Re: [OpenSIPStack] Upper Registration Routes

[voice <vo...@ne...>]

Hi joegen

Thank you very much.

joegen wrote
> Solegy (Sponsor Company of OpenSBC) has a similar setup.  In fact
> B2BUpperReg mode came into life when we started to evaluate sipXecs.

How do i contact Solegy?  Do they still have those test boxes available?  Do
you know what version of sipX they are/were using?

r

----- Original Message ----- 
From: "jo...@op..." <joe...@gm...>
To: <ope...@li...>
Sent: Sunday, August 26, 2007 10:27 PM
Subject: Re: [OpenSIPStack] Upper Registration Routes


>
> voice wrote:
> > Hi
> >
> >
> >
> > Can someone check my logic and setup?
> >
> >
> >
> > I am using a Cisco ATA-186 in atasip 3.1.0 firmware with a public IPaddr
> > (69.x.x.x).
> >
> > I am setting the OutBoundProxy on the ATAs' to my openSBC name/ipaddr ==
> > sbc.netxxxxxx.net with a public IP Address 69.x.x.50.
> >
> > The ATA is registered in sipXecs 3.9.x also with a public IPaddr
69.x.x.40.
> >
> >
> >
> > I am also using but not in this test several Cisco 26xx routers run
nat/PAT.
> > These routers are in front several private networks.  The public side of
the
> > NAT are connected to transceivers (69.x.x.x).  For testing both boxes
are
> > hanging out on the Internet.  No firewalls, Nat nothing to get in the
way
> > etc...
> >
> >
> >
> > I would like to also have remote Internet (outside my network)
ATA/IPPhones
> > register to the sipXecs.
> >
> >
> >
> > On the openSBC I have set 'Upper Registration Routes' to point to the
> > sipxecs.  This is my string:
> >
> > [sip:*@sbc.network.net*] sip:sipx.network.net:5060.
> >
> > Using this approach will local and possibly the remote ATA be able to
> > register via the openSBC?
> >
>
> This should be possible.  The trick is, the domain sip:sbc.network.net
> should not resolve as the local address of OpenSBC.   If
> sip:sbc.network.net is a local address, then OpenSBC would try to be
> authoritative over the registrations.    The correct format would be:
>
> [sip:sipx.network.net*] sip:sipx.network.net:5060
>
>
>
> >
> >
> > Using openSBC in this way do should i set SBC Mode something other then
> > 'Full Mode'?
> >
> >
>
> I am suggesting B2BUpperReg Mode.  This would limit the work of OpenSBC
> to b2bua and upper reg.  Full mode includes the proxy functionality.
>
>
> >
> > When using openSBC using 'Upper registration Routes'  is there a basic
set
> > of setting i should be concerned with at the exclusion of other
settings?
> >
> >
> >
>
> No.  B2BUpperReg routes are just static routes for OpenSBC to follow in
> case the remote domain is not resolvable via DNS.  In  B2BUpperReg mode,
> you don't even have to put anything in the routes as long as the To-URI
> resolves to a remote domain.
>
>
>
> >
> >
> > Are there any sipXecs folks on this list with similar issues' to mine?
> >
> > I would be willing to open my test sipxecs and opensbc box's to further
> > development challenges in exchange for help setting up both boxes to
> > intergrate sipXecs and openSBC....
> >
> >
> >
>
>
> Solegy (Sponsor Company of OpenSBC) has a similar setup.  In fact
> B2BUpperReg mode came into life when we started to evaluate sipXecs.
>
>
>
> > r
> >
> >
> >
>
> -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc.
> > Still grepping through log files to find problems?  Stop.
> > Now Search log events and configuration files using AJAX and a browser.
> > Download your FREE copy of Splunk now >>  http://get.splunk.com/
> > _______________________________________________
> > opensipstack-devel mailing list
> > ope...@li...
> > https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
> >
> >
> >
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel