SDC / 11073-10207 Revision / #36 LifeTimePeriod should start with DeterminationTime

Stefan Schlichting - 2020-08-20

labels: LifeTimePeriod --> LifeTimePeriod, Figure 8

status: open --> accepted
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Stefan Schlichting - 2020-08-20

Accepted.
Change Figure 8 to let the LifeTimePeriod start from DeterminationTime.

~~maybe change to StopTime instead of DeterminationTime.~~

Last edit: Björn Andersen 2024-01-08

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Björn Andersen - 2021-05-03

~~In addition, add a note that explains why LifeTimePeriod should (but not necessarily has to) end after the next DeterminationTime (race condition).~~

Last edit: Björn Andersen 2024-01-08

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Björn Andersen - 2024-01-08
  
  Covered in MPKP:TR0210 Note 2.
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Björn Andersen - 2022-03-25

Milestone: Corrigenda --> Revision
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Björn Andersen - 2022-11-21

Milestone: Revision Draft 1 --> untriaged
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

summary: Lifetimeperiod should start would determinationtime --> LifeTimePeriod should start with DeterminationTime
Description has changed:

Diff:

--- old
+++ new
@@ -1,3 +1,3 @@
-In Figure the Lifetimeperiod is indicated to start at the Starttime. This is not in alignment with the defintiion of LifeTimePeriod that says &#34;defines the duration after the measured METRIC value is not useful anymore.&#34;
+In Figure the LifeTimePeriod is indicated to start at the StartTime. This is not in alignment with the definition of LifeTimePeriod that says &#34;defines the duration after the measured METRIC value is not useful anymore.&#34;

 Change Figure 8 to let the LifeTimePeriod start from DeterminationTime.

assigned_to: David --> nobody
Milestone: untriaged --> Corrigendum

Björn Andersen - 2024-01-08

status: accepted --> solved

assigned_to: David
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

David - 2024-04-11

status: solved --> in-progress
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

David - 2024-04-11

See https://github.com/ornet-ev/biceps/pull/307

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

David - 2024-05-07

status: in-progress --> closed
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

LifeTimePeriod should start with DeterminationTime

SDC facilitates development of dist. systems of medical devices.

Milestone

Searches

Help

#36 LifeTimePeriod should start with DeterminationTime

Discussion