an Invite Request:
>>>>>> >
>>>>>> > First Scenario:
>>>>>> >
>>>>>> > Iam sending an Invite request thru test application  to SJPhone
>>>>>> running on
>>>>>> > another machine.
>>>>>> >
>>>>>> > receiving the 200 Ok from Sjphone to test application. Where will we
>>>>>> get
>>>>>> > the
>>>>>> > call back in Test application, so that we can send an Ack for the
>>>>>> 200 ok
>>>>>> > response.
>>>>>> >
>>>>>> > Second Scenario:
>>>>>> >
>>>>>> > when sending the Invite message from test application to
>>>>>> OpensipStack
>>>>>> > server
>>>>>> > running on the other message,
>>>>>> > getting the 100 Trying call back in the test application Onreceived
>>>>>> > message.Here how to send the 200 ok response from test application
>>>>>> acting
>>>>>> > as
>>>>>> > a user agent server.Also how to set the test application as User
>>>>>> Agent
>>>>>> > server?
>>>>>> >
>>>>>> >
>>>>>> >
>>>>>> > Can any one please help.
>>>>>> >
>>>>>> > Br,
>>>>>> > Jyothsna
>>>>>> >
>>>>>> ------------------------------------------------------------------------------
>>>>>> > _______________________________________________
>>>>>> > opensipstack-devel mailing list
>>>>>> > ope...@li...
>>>>>> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>>>
>>>>>>
>>>>>>
>>>>>> >
>>>>>> > No virus found in this incoming message.
>>>>>> > Checked by AVG - www.avg.com
>>>>>> > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>>>>>> 03/31/09
>>>>>> > 13:05:00
>>>>>> >
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> _______________________________________________
>>>>>> opensipstack-devel mailing list
>>>>>> ope...@li...
>>>>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>>>
>>>>>
>>>>>  ------------------------------
>>>>>
>>>>>
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG - www.avg.com
>>>>> Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>>>>> 03/31/09 13:05:00
>>>>>
>>>>>
>>>>
>>>  ------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.0.238 / Virus Database: 270.11.37/2036 - Release Date:
>>> 04/01/09 21:02:00
>>>
>>>
>>
>

Re: [OpenSIPStack] Call back for an Invite Response in theTestapplication

From: Joegen B. <joe...@gm...> - 2009-04-07 12:30:09

Hi,

Sorry for the late response.  You can get incoming SIPMessages in 
SIPUserAgent::ProcessEvent().  If you are using TestRegistration as your 
basis, then TestRegistration::ProcessEvent() is where you should look at.

Add the following code inside that function to get the BYE request

if( event->GetType() == SIPStackEvent::Message )
  {
    SIPMessageArrival & msgEvent = (SIPMessageArrival&)*event;
    SIPMessage bye = msgEvent.GetMessage();
    SIPMessage ok;
    bye.CreateResponse( SIPMessage::Code200_Ok, ok );
    SendRequest( ok );
}

HTH,

Joegen
--------------------------------------------------
From: "Jyothsna Banda" <jyo...@gm...>
Sent: Tuesday, April 07, 2009 3:10 PM
To: "Joegen Baclor" <jb...@so...>
Cc: <ope...@li...>
Subject: Re: [OpenSIPStack] Call back for an Invite Response in 
theTestapplication

