Re: [Openocd-development] stellaris oddity

[Michael S. <rin...@di...>]

Michael Schwingen wrote:
> I just noticed there is an errata "JTAG pins do not have internal pull-ups enabled at power-on reset" for the LM3S6918-A2, and the RDK-IDM board does not have the recommended pullups on all pins. 
> I'll try and add those resistors to the JTAG port tomorrow and see if that helps, although I doubt it - TRST (which is not connected to the JTAG connector), and SRST *do* have resistors, and the other pins should be actively driven by the JTAG adapter anyway.
>   
Okay, I added 10k pullup resistors - es expected, it still does not work.

However, I had the possibility to test the target using a BDI2000 with 
cortex-M3 firmware today - that works fine, so the problem is not the 
target or board but openocd.

cu
Michael