[openorb-general] restrict port range used by CORBA

[JC T. <jc...@pa...>]

Greetings folks


I have got an urgent problem I hope someone out there has already come=20
accross.


Basically I would like to know if one can specify/restrict the range of p=
orts=20
that can be used=20
between the client and the server during ORB comm across the network.

For security and firewall requirement, I would like to have controle over=
 the=20
port range in use by CORBA.=20

I see that the initial comm is carried accross dynamic ports before reach=
ing=20
GIOP step.Best Regards.

JC.

PS: I am using xindice over corba.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
jc...@pa...
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D