> Hi All,
>
> Please can any one look into this issue?
>
> For the issue please check the below mails.
>
>
> Br,
> Jyothsna
> On Mon, Apr 6, 2009 at 11:42 AM, Jyothsna Banda 
> <jyo...@gm...>wrote:
>
>> Hi Joegen,
>>
>> Can u help?Iam stucked at this point.
>>
>> Not getting call back  to the test application when the BYE is sent from
>> the other end(SJPhone)
>>
>>
>> Thanks in advance
>>  Br,
>> Jyothsna
>>
>>   On Thu, Apr 2, 2009 at 5:59 PM, Jyothsna Banda 
>> <jyo...@gm...
>> > wrote:
>>
>>> Hi Joegen,
>>>
>>> Yes the ACk was not formed properly.
>>>
>>> Now I corrected and able to send the message.Call is established.
>>>
>>> Now at the other end(SJPhone) call is ended.So the BYE is sent from the
>>> SJPhone,Iam not getting call back to the Test application.
>>>
>>> Where will we i get the call back for the BYE request?I have kept a 
>>> break
>>> point at SIPStack onreceived message also.But not received.
>>>
>>>
>>>
>>> Br,
>>> Jyothsna
>>>
>>>
>>>
>>>
>>> On Thu, Apr 2, 2009 at 5:06 PM, Joegen Baclor 
>>> <joe...@gm...>wrote:
>>>
>>>>  You should start by reading RFC 3261.   ACK should follow the rules of
>>>> constructing messages within the dialog.  Looking briefly at the code, 
>>>> the
>>>> ACK that will be sent out will be missing a to-tag.  This must be why 
>>>> the
>>>> UAS is discarding the ACK.
>>>>
>>>>
>>>>
>>>>  *From:* Jyothsna Banda <jyo...@gm...>
>>>> *Sent:* Thursday, April 02, 2009 3:24 PM
>>>> *To:* Joegen Baclor <jb...@so...>
>>>> *Cc:* ope...@li...
>>>>   *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
>>>> Testapplication
>>>>
>>>> Hi Joegen,
>>>>
>>>> If i send the message in the below way,if we chekc in th wireshar ACK
>>>> message is having
>>>> CSeq as 1 INVITE only.
>>>>
>>>> so what i did is:
>>>>
>>>>
>>>> Send_ACK(
>>>> const SIPMessage & message)
>>>>
>>>> {
>>>>
>>>> SIPMessage ack;
>>>>
>>>> SIPMessage sdp;
>>>>
>>>> const Via & via = message.GetTopVia();
>>>>
>>>> OString branch = via.GetBranch();
>>>>
>>>> if( sdp.HasSDP() )
>>>>
>>>> {
>>>>
>>>> ack.SetBody( sdp.GetBody() );
>>>>
>>>> }
>>>>
>>>> ack.SetInterfaceAddress(via.GetAddress());
>>>>
>>>> ack.SetInterfacePort(via.GetPort());
>>>>
>>>> CSeq cseq;
>>>>
>>>> cseq.SetMethod(
>>>> "ACK" );
>>>>
>>>> cseq.SetSequence( message.GetCSeqNumber() );
>>>>
>>>> ack.SetCSeq( cseq );
>>>>
>>>> if
>>>> ( message.GetTransaction() != NULL )
>>>>
>>>> {
>>>>
>>>> SIPFSM::InviteClientTransaction * trn =
>>>> dynamic_cast<SIPFSM::InviteClientTransaction*>(message.GetTransaction());
>>>>
>>>>
>>>> if( trn != NULL )
>>>>
>>>> trn->SetFinalACK( ack );
>>>>
>>>> }
>>>>
>>>> m_UA->GetStack().EnqueueTransportWriteEvent(ack);
>>>>
>>>> }
>>>>
>>>> but when i debug the code internally in the
>>>> EnqueueTransportWriteEvent(),it is calling SIPMessage method 
>>>> ProcessOutBound
>>>> there it is cleaning all the message varaibles and deleting the 
>>>> event.so the
>>>> message is not at all going from one to the other end.
>>>>
>>>> How to proceed further?Please can u look in to this?
>>>>
>>>>
>>>> Br,
>>>> Jyothsna
>>>> On Thu, Apr 2, 2009 at 11:11 AM, Jyothsna Banda <
>>>> jyo...@gm...> wrote:
>>>>
>>>>> Hi Joegen,
>>>>>
>>>>> Thanks again for the quick response.
>>>>>
>>>>> By using that method iam sending the ACK,in wireshark it is showing 
>>>>> ,but
>>>>> the SJphone is not receiving the ACK message? check the below sample 
>>>>> code
>>>>> how iam sending from the test application.
>>>>>
>>>>> /*********** sample code ***********/
>>>>>
>>>>>
>>>>> OStringStream msg;
>>>>>
>>>>> msg <<
>>>>> "ACK " << "sip:" << m_Domain <<":"<<"5060"<< " SIP/2.0" << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "From: <sip:" << m_ListenerIP<< ">" << ";tag=" <<
>>>>> ParserTools::GenTagParameter() << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "To: <sip:" << m_ToUser << m_Domain << ">" << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "Contact: " << "<" << m_ContactURI << ">" << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "Via:" << "SIP/2.0/UDP " << m_ListenerIP <<";branch=" <<
>>>>> ParserTools::GenBranchParameter() << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "CSeq: 1 ACK" << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "Max-Forwards:" << "70" << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "Call-ID: " << ParserTools::GenGUID() << "\r\n";
>>>>>
>>>>> msg <<
>>>>> "Content-Length: 0" <<"\r\n";
>>>>>
>>>>> Parse( msg.str() );
>>>>>
>>>>> TransactionId tid;
>>>>>
>>>>> m_UA->GetStack().EnqueueTransportWriteEvent(*
>>>>> this);
>>>>>
>>>>> /************************************************************************/
>>>>> Can we use call session from test application,How to call the call
>>>>> session methods?
>>>>>
>>>>> where it is being used?
>>>>>
>>>>> i think call session is having full functionality for call
>>>>> establishment?
>>>>>
>>>>>
>>>>> Can u tell me the code flow for eatblishing a call from my test
>>>>> application?
>>>>>
>>>>>
