Re: [Opensc-devel] OpenSC with qemu (Gemplus support)

[Anton G. <an...@ad...>]

Sorry, the problem was that I was building OpenSC without pcsc support.
Now pkcs11-tool shows the card reader as empty:
 
  Slot 0 (0x0): Generic CCID Reader [CCID Interface]
(1-0000:00:01.2-2.1) 00 00
  (empty)

But that is a different problem. Thank you.

Best,
Anton Gerasimov


On 09/06/2017 04:36 PM, Anton Gerasimov wrote:
> I don't have a physical token, what I'm trying to do is to emulate one
> using (approximately) this manual [1]. Unfortunately Qemu seems to be
> able to emulate just that one device type, so I don't have much choise here.
>
> After some new tries pcscd gives some output that as far as I understand
> indicates that it has made contact to the virtual card (attached), but
> opensc-tool still only shows OpenCT readers.
>
> 'opensc-tool -a' doesn't show anything useful as well:
>   $ opensc-tool -a
>      Card not present.
>
> Regarding the versions:
>
> OpenSC: 0.16.0
> OS: Linux v4.4.60 (Openembedded/Yocto build).
> OpenCT: 0.6.20
> PCSClite: 1.8.13
>
> Thanks,
> Anton
>
> [1]: https://github.com/qemu/qemu/blob/master/docs/ccid.txt
> On 09/06/2017 03:51 PM, Douglas E Engert wrote:
>> Your command only list the readers, and it also says you are using the
>> OpenCT
>> rather the PCSClite.
>>
>> What versions of software are you using?
>> OpenSC, OS, OpenCT, PCSClite?
>>
>> You said you are trying to use qemu. I use virtual Box, which presents
>> to the
>> virtual machine the real ID of a reader. I am not sure if qemu does
>> that or presents
>> a generic reader with ID 08e6:4433.
>>
>> The lsusb just says what type of reader. Are you using some token with
>> a built in reader?
>> If so what is it?
>>
>> What token are you using? The OpenSC driver Gemplus-GPK-16k is very
>> old and was a card.
>>
>>
>> to list the atr, try:
>> opensc-tool -a
>>
>> Also look at using OpenSC debug in config file see:
>>
>> https://github.com/OpenSC/OpenSC/wiki/Using-OpenSC
>>
>>
>> On 9/6/2017 7:48 AM, Anton Gerasimov wrote:
>>> Hi,
>>>
>>> I'm trying to get OpenSC working with qemu (qemu-system-x86_64). It
>>> emulates Gemplus token (lsusb output: 'ID 08e6:4433 Gemalto (was
>>> Gemplus) GemPC433-Swap'), and it is unclear to me if it is supported in
>>> OpenSC. It is listed as unsupported hardware [1], but the page for
>>> Gemplus itself says it is supported [2].
>>>
>>> If it is not, I would be grateful for any hints about how qemu and
>>> OpenSC can be put to work together. opensc-tool --list-readers currently
>>> gives
>>>
>>>    # Detected readers (openct)
>>>    Nr.  Card  Features  Name
>>>    0    No              OpenCT reader (detached)
>>>    1    No              OpenCT reader (detached)
>>>
>>> which as far as I understands means it can't detect any devices.
>>>
>>> Thanks,
>>> Anton Gerasimov
>>>
>>> [1]
>>> https://github.com/OpenSC/OpenSC/wiki/Supported-hardware-(smart-cards-and-USB-tokens)
>>>
>>> [2] https://github.com/OpenSC/OpenSC/wiki/Gemplus-GPK-16k
>>>
-- 
Anton Gerasimov, ATS Advanced Telematic Systems GmbH
Kantstrasse 162, 10623 Berlin
Managing Directors: Dirk Pöschl, Armin G. Schmidt
Register Court: HRB 151501 B, Amtsgericht Charlottenburg