Menu
▾
▴
Re: [Opensc-devel] new AK910 reader spotted
|
From: Umberto R. a. U. <op...@gt...> - 2017-10-20 14:08:20
|
Sorry, wrong list. I just posted this one to the PCSC-Muscle list On 10/20/2017 03:22 PM, Umberto Rustichelli aka Ubi wrote: > Dear developers, > > I just stumbled on a smart card reader that should be an AK910, that > is packed with a hub plus storage, I think it would be a good thing to > have it supported. > > The seller page is https://www.pec.it/cns-arubakey.aspx (sorry, > language is Italian). > > The vendorID:deviceID are 2021:0002 (I see CCID has provisions for > 0001, 0011 and 0101 but not 0002). > > > This is what I read in the logs at insertion time: > > Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: new high speed USB > device number 12 using xhci_hcd > Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: New USB device > found, idVendor=058f, idProduct=6254 > Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: New USB device > strings: Mfr=0, Product=0, SerialNumber=0 > Oct 20 16:39:40 pes-app-blank-01 kernel: usb 1-11: configuration #1 > chosen from 1 choice > Oct 20 16:39:40 pes-app-blank-01 kernel: hub 1-11:1.0: USB hub found > Oct 20 16:39:40 pes-app-blank-01 kernel: hub 1-11:1.0: 4 ports detected > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: new high speed > USB device number 13 using xhci_hcd > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: New USB device > found, idVendor=1307, idProduct=0165 > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: New USB device > strings: Mfr=1, Product=2, SerialNumber=3 > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: Product: USB Mass > Storage Device > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: Manufacturer: > USBest Technology > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: SerialNumber: > 000000000002BA > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.1: configuration #1 > chosen from 1 choice > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: new full speed > USB device number 14 using xhci_hcd > Oct 20 16:39:41 pes-app-blank-01 kernel: Initializing USB Mass Storage > driver... > Oct 20 16:39:41 pes-app-blank-01 kernel: scsi7 : SCSI emulation for > USB Mass Storage devices > Oct 20 16:39:41 pes-app-blank-01 kernel: usbcore: registered new > interface driver usb-storage > Oct 20 16:39:41 pes-app-blank-01 kernel: USB Mass Storage support > registered. > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: New USB device > found, idVendor=2021, idProduct=0002 > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: New USB device > strings: Mfr=1, Product=2, SerialNumber=0 > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: Product: HKey > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: Manufacturer: AK910 > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: configuration #1 > chosen from 1 choice > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: ep 0x2 - rounding > interval to 64 microframes, ep desc says 80 microframes > Oct 20 16:39:41 pes-app-blank-01 kernel: usb 1-11.2: ep 0x82 - > rounding interval to 64 microframes, ep desc says 80 microframes > Oct 20 16:39:41 pes-app-blank-01 kernel: generic-usb > 0003:2021:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [AK910 > HKey] on usb-0000:00:14.0-11.2/input0 > Oct 20 16:39:42 pes-app-blank-01 kernel: scsi 7:0:0:0: > Direct-Access 0.00 PQ: 0 ANSI: 2 > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: Attached scsi > generic sg2 type 0 > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] 1972744 > 512-byte logical blocks: (1.01 GB/963 MiB) > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Write > Protect is off > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Oct 20 16:39:42 pes-app-blank-01 kernel: sdb: > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Assuming > drive cache: write through > Oct 20 16:39:42 pes-app-blank-01 kernel: sd 7:0:0:0: [sdb] Attached > SCSI removable disk > > > This is the lsusb output: > > > > Bus 001 Device 013: ID 2021:0002 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x2021 > idProduct 0x0002 > bcdDevice 1.00 > iManufacturer 1 AK910 > iProduct 2 HKey > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 41 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > (Bus Powered) > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.00 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 34 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 10 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 10 > Device Status: 0x0000 > (Bus Powered) > > Best regards > > Umberto Rustichelli > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Opensc-devel mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/opensc-devel > > -- > Questo messaggio e' stato analizzato con Libra ESVA ed e' risultato > non infetto. > Seguire il link qui sotto per segnalarlo come spam: > https://esva.gt50.org/cgi-bin/learn-msg.cgi?id=37626400C3.AB22C > > |
