[Opensc-devel] jcop-4.1 card, i presume

[<J.W...@mi...>]

Log attached..
-----Original Message-----
From: Ludovic Rousseau [mailto:lud...@gm...] 
Sent: Tuesday, April 09, 2013 10:52 AM
To: Witvliet, J, CDC/IV/DCOPS/I&S/HIN
Subject: Re: jcop-4.1 card, i presume

2013/4/8 <J.W...@mi...>
> Hi Dr Rousseau,

Hello,

> Curious situation:
> The pcscd log is able to determine the ATR, but opensc-tool -a not.

That is strange.

> pcsc-deamon log:
> Apr  8 17:05:39 kc0064 pcscd: Card ATR: 3B FA 18 00 FF 81 31 FE 45 4A 43 4F 50 34 31 56 32 33 31 63
> [correct ATR-string, I presume, is said to be "A jcop card"]
>
> But opensc:
> (basic functionality)
>
> root@kc0064:~# opensc-tool -v -a
> Using reader with a card: SCM SCR 355 00 00
> Connecting to card in reader SCM SCR 355 00 00...
> [opensc-tool] card-default.c:113:default_init: unable to determine the right class byte
> [opensc-tool] card.c:202:sc_connect_card: driver 'Default driver for unknown cards' init() failed: Card is invalid or cannot be handled
> [opensc-tool] card.c:213:sc_connect_card: unable to find driver for inserted card
> [opensc-tool] card.c:228:sc_connect_card: returning with: Card is invalid or cannot be handled
> Failed to connect to card: Card is invalid or cannot be handled
>
>
> I know that I need AET's safe-sign drivers, but as even basic functionality (like asking ATR) fails...
> According to your list, it is an "jcop41 V2.3.1 dual interface 72K nxp smartMX javacard-openplatform"
>
> Any suggestions?

Increase the verbose level of opensc-tool using: opensc-tool -vvvvvvvv -a

You should report the problem on the OpenSC-devel mailing list.

=======================================================================
-----Original Message-----

Ok,

To be brief, tested on ubuntu-10.10 and 12.10, openSUSE_12.2
All yield the same :-(

Latest opensc version available from distro: 0.12.2

So, is this a card that is only supported since 0.13, or do I have a "bigger challenge"
As in: "not supported at all"


Hans.


______________________________________________________________________
Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het electronisch verzenden van berichten.

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.