Re: [OpenSBC] sip-trunk=true problem

[<sa...@ER...>]

Hi Joegen

I put tracing code into SBCCallHandling.cxx in the OnOutgoingCalls and the
if (routeList.GetSize) is never entered even thought have Sip Trunk Config
set with and xml file.   In the Web admin/ sip trunk registration is empty
and the B2Bua has a route with sip-trunk=true being used.

I noted this behavior over the last 48 hr.  but this was working all week
It began happening about 15 reboots ago.  I laught at the way i messure
time.  Is there some flag or something that is not getting cleared.

One point maybe of interest and don't know if it's related.

When i originally installed the OSBC i had two active NIC running and later
shut down one permently because i down need private access to sipX because
OSBC and sipX both are now in the public ip space.  Could this somehow
causing a routing problem for SiP Trunking?

Warren Kreckler