Re: [OpenSBC] SipX<=>OpenSBC: inbound route doesn't work

[Joegen E. B. <joe...@gm...>]

Hi,

I have seen the log.  Form what I could tell, you are trying to place an 
inbound call to a sip-trunk via the main trunk sip listener.  That will 
not be processed as an inbound trunk call.  Instead it will be processed 
as outbound.  So there is a screw up somewhere.    Make sure to send 
inbound calls to a siptrunk via the sip-trunk listener.

I am also not 100% clear what your setup is.  If you could send a 
detailed call diagram of what you want to achieve, so much the better.

Joegen


OpenSBC Forum wrote:
> I added B2BUA route [sip:100] sip:sipx.ebc.fleurop
>
>
> Unfortunately it didn't help. I will send the logby mail.
>
>
> Thanks for reply. 
>
>
>
>