Re: [OpenSIPStack] [OpenSBC] Two (2) OSBC on net segment

[<sa...@ER...>]

Hi ehernaez

Using your first example  inbound call from PSTN: ITSP -> Peering
OSBC ->  Access OSBC  ->  SIPX
What mode would you set?
What route (b2bua, relay) would you recomend setting on the Peering OSBC to
reach the Acceess OSBC or is a matter of Trusted Domain and setting either
in not required?

Warren Kreckler


----- Original Message ----- 
From: "ehernaez" <ope...@op...>
To: <ope...@li...>
Sent: Saturday, December 29, 2007 9:58 AM
Subject: Re: [OpenSIPStack] [OpenSBC] Two (2) OSBC on net segment


> Hi Warren,
>
> Here is the call flow that you can use to bridge the 2 OSBC instances:
> For an inbound call from PSTN:    ITSP -&gt; Peering OSBC -&gt;  Access
OSBC
> -&gt;  SIPXFor an outbound cal to the PSTN:  UA -&gt;  Access OSBC -&gt;
SIPX -&gt; Peering
> OSBC -&gt;  ITSP
> *inbound calls must be routed through the access OSBC in order to reach
> endpoints that are registered thru the access OSBC
> HTH
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>