Re: [OpenSBC] Support for UDPTL (as used for T.38)?

[voice <vo...@ne...>]

Hi Joegen

Do contributions to the project end up in the Open Source source or Solegy
code?  I have read past forum traffic about contributions but had not found
any index or table of contents about them.

r


>
> ----- Original Message ----- 
> From: "Joegen Baclor" <jb...@so...>
> To: <ope...@op...>;
> <ope...@li...>
> Sent: Tuesday, January 27, 2009 11:00 PM
> Subject: Re: [OpenSBC] Support for UDPTL (as used for T.38)?
>
>
> > Your contribution to this project would be much welcome.  For starters,
> you
> > should be looking at three important objects in OpenSIPStack if you are
to
> > implement T.38 proxy in OpenSIPStack.  They are RTP_SessionManager,
> RTP_UDP
> > and B2BMediaInterface .   Each B2BUACall has an RTP_SessionManager of
it's
> > own which maintains the RTP_UDP session responsible for each leg while
> > B2BMediaInterface is the central location where parsing of the SDP Offer
> and
> > Answer is done.  You can simply base your T38_SessionManager and T38_UDP
> > classes from their RTP counterparts and modify B2BMediaInterface to
parse
> > T.38 m line as well.
> >
> > HTH
> >
> > Joegen
> >
> > >
> > > Too bad. We might try to add it. Is there anything we should know?
> > >
> >
> >
> >
>
> --------------------------------------------------------------------------
> ----
> > This SF.net email is sponsored by:
> > SourcForge Community
> > SourceForge wants to tell your story.
> > http://p.sf.net/sfu/sf-spreadtheword
> > _______________________________________________
> > Opensipstack-osbcdevel mailing list
> > Ope...@li...
> > https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel
> >
>
>