Re: [OpenSIPStack] OpenSBC failover behavior

[<jo...@op...>]

Hi Ron,

Whats the value of your SIP-Timer-H parameter in 
OpenSBC-General-Parameters?   It normally defaults to 32 seconds which 
is higher than the 30 second Alerting-Timeout.   If you want the INVITE 
to failover, you need to set the value of SIP-Timer-H to something like 
8 seconds or you could set the Seize and Alerting timeout with higher 
values.

HTH,

Joegen

Ronald de Jesus wrote:
> I notice a problem in opensbc Version: 1.1.5-4 that it doesn't try the 
> failover route if the first route do not respond with any error 
> message from its SIP Invite.
>
> Sample static route below
>
> [sip:8004466513*] sip:70.42.72.57,sip:70.42.72.165
>
>
> Attach file: failover1 file -> opensbc fails to route the call to 2nd 
> route. It just
> keep resending SIP Invite 3 times and disconnects the call.
>
> failover3 file -> opensbc reroute the call to failover route. This is
> after first route sends 487 error.
>
>
>
>
>
> Regards
> Ron
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> ------------------------------------------------------------------------
>
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.169 / Virus Database: 270.6.21/1677 - Release Date: 9/17/2008 5:07 PM
>