Re: [OpenSIPStack] creating multiple UAs

[<jo...@op...>]

Hikmet Cengiz wrote:
> Hi Joegen,
>
> I can have OpenSBC to register to our usual SIP Server for a couple of
> accounts using sip trunk config. This part is fine.
>
> However, I'm confused what the *config parameters for the softphone* should
> be (UserID, AccountID, Password, Registrar and outboundProxy) to use these
> trunk accounts.
>
> Based on this sample xml:
>
> <siptrunk trunk-name="mysipserver.com" route-set="mysipserver.com"
> sip-domain="mysipserver.com" expires="10">
>
> <trunk-accounts>
>
> <account user-name="1001" auth-user-name="1001" auth-password="1001"
> inboundroute="sip:90...@ex..." expires="3600" />....
> For instance, this one is not working...
>   


The inbound route maps 10...@my... to 90...@ex...
In the above example, it is assumed that example.solegy.com is a host 
that resolves to the OpenSBC main trunk.



> SOFTPHONE CONFIG:
> UserID: 1001
> AccountID: 1001
> Password: 1001
> Registrar: example.solegy.com
> OutboundProxy: localhost
>   


You must register your softphone as 9001 not 1001.  Be sure that 9001 
has an account configured in Local Domain accounts.


> Thanks...
> Hikmet Cengiz
>
> On Tue, Feb 19, 2008 at 6:57 AM, jo...@op... <
> joe...@gm...> wrote:
>
>   
>> Hikmet Cengiz wrote:
>>     
>>> Thanks Joegen!
>>>
>>> So if SIP Trunking is meant for enabling multiple UA purpose, it would
>>>       
>> be a
>>     
>>> great idea to use openSBC and atlsip all together in my application.
>>>
>>> -As SIP Trunking is a new term for me, could you please give an example
>>>       
>> how
>>     
>>> to configure OpenSBC SIP Trunk? (Would normally not ask this question,
>>>       
>> but
>>     
>>> could not find a specific page at OpenSBC HTTP Admin site)
>>>
>>>       
>> There is a short tutorial here about SIP trunks
>> http://www.opensourcesip.org:8080/clearspacex/docs/DOC-1040
>>
>> CAVEAT:  when pasting the XML onto HTTP admin, make sure you enclose it
>> with <root>  </root> or the XML parser won't recognize your config
>>     
>>> -And instead of registering to my usual SIP Server, do I have to
>>>       
>> register to
>>     
>>> my local OpenSBC in this case?
>>>       
>> Yes.  You register to OpenSBC and let OpenSBC register on your behalf to
>> the SIP provider.
>>
>>     
>>>  How will the atlsip instance identify each
>>> user?
>>>
>>>       
>> You may need to modify OpenSBC a bit and add a custom header that would
>> preserve the original request-uri.  Trace through
>>
>> BOOL SBCSIPTrunkRoutingHandler::B2BRouteCall(
>>  B2BUAConnection & connection,
>>  SIPMessage & invite,
>>  BOOL /*ignoreRegistrations*/
>>  )
>>
>>
>>     
>>> Thanks!
>>> Hikmet Cengiz
>>>
>>>
>>> On Feb 19, 2008 5:45 AM, Joegen E. Baclor <joe...@gm...>
>>>       
>> wrote:
>>     
>>>       
>>>> Hikmet Cengiz wrote:
>>>>
>>>>         
>>>>> Hi everyone,
>>>>>
>>>>> For a load test project I am in need of creating multiple softphone
>>>>> instances in my application. (using either atlsiplib.dll or
>>>>>
>>>>>           
>>>> axatlsiplib.dll)
>>>>
>>>>         
>>>>> I think opensipstack is not designed to be used this way, (i.e.
>>>>>
>>>>>           
>>>> regardless
>>>>
>>>>         
>>>>> of how many instances are created, all are the same objects; hence
>>>>>
>>>>>           
>>>> singleton
>>>>
>>>>         
>>>>> pattern)
>>>>>
>>>>> 1) What needs to be done to enable instantiating many of these UA's
>>>>>           
>> all
>>     
>>>> of
>>>>
>>>>         
>>>>> which can have different accountIDs, registrars etc and all can
>>>>>
>>>>>           
>>>> register,
>>>>
>>>>         
>>>>> place calls or accept calls independent of each other?
>>>>>
>>>>>
>>>>>           
>>>> OpenSBC SIP Trunking feature does exactly this.
>>>>
>>>>
>>>>
>>>>         
>>>>> 2) Will this cause any conflicts using the system resources?
>>>>>
>>>>>
>>>>>           
>>>> Why don't you run both your softphone and OpenSBC in the same PC.
>>>> Configure opensbc SIP Trunk to send a number of registration for
>>>> multiple UA.  You can then map these accounts to your ATLSIP softphone
>>>> instance.
>>>>
>>>> With little imagination, you can even combine OpenSBC and ATLSIP and
>>>> function as one application.
>>>>
>>>>
>>>>
>>>>         
>>>>> Many thanks in advance!
>>>>> Any ideas- suggestions for load test in OSS are welcomed.
>>>>>
>>>>> Hikmet Cengiz
>>>>>
>>>>>
>>>>>           
>> -------------------------------------------------------------------------
>>     
>>>>> This SF.net email is sponsored by: Microsoft
>>>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>>>> _______________________________________________
>>>>> opensipstack-devel mailing list
>>>>> ope...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>           
>> -------------------------------------------------------------------------
>>     
>>>> This SF.net email is sponsored by: Microsoft
>>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>>> _______________________________________________
>>>> opensipstack-devel mailing list
>>>> ope...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>>
>>>>
>>>>         
>> -------------------------------------------------------------------------
>>     
>>> This SF.net email is sponsored by: Microsoft
>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>> _______________________________________________
>>> opensipstack-devel mailing list
>>> ope...@li...
>>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>>
>>>
>>>
>>>
>>>       
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> opensipstack-devel mailing list
>> ope...@li...
>> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>>
>>     
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> opensipstack-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensipstack-devel
>
>
>
>