>>>>> Br,
>>>>> Jyothsna
>>>>>   On Thu, Apr 2, 2009 at 6:03 AM, Joegen Baclor <
>>>>> joe...@gm...> wrote:
>>>>>
>>>>>>  Ahhh, I see what you are doing wrong.  You don’t use
>>>>>> FindTransactionAndAddEvent() to send ACK because ACK never creates a
>>>>>> transaction.   Instead you must use 
>>>>>> GetStack().EnqueueTransportWriteEvent(
>>>>>> ack );
>>>>>> Look at BOOL CallSession::SendAck( const SIPMessage & response, 
>>>>>> constSIPMessage & sdp ) for a sample implementation.
>>>>>>
>>>>>> HTH,
>>>>>>
>>>>>> Joegen
>>>>>>
>>>>>>  *From:* Jyothsna Banda <jyo...@gm...>
>>>>>> *Sent:* Wednesday, April 01, 2009 8:41 PM
>>>>>> *To:* Joegen Baclor <jb...@so...> ;
>>>>>> ope...@li...
>>>>>> *Subject:* Re: [OpenSIPStack] Call back for an Invite Response in the
>>>>>> Testapplication
>>>>>>
>>>>>>
>>>>>> Hi Joegen,
>>>>>>
>>>>>> Thanks for the reply.
>>>>>>
>>>>>> Iam using the same test registration application.
>>>>>>
>>>>>> Scenario: Sending Invite from Testapplication to SJPhone(running in
>>>>>> another system)
>>>>>>
>>>>>> I have added few methods in Register Class for Invite,ACK and 200_OK.
>>>>>>
>>>>>> Instead of sending the Registration ,iam calling the Invite method
>>>>>> which i have added.
>>>>>>
>>>>>> Find the attached Source file and XML ,reading the values from this
>>>>>> file.
>>>>>>
>>>>>> Now iam getting call back (200OK)to onreceived message,there iam
>>>>>> preparing the ACK and sending back.but ACk is not going.
>>>>>>
>>>>>> Please check the code and let me know whether iam doing something 
>>>>>> wrong
>>>>>> .
>>>>>>
>>>>>> Br,
>>>>>> Jyothsna
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Apr 1, 2009 at 5:14 PM, Joegen Baclor 
>>>>>> <joe...@gm...
>>>>>> > wrote:
>>>>>>
>>>>>>> Can you publish the test application code?  I want to see how you 
>>>>>>> are
>>>>>>> sending the INVITE out so we have something in common to look at.
>>>>>>> Tools/TestRegistration sample application in OpenSBC demonstrates
>>>>>>> pretty
>>>>>>> basic transaction callbacks.  You might want to start with that as
>>>>>>> well.
>>>>>>>
>>>>>>>
>>>>>>> --------------------------------------------------
>>>>>>> From: "Jyothsna Banda" <jyo...@gm...>
>>>>>>> Sent: Wednesday, April 01, 2009 5:53 PM
>>>>>>> To: <ope...@li...>
>>>>>>> Subject: [OpenSIPStack] Call back for an Invite Response in the
>>>>>>> Testapplication
>>>>>>>
>>>>>>> > Hi,
>>>>>>> >
>>>>>>> > I have tried two scenarios for sending an Invite Request:
>>>>>>> >
>>>>>>> > First Scenario:
>>>>>>> >
>>>>>>> > Iam sending an Invite request thru test application  to SJPhone
>>>>>>> running on
>>>>>>> > another machine.
>>>>>>> >
>>>>>>> > receiving the 200 Ok from Sjphone to test application. Where will 
>>>>>>> > we
>>>>>>> get
>>>>>>> > the
>>>>>>> > call back in Test application, so that we can send an Ack for the
>>>>>>> 200 ok
>>>>>>> > response.
>>>>>>> >
>>>>>>> > Second Scenario:
>>>>>>> >
>>>>>>> > when sending the Invite message from test application to
>>>>>>> OpensipStack
>>>>>>> > server
>>>>>>> > running on the other message,
>>>>>>> > getting the 100 Trying call back in the test application 
>>>>>>> > Onreceived
>>>>>>> > message.Here how to send the 200 ok response from test application
>>>>>>> acting
>>>>>>> > as
>>>>>>> > a user agent server.Also how to set the test application as User
>>>>>>> Agent
>>>>>>> > server?
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> > Can any one please help.
>>>>>>> >
>>>>>>> > Br,
>>>>>>> > Jyothsna
>>>>>>> >
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> > _______________________________________________
>>>>>>> > opensipstack-devel mailing list
>>>>>>> > ope...@li...
>>>>>>> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> >
>>>>>>> > No virus found in this incoming message.
>>>>>>> > Checked by AVG - www.avg.com
>>>>>>> > Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>>>>>>> 03/31/09
>>>>>>> > 13:05:00
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> _______________________________________________
>>>>>>> opensipstack-devel mailing list
>>>>>>> ope...@li...
>>>>>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>>>>
>>>>>>
>>>>>>  ------------------------------
>>>>>>
>>>>>>
>>>>>> No virus found in this incoming message.
>>>>>> Checked by AVG - www.avg.com
>>>>>> Version: 8.0.238 / Virus Database: 270.11.35/2033 - Release Date:
>>>>>> 03/31/09 13:05:00
>>>>>>
>>>>>>
>>>>>
>>>>  ------------------------------
>>>>
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.0.238 / Virus Database: 270.11.37/2036 - Release Date:
>>>> 04/01/09 21:02:00
>>>>
>>>>
>>>
>>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> High Quality Requirements in a Collaborative Environment.
> Download a free trial of Rational Requirements Composer Now!
> http://p.sf.net/sfu/www-ibm-com
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>



>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.44/2044 - Release Date: 04/06/09 
> 18:59:00
>