opensipstack-devel

[OpenSIPStack] Open SBC Configuration

[<na...@yu...>]

Hi,
 
Open SBC came right up following the build instructions.  The
application is Nat transversal and RTP proxy.  Here is the
configuration:
 
SIP Server  <- ----------------> OSBC <-
-------------------------------> Internet<- -------------------> Router
<- ----------------------> Sip Client
 
PrivateIP A             PrivateIP B and Public IP A
Public IP B and PrivateIP C                  Private IP D
 
 
I have tried changing every field that made sense to me though the OSBC
web interface and so far have only been able to make the Sip Client ring
and have one way voice.
 
What setting on the OSBC need to be changed to make this work?  What
values/syntax need to be used?
 
Thanks,
 
Don

Re: [OpenSIPStack] Open SBC Configuration

[Joegen E. B. <joe...@gm...>]

Is OpenSBC residing in public space or is it also behind your NAT 
router?    So far, OpenSBC has only been tested as a far end media 
anchor in public space.  If you are trying to use OpenSBC to proxy media 
via NAT pin holes, then OpenSBC is not equipped to deal with that 
scenario as of now.

you flow should be:

SIP Client (Private) ---> NAT Router ---->   {{{{ WAN / Public 
Internet}}}} --->  OpenSBC (Public) --->  SIP Provider (Public)


na...@yu... wrote:
> Hi,
>  
> Open SBC came right up following the build instructions.  The
> application is Nat transversal and RTP proxy.  Here is the
> configuration:
>  
> SIP Server  <- ----------------> OSBC <-
> -------------------------------> Internet<- -------------------> Router
> <- ----------------------> Sip Client
>  
> PrivateIP A             PrivateIP B and Public IP A
> Public IP B and PrivateIP C                  Private IP D
>  
>  
> I have tried changing every field that made sense to me though the OSBC
> web interface and so far have only been able to make the Sip Client ring
> and have one way voice.
>  
> What setting on the OSBC need to be changed to make this work?  What
> values/syntax need to be used?
>  
> Thanks,
>  
> Don
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>
>
>   

Re: [OpenSIPStack] Open SBC Configuration

[<na...@yu...>]

Open SBC has one Ethernet card with a public address and one Ethernet
card private.  The private Ethernet card connects to my own Sip server

Don 

-----Original Message-----
From: ope...@li...
[mailto:ope...@li...] On Behalf Of
Joegen E. Baclor
Sent: Sunday, September 30, 2007 9:36 PM
To: ope...@li...
Subject: Re: [OpenSIPStack] Open SBC Configuration

Is OpenSBC residing in public space or is it also behind your NAT 
router?    So far, OpenSBC has only been tested as a far end media 
anchor in public space.  If you are trying to use OpenSBC to proxy media

via NAT pin holes, then OpenSBC is not equipped to deal with that 
scenario as of now.

you flow should be:

SIP Client (Private) ---> NAT Router ---->   {{{{ WAN / Public 
Internet}}}} --->  OpenSBC (Public) --->  SIP Provider (Public)


na...@yu... wrote:
> Hi,
>  
> Open SBC came right up following the build instructions.  The
> application is Nat transversal and RTP proxy.  Here is the
> configuration:
>  
> SIP Server  <- ----------------> OSBC <-
> -------------------------------> Internet<- ------------------->
Router
> <- ----------------------> Sip Client
>  
> PrivateIP A             PrivateIP B and Public IP A
> Public IP B and PrivateIP C                  Private IP D
>  
>  
> I have tried changing every field that made sense to me though the
OSBC
> web interface and so far have only been able to make the Sip Client
ring
> and have one way voice.
>  
> What setting on the OSBC need to be changed to make this work?  What
> values/syntax need to be used?
>  
> Thanks,
>  
> Don
>
------------------------------------------------------------------------
-
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>
>
>   


------------------------------------------------------------------------
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
opensipstack-devel mailing list
ope...@li...
https://lists.sourceforge.net/lists/listinfo/opensipstack-devel

!DSPAM:16,470081ee42199297821393!