Re: [Opensc-devel] OpenCT - Aladdin eToken PRO

[Douglas E E. <dee...@gm...>]

0x8010002e is SCARD_E_NO_READERS_AVAILABLE So it looks like pcscd is running, but it can not find any readers.

Sounds like an install problem on FreeBSD
Google for: pcsc FreeBSD no readers

This shows a number if possible problems inclulding:

https://forums.freebsd.org/threads/card-reader.53496/


pcscd also has some traces. see -d option

It could also be a permission problem, some other application grabbing the reader before pcscd or
as one of teh above says, the installation order: pcsc first, then CCID


On 5/27/2018 12:15 AM, Steve Goldthorp wrote:
> 
> Entering my ATR returns 'Siemens CardOS M 4.01 (SLE66CX320P)'
> 
> All indications that I can see say it should be supported, but I cannot find any information on how to configure ‘things” to make it work…
> 
> 
> I have rebuilt my FreeBSD system to use pcsc and installed ccid drivers (pkg install ccid), when I run opens-tools -l I get no readers found.
> 
> Attached is the log file
> 
> 
> 
> 
> 
> 
> On 27 May 2018, at 12:52 am, Douglas E Engert <dee...@gm...> wrote:
> 
> How to get debugging info:
> 
> https://github.com/OpenSC/OpenSC/wiki/Using-OpenSC
> 
> Have you tried using pcsc in place of openct?
> 
> See if your card is supported:
> https://github.com/OpenSC/OpenSC/wiki/Aladdin-eToken-PRO
> 
> Enter your ATR here for more info:
> https://smartcard-atr.appspot.com
> 
> On 5/26/2018 7:33 AM, Steve Goldthorp wrote:
>> Hello,
>> I seem to be going around in circles trying to find out why my installation of openct and opensc don’t appear to be working.
>> I’m using FreeBSD 11.1
>> Below are the commands I’ve issued to try and see where it fails, but I really don’t know where to look next, any help will be greatly appreciated.
>> --------------------
>> ~ # dmesg | tail
>> ugen0.4: <AKS eToken Pro 4254> at usbus0
>> ~ # /usr/local/etc/rc.d/openct start
>> Starting openct.
>> ~ # openct-tool -v
>> OpenCT 0.6.20
>> ~ # openct-tool list
>> 0 Aladdin eToken PRO
>> ~ # openct-tool atr
>> Detcted Aladdin eToken PRO
>> Card present, status changed
> 
>> ATR: 3b f2 98 00 ff c1 10 31 fe 55 c8 03 15
>> ~ # opensc-tool -i
>> OpenSC 0.16.0 [gcc 4.2.1 Compatible FreeBSD Clang 4.0.0 (tags/RELEASE_400/final 297347)]
>> Enabled features: locking zlib openssl openct
>> ~ # opensc-tool -l
>> # Detected readers (openct)
>> Nr.  Card  Features  Name
>> 0    Yes             Aladdin eToken PRO
>> 1    No              OpenCT reader (detached)
>> ~ # opensc-tool -a
>> Using reader with a card: Aladdin eToken PRO
>> Failed to connect to card: Card command failed
>> ~ # pkcs11-tool -lt
>> error: PKCS11 function C_GetSlotInfo failed: rv = CKR_GENERAL_ERROR (0x5)
>> Aborting.
>> --------------------
>> Thanks and Regards,
>> Steve
>> If you have received this message in error, please reply to this e-mail to notify the sender of its incorrect delivery, and then delete both it and your reply. Thank you.
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Opensc-devel mailing list
>> Ope...@li...
>> https://lists.sourceforge.net/lists/listinfo/opensc-devel
> 
> 
> 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> 
> 
> 
> _______________________________________________
> Opensc-devel mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/opensc-devel
> 

-- 

  Douglas E. Engert  <DEE...@gm...>