[Opensc-devel] How to find "hidden" ID-One Cosmo reader on Crypt Smart R2 microSD

[Anthony A. <asc...@gm...>]

Hi list,

I have a microSD card "crypt smart R2",  card, which has a combo
ID-One Cosmo reader
and a Oberthur 128k v7 smartcard.

When plugged into a generic USB media reader, only a storage device appears.

Under Windows, after installing the ID-One Cosmo microSD Driver, both
a smartcard reader and
smartcard device appear in Device Manager.
 1. A removable media device appears
 2. Smart card readers: ID-One Cosmo microSD Reader Driver
 3. Smart cards: ActivIdentity Mini Driver (Oberthur ID-One Cosmo v7.0 128K)

Is there a way to get OpenSC to "see" the ID-One Cosmo smartcard/reader combo?

Here is the storage dmesg

lsusb
Bus 001 Device 044: ID 090c:6200 Silicon Motion, Inc. - Taiwan
(formerly Feiya Technology Corp.) microSD card reader

usb 1-13: new high-speed USB device number 44 using xhci_hcd
usb 1-13: New USB device found, idVendor=090c, idProduct=6200
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-13: Product: Generic USB2.0 card
usb 1-13: Manufacturer: Silicon Motion, Inc.
usb 1-13: SerialNumber: 12345678901234567890
usb 1-13: ep 0x81 - rounding interval to 128 microframes, ep desc says
255 microframes
usb 1-13: ep 0x2 - rounding interval to 128 microframes, ep desc says
255 microframes
usb-storage 1-13:1.0: USB Mass Storage device detected
scsi host89: usb-storage 1-13:1.0
scsi 89:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0
ANSI: 0 CCS
sd 89:0:0:0: Attached scsi generic sg5 type 0
sd 89:0:0:0: [sdd] 3874816 512-byte logical blocks: (1.98 GB/1.84 GiB)
sd 89:0:0:0: [sdd] Write Protect is off
sd 89:0:0:0: [sdd] Mode Sense: 4b 00 00 08
sd 89:0:0:0: [sdd] No Caching mode page found
sd 89:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 89:0:0:0: [sdd] Attached SCSI removable disk



Regards
Anthont