Re: [OpenSIPStack] sipXecs and openSBC

[voice <vo...@ne...>]

Hi Joegen

I'ts been over  14 months now.  Have you guys completed testing the
Pingtel/sipX PBX and removing the SIP Trunk registration requiement?  I
believe your sip trunk feature was forcing registration via
username/password, which cause some SIP Trunk provider to choke on.

r


----- Original Message ----- 
From: "Joegen E. Baclor" <joe...@gm...>
To: <ope...@li...>
Sent: Wednesday, August 22, 2007 8:52 PM
Subject: Re: [OpenSIPStack] sipXecs and openSBC


> voice wrote:
> > Hi
> >
> > I have setup a sipXecs box and a standalone openSBC box.
> >
> > i want to use the sipX 'SIP Trunk' Gateway to define and point to
openSBC from sipX.
> >
> > My goal is to use sipX to register USERS and PHONES and to use openSBC
to pass SiP traffic to remote SBC, which will handle DID < == > PSTN
> >
> > ATA <==> sipX <==> openSBC <==> SBC/PSTN
> >
> > Can this be done with openSBC in the middle?
> >
> > How do i set up openSBC to do 'SIP egress and ingress TRUNKing'?
> >
>
>
> If you are pertaining to the SIP Trunking being discussed in the sipX
> user list, then this functionality is not yet complete.   However,
> OpenSBC can already be used for basic trunking needs like traversing NAT
> and routing to your carrier as a B2BUA.  If your carrier needs to do a
> separate authentication, then you must wait till  I announce the
> trunking feature completion.   This will happen soon so watch this space.
